SIST EN ISO 11126-6:1997

Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993)

This part of ISO 11126 specifies requirements for iron furnace slag abrasives, as supplied for blast-cleaning processes. It specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides.

Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Anforderungen an nichtmetallische Strahlmittel - Teil 6: Strahlmittel aus Hochofenschlacke (ISO 11126-6:1993)

Dieser Teil von ISO 11126 legt Anforderungen für Strahlmittel aus Hochofen- schlacke fest. Er legt Bereiche für die Korngrösse und Grenzwerte für schainbare Dichte, Härte, Feuchtegehalt, Leitfähigkeit des wässrigen Eluates (wasserlösliche Verunreinigungen) und wasserlösliche Chloride fest.

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Spécifications pour abrasifs non métalliques destinés a la préparation par projection - Partie 6: Scories de four de métallurgie (ISO 11126-6:1993)

La présente partie de l'ISO 11126 prescrit des exigences relatives aux abrasifs en scories de four de métallurgie, tels qu'ils sont fournis pour la préparation par projection. Elle spécifie les tailles de particules et les valeurs de masse volumique apparente, dureté Mohs, teneur en humidité, conductivité de l'extrait aqueux et teneur en chlorures solubles dans l'eau. Les spécifications prescrites dans la présente partie de l'ISO 11126 s'appliquent seulement aux abrasifs fournis à l'état neuf. Elles ne s'appliquent pas aux abrasifs pendant ou après utilisation. Les méthodes d'essai relatives aux abrasifs non métalliques destinés à la préparation par projection sont indiquées dans les différentes parties de l'ISO 11127.
NOTES 1 L'annexe A donne des informations sur les normes nationales généralement consultables portant sur les abrasifs non métalliques. 2 Quoique la présente partie de l'ISO 11126 ait été spécialement établie pour satisfaire aux exigences de préparation des tôleries, les propriétés prescrites seront généralement appropriées pour l'emploi en préparation de subjectiles ou éléments d'autres matériaux, par les techniques de décapage par projection. Ces techniques sont décrites dans l'ISO 8504-2:1992, Préparation des subjectiles d'acier avant application de peintures et de produits assimilés -- Méthodes de préparation des subjectiles -- Partie 2: Décapage par projection d'abrasif.

Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov - Specifikacije za nekovinske granulate za peskanje - 6. del: Železova pečna žlindra (ISO 11126-6:1993)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1997
• Withdrawal Date: 10-Oct-2018
• ICS: 25.220.10 - Surface preparation
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 10-Oct-2018
• Due Date: 02-Nov-2018
• Completion Date: 11-Oct-2018
• Ref Project: EN ISO 11126-6:1997 - Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993)

Relations

• Replaced By: SIST EN ISO 11126-6:2018 - Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron and steel slags (ISO 11126-6:2018)
• Effective Date: 01-Dec-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11126-6:1997
01-december-1997
3ULSUDYDMHNOHQLKSRGODJSUHGQDQDãDQMHPEDUYQLKLQVRURGQLKSUHPD]RY
6SHFLILNDFLMH]DQHNRYLQVNHJUDQXODWH]DSHVNDQMHGHOäHOH]RYDSHþQDåOLQGUD
,62
Preparation of steel substrates before application of paints and related products -
Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO
11126-6:1993)
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen -
Anforderungen an nichtmetallische Strahlmittel - Teil 6: Strahlmittel aus
Hochofenschlacke (ISO 11126-6:1993)
Préparation des subjectiles d'acier avant application de peintures et de produits
assimilés - Spécifications pour abrasifs non métalliques destinés a la préparation par
projection - Partie 6: Scories de four de métallurgie (ISO 11126-6:1993)
Ta slovenski standard je istoveten z: EN ISO 11126-6:1997
ICS:
25.220.10 Priprava površine Surface preparation
SIST EN ISO 11126-6:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11126-6:1997

---------------------- Page: 2 ----------------------

SIST EN ISO 11126-6:1997

---------------------- Page: 3 ----------------------

SIST EN ISO 11126-6:1997

---------------------- Page: 4 ----------------------

SIST EN ISO 11126-6:1997

---------------------- Page: 5 ----------------------

SIST EN ISO 11126-6:1997

---------------------- Page: 6 ----------------------

SIST EN ISO 11126-6:1997
INTERNATIONAL ISO
STANDARD 11126-6
First edition
1993-12-15
Preparation of steel Substrates before
application of paints and related
products - Specifications for non-metallic
blast-cleaning abrasives -
Part 6:
Iron furnace slag
Prdparation des subjectiles d’acier avant application de peintures et de
produits assimiks - Spkifica tions pour abrasifs non rne talliques
destinh 2 Ia prgparation par projection -
Partie 6: Stories de four de mhallurgie
Reference number
ISO 11126-6:1993(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 11126-6:1997
ISO 11126=6:1993[E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(1 EC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11126-6 was prepared by Technical Committee
ISO/TC 35, Paints and varnishes, Subcommittee SC 12, Preparation of
steel Substrates before application of paints and related products.
ISO 1% 126 consists of the following Parts, under the general title Prep-
aration of steel Substrates before application of paints and related
products - Specifica tions for non-metallic blas t-cleaning abrasives:
- Part 1: General in troduction and classifica tion
- Part 2:
Silica sand
- Part 3: Copper refinery slag
- Part 4: Coal furnace slag
- Part 5: Nickel refinery slag
- Part 6: Iron furnace slag
- Part 7: Fused aluminium Oxide
- Part 8: Olivine sand
- Part 9: Staurolite
0 ISO 1993
All rights reserved. Unless otherwise specified, no patt of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l Ct-M 21% Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 11126-6:1997
Q ISO ISO 11126=6:1993(E)
- Part 10: Garnet
At the time of publication of this part of ISO 11126, park 2, 7, 9 and 10
were in course of preparation.
Annex A of this part of ISO 1% 126 is for Information only.
. . .
Ill

---------------------- Page: 9 ----------------------

SIST EN ISO 11126-6:1997
This page intentionally left blank

---------------------- Page: 10 ----------------------

SIST EN ISO 11126-6:1997
ISO 11126-6:1993(E)
INTERNATIONAL STANDARD 0 ISO
Preparation of steel Substrates before application of
paints and related products - Specifications for
non-metallic blast-cleaning abrasives -
Part 6:
Iron furnace slag
WARNING - Equipment, materials and abrasives used for surface preparation tan be hazardous
if used carelessly. Many national regulations exist for those materials and abrasives that are
considered to be hazardous during or after use (waste management), such as free silica or
carcinogenic or toxic substances. These regulations are therefore to be observed. lt Os important
to ensure that adequate instructions are given and that all required precautions are exercised.
niques are described in ISO 8504-23992, Reparation of
1 Scope
steel substra tes before application of pain ts and related
products - Surface preparation methods - Part 2: Abras-
ive blas t-cleaning.
This part of lS0 11126 specifies requirements for iron
furnace slag abrasives, as supplied for blast-cleaning
processes. lt specifies ranges of particle sizes and
2 Normative references
values for apparent density, Mohs hardness, moisture
content, conductivity of aqueous extract and water-
The following Standards contain provisions which,
soluble chlorides.
through reference in this text, constitute provisions
of this part of ISO 11126. At the time of publication,
The requirements specified in this patt of ISO 11126
the editions indicated were valid. All Standards are
apply to abrasives supplied in the “new” condition
subject to revision, and Parties to agreements based
only. They do no% apply to abrasives either during or
on this part of ISO 11126 are encouraged to investi-
after use.
gate the possibility of applying the most recent edi-
tions of the Standards indicated below. Members of
Test methods for non-metallic blast-cleaning
IEC and ISO maintain registers of currently valid
abrasives are given in the various Parts of
International Standards.
ISO 11127.
NOTES ISO 11127-1 :1993, Preparation of steel Substrates
be fore applica tion o f paints and rel
...