SIST EN 2266-007:2006

Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 007: UV laser printable multicore jacketed cable - Product standard

This standard specifies the characteristics of UV laser printable multicore jacketed electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between - 55 °C and 200 °C.
It shall also be possible to mark these cables by hot stamp printing or ink jet printing. These markings shall be in accordance with EN 3838.

Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil 007: UV-Laser-bedruckbare, mehradrige ummantelte Leitungen - Produktnorm

Diese Norm legt die Eigenschaften von UV Laser-bedruckbaren, mehradrigen, ummantelten elektrischen Leitungen zur Verwendung in Bordnetzen von Luftfahrzeugen bei Betriebstemperaturen zwischen - 55 °C und 200 °C fest.
Es muss auch möglich sein, diese Leistungen mittels Heißprägung oder Tintenstrahldruck zu kennzeichnen. Diese Kennzeichnungen müssen die Anforderungen von EN 3838 erfüllen.

Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 007 : Multiconducteurs gainés marquables au laser UV - Norme de produit

Aeronavtika – Električni kabli za splošne namene – Delovne temperature med –55 °C in 200 °C – 007. del: Večžilni oplaščeni kabli z možnostjo UV-laserskega tiskanja – Standard za proizvod

General Information

• Status: Published
• Publication Date: 30-Jun-2006
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jul-2006
• Due Date: 01-Jul-2006
• Completion Date: 01-Jul-2006
• Ref Project: EN 2266-007:2005 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 007: UV laser printable multicore jacketed cable - Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 007: UV laser printable multicore jacketed cable - Product standardSérie aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 007 : Multiconducteurs gainés marquables au laser UV - Norme de produitLuft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil 007: UV-Laser-bedruckbare, mehradrige ummantelte Leitungen - ProduktnormTa slovenski standard je istoveten z:EN 2266-007:2005SIST EN 2266-007:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 2266-007:200601-julij-2006







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2266-007
November 2005 ICS 49.060 English Version
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 007: UV laser printable multicore jacketed cable - Product standard
Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 007 : Multiconducteurs gainés marquables au laser UV - Norme de produit
Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine VerwendungBetriebstemperaturen zwischen - 55 °C und 200 °C - Teil 007: UV Laser bedruckbare Mehradrige ummantelte Leitungen - Produktnorm This European Standard was approved by CEN on 30 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2266-007:2005: E



EN 2266-007:2005 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Materials and construction.4 5 Required characteristics.6 6 Quality assurance.7 7 Designation.8 8 Identification and marking.8 9 Packaging, labelling and delivery lengths.8 10 Technical specification.8



EN 2266-007:2005 (E) 3 Foreword This European Standard (EN 2266-007:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 2266-007:2005 (E) 4 1 Scope This standard specifies the characteristics of UV laser printable multicore jacketed electrical cables for use in the on-board electrical systems of aircraft at operating temperatur
...