iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1998-2:2006/A101:2007

Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges - National annex

Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges - National annex

Eurocode 8 - Auslegung von Bauwerken gegen Erdbeben - Teil 2: Brücken

Eurocode 8 - Calcul des structures pour leur résistance aux séismes - Partie 2: Ponts

Evrokod 8 - Projektiranje konstrukcij na potresnih območjih - 2. del: Mostovi - Nacionalni dodatek

(1)   Ta nacionalni dodatek vsebuje podatke o nacionalno določenih parametrih in o statusu dodatkov, ki jih je treba pri uporabi SIST EN 1998-2:2006 upoštevati v Sloveniji.
(2)   Za vsa mesta, kjer je dovoljena nacionalna izbira, so v SIST EN 1998-2:2006 podane opombe, seznam točk s temi opombami pa je podan v nacionalnem predgovoru k SIST EN 1998-2:2006.

General Information

Status
Published In Revision
ICS
91.120.25 - Seismic and vibration protection
93.040 - Bridge construction
Technical Committee
KON - Structures
Current Stage
9800 - Izvirni SIST/ privzeti tuji dokument - Periodični pregled (Local Project)
Start Date
15-Dec-2011
Due Date
26-Feb-2012
Completion Date
07-Nov-2013
Directive
TP001 - Pravilnik o mehanski odpornosti in stabilnosti objektov
TP237 - Pravilnik o spodnjem ustroju železniških prog
Ref Project

Buy Standard

EN 1998-2:2006/A101:2007EN 1998-2:2006/A101:2007
PreviousNext
National annex
EN 1998-2:2006/A101:2007
Slovenian language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN 1998-2:2006/oA101:2007EN 1998-2:2006/oA101:2007
PreviousNext
Draft
EN 1998-2:2006/oA101:2007
Slovenian language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

6/29(16.,6,67(1$67$1'$5'GHFHPEHU(YURNRG3URMHNWLUDQMHNRQVWUXNFLMQDSRWUHVQLKREPRþMLK±GHO0RVWRYL±1DFLRQDOQLGRGDWHN(XURFRGH'HVLJQRIVWUXFWXUHVIRUHDUWKTXDNHUHVLVWDQFH±3DUW%ULGJHV(XURFRGH&DOFXOGHVVWUXFWXUHVSRXUOHXUUpVLVWDQFHDX[VpLVPHV±3DUWLH3RQWV(XURFRGH$XVOHJXQJYRQ%DXZHUNHQJHJHQ(UGEHEHQ±7HLO%UFNHQ !"#-./01-2435679:;9<=5>?=882@BADC;CFEFGHIAJLKMNFOFPRQLSFTVUVUQLWYXUXZIXD[L\%SYX\RQL];\R^]DU[V\;_LU`NJFa\F[;bcQLNFdVPFOF\RQ`P%_VPDMNLXP%\DMUV];PDMNFOXP;e;\cSYX\RQL];\R^`PRQLNJ



6,67(1$1$&,21$/1,892''RSROQLOR6,67(1$VO(YURNRG3URMHNWLUDQMHNRQVWUXNFLMQDSRWUHVQLKREPRþMLK±GHO0RVWRYL±1DFLRQDOQLGRGDWHNLPDVWDWXVGRSROQLODNVWDQGDUGX6,67(11$&,21$/1,35('*29256ORYHQVNLQDFLRQDOQLVWDQGDUG6,67(1MHSULY]HWHYURSVNLVWDQGDUG(1NLJDMHSULSUDYLOWHKQLþQLRGERU(YURSVNHJDNRPLWHMD]DVWDQGDUGL]DFLMR&(17&.RQVWUXNFLMVNLHYURNRGLNDWHUHJDWDMQLãWYRMHYSULVWRMQRVWL%6,'RSROQLOR6,67(1$MHSULSUDYLOWHKQLþQLRGERU6,677&.21.RQVWUXNFLMHLQMHELORVSUHMHWRVHSWHPEUD7RGRSROQLORVHODKNRXSRUDEOMDVNXSDMVVWDQGDUGRP6,67(1R]LURPD(1NLYSRJODYMX1DFLRQDOQLGRGDWHNQDWDQþQRGRORþDSRJODYMD]DQDFLRQDOQRL]ELURDFLRQDOQDL]ELUDMHY(1GRYROMHQDY±±±3±±3±R±±3E±±3±±3±±±±3±±±±3±3±3±±±±±3±-DFLRQDOQLGRGDWHNYVHEXMHDOWHUQDWLYQHSRVWRSNHYUHGQRVWLLQSULSRURþLOD]DUD]UHGH]RSRPEDPLNLNDåHMRNMHHYURSVNLVWDQGDUGSUHGYLGHYDGDVHODKNRXYHOMDYLQDFLRQDOQDL]ELUD=DWRGRSROQLOR6,67(1$YVHEXMHQDFLRQDOQRGRORþHQHSDUDPHWUHNLMLKMHWUHEDXSRUDELWLSULSURMHNWLUDQMXVWDYELQJUDGEHQLKLQåHQLUVNLKREMHNWRY]JUDMHQLKY5HSXEOLNL6ORYHQLML9(=$=1$&,21$/1,067$1'$5'206,67(1(YURNRG3URMHNWLUDQMHNRQVWUXNFLMQDSRWUHVQLKREPRþMLK±GHO0RVWRYL2320%,±3RYVRGNMHUVHYEHVHGLOXVWDQGDUGDXSRUDEOMDL]UD]³HYURSVNLVWDQGDUG´Y6,67(1$WRSRPHQL³VORYHQVNLVWDQGDUG´±1DFLRQDOQLXYRGLQQDFLRQDOQLSUHGJRYRUQLVWDVHVWDYQLGHOVWDQGDUGD



6,67(1$1DFLRQDOQLGRGDWHNN6,67(1QRUPDWLYQL9VHELQDGRGDWND7DQDFLRQDOQLGRGDWHNYVHEXMHSRGDWNHRQDFLRQDOQRGRORþHQLKSDUDPHWULKLQRVWDWXVXGRGDWNRYNLMLKMHWUHEDSULXSRUDEL6,67(1XSRãWHYDWLY6ORYHQLML=DYVDPHVWDNMHUMHGRYROMHQDQDFLRQDOQDL]ELUDVRY6,67(1SRGDQHRSRPEHVH]QDPWRþNVWHPLRSRPEDPLSDMHSRGDQYQDFLRQDOQHPSUHGJRYRUXN6,67(11DFLRQDOQRGRORþHQLSDUDPHWULLQVWDWXVGRGDWNRYNLYHOMDMRY6ORYHQLML8YRGSRPEHN,QIRUPDWLYQLGRGDWNL$%&'()+--LQ.RGDWNL$%&'()+--LQ.VRY6ORYHQLMLLQIRUPDWLYQL2VQRYQH]DKWHYHLQNULWHULML]DL]SROQLWHY]DKWHYSRPEDN35HIHUHQþQDSRYUDWQDGRED7f!ghSRWUHVQHJDYSOLYD]D]DKWHYRSRQHSRUXãLWYLULY]DPHVHSULSRURþHQDYUHGQRVW7f!gh OHWNDUSUHGVWDYOMDYHUMHWQRVWSUHNRUDþLWYH3f!gh YOHWLKSRPEDN3.DWHJRULMHSRPHPEQRVWL]DPRVWRYHULY]DPHVHSULSRURþHQDUD]GHOLWHYYWULNDWHJRULMHSRPHPEQRVWLVSORãQHPVRPRVWRYLQDDYWRFHVWDKLQQDFLRQDOQLKFHVWDKWHUåHOH]QLãNLPRVWRYLXYUãþHQLYNDWHJRULMR,,SRYSUHþQDSRPHPEQRVWNDWHJRULMR,,,VRXYUãþHQLPRVWRYLNLVRNULWLþQL]DY]GUåHYDQMHNRPXQLNDFLMSRVHEQRYREGREMXWDNRMSRSRWUHVXPRVWRYLSULNDWHULKELSRUXãLWHYSRY]URþLODYHOLNRãWHYLORåUWHYLQSRPHPEQLPRVWRYL]DNDWHUHMH]DKWHYDQDåLYOMHQMVNDGREDGDOMãDRGQRUPDOQHRVWMHODKNRXYUãþHQYNDWHJRULMR,SRGSRYSUHþQDSRPHPEQRVWþHVWDL]SROQMHQDGYDSRJRMD±PRVWQLNULWLþHQ]DNRPXQLNDFLMH±L]ELUDUHIHUHQþQHYHUMHWQRVWLSUHNRUDþLWYH3f!ghSRWUHVQHJDYSOLYDYOHWLKDOLVWDQGDUGQHåLYOMHQMVNHGREHPRVWXOHWQLHNRQRPVNRXSUDYLþHQD.DWHJRULMHSRPHPEQRVWL,,,LQ,,,SULEOLåQRXVWUH]DMRUD]UHGRPJOHGHQDSRVOHGLFH&&&&LQ&&NLVRRSUHGHOMHQHY(1%SRPEDN.DWHJRULMHSRPHPEQRVWL]DPRVWRYHULY]DPHWDVHSULSRURþHQLYUHGQRVWL]DIDNWRUSRPHPEQRVWLiNL]QDãDWDLQ]DNDWHJRULMLSRPHPEQRVWL,LQ,,,



6,67(1$2SRPEDN3RJRML]DXSRãWHYDQMHSRWUHVQHJDYSOLYDNRWQH]JRGQHJDYSOLYDRWUHVQLYSOLYVHODKNRXSRãWHYDNRWQH]JRGQLYSOLY3ULPRVWRYLKNDWHJRULM,LQ,,VH]DKWHYHWRþNLQRPLOLMR3ULSRWUHVQHPYSOLYXVSRYUDWQRGRER7fgh OHWODKNRSULPRVWRYLKNDWHJRULM,LQ,,SULGHGRSRãNRGEYR]LãþQHNRQVWUXNFLMHLQQL]DKWHYDQRGDMHQXMHQSURPHWPRJRþWDNRMSRSRWUHVX3ULPRVWRYLKNDWHJRULMH,,,PRUDMRELWL]DKWHYHWRþNLQL]SROQMHQHSRPEDN'ROåLQDSODVWLþQLKþOHQNRYDGROåLQRSODVWLþQLKþOHQNRY/j]DEHWRQVNHHOHPHQWHVHXSRãWHYDSULSRURþHQL]UD]SRGDQYGRGDWNX(SRPEDN'HOHåLSURMHNWQHJDSRPLND]DQHNULWLþQHGHOHNRQVWUXNFLMHULY]DPHWDVHSULSRURþHQLYUHGQRVWLSk ]DSURMHNWQLSRWUHVQLSRPLNLQSl ]DWHPSHUDWXUQLSRPLNSRPELLQN3RHQRVWDYOMHQHSURMHNWQH]DKWHYHYSULPHUXQL]NHVHL]PLþQRVWLL]NDVHL]PLþQRVWMHRSUHGHOMHQDYQDFLRQDOQHPGRGDWNXN6,67(1RSRPEDN3URMHNWQLSRVSHãHNQDWOHKWLSD$WRMHYUHGQRVWSRGDQDYYHOMDYQLNDUWLSRWUHVQHQHYDUQRVWL6ORYHQLMHQLYHþMLRGJ3RYHOMDYQLNDUWL3RWUHVQDQHYDUQRVW6ORYHQLMH±3URMHNWQLSRVSHãHNWDO0238SUDYD]DJHRIL]LNRY6ORYHQLMLQLREPRþLM]QL]NRVHL]PLþQRVWMR3RWUHVQLYSOLYSRPEDN'HILQLFLMDDNWLYQHJDSUHORPDULWHM]DKWHYLVHSULY]DPHGDMHVHL]PRWHNWRQVNLSUHORPDNWLYHQþHSRYSUHþQ
...




6/29(16., 6,67(1R$
 
67$1'$5' 
VHSWHPEHU
 




    
    
    
    
    
 

 (YURNRG3URMHNWLUDQMHNRQVWUXNFLMQDSRWUHVQLKREPRþMLK±
 GHO0RVWRYL±1DFLRQDOQLGRGDWHN

 (XURFRGH'HVLJQRIVWUXFWXUHVIRUHDUWKTXDNHUHVLVWDQFH±3DUW%ULGJHV


 (XURFRGH&DOFXOGHVVWUXFWXUHVSRXUOHXUUpVLVWDQFHDX[VpLVPHV±
 3DUWLH3RQWV

 (XURFRGH$XVOHJXQJYRQ%DXZHUNHQJHJHQ(UGEHEHQ±7HLO%UFNHQ


 
 












 
 


 
 5HIHUHQþQDR]QDND
 ,&6  6,67(1R$ VO 
 

 1DGDOMHYDQMHQDVWUDQHKRGGR
 


������������������������������������������������������������� �������!��"�#��$%����&’����(��������)"��!�������������*��������+���,�������������� ���-���*���������"�����#�

---------------------- Page: 1 ----------------------
6,67(1$
1$&,21$/1,892'
'RSROQLOR6,67(1$ VO (YURNRG3URMHNWLUDQMHNRQVWUXNFLMQDSRWUHVQLKREPRþMLK
±GHO0RVWRYL±1DFLRQDOQLGRGDWHNLPDVWDWXVGRSROQLODNVWDQGDUGX6,67(1
1$&,21$/1,35('*2925
6ORYHQVNLQDFLRQDOQLVWDQGDUG6,67(1MHSULY]HWHYURSVNLVWDQGDUG(1NLJD
MH SULSUDYLO WHKQLþQL RGERU (YURSVNHJD NRPLWHMD ]D VWDQGDUGL]DFLMR &(17&  .RQVWUXNFLMVNL
HYURNRGLNDWHUHJDWDMQLãWYRMHYSULVWRMQRVWL%6,
'RSROQLOR6,67(1$MHSULSUDYLOWHKQLþQLRGERU6,677&.21.RQVWUXNFLMH
7RGRSROQLORVHODKNRXSRUDEOMDVNXSDMVVWDQGDUGRP6,67(1R]LURPD(1
NLYSRJODYMX1DFLRQDOQLGRGDWHNQDWDQþQRGRORþDSRJODYMD]DQDFLRQDOQRL]ELUR

1DFLRQDOQDL]ELUDMHY(1GRYROMHQDY
±    ±   
±   3 ±   
±   3 ±  R 
±    ±   3E
±    ±   3
±    ±   3
±    ±   
±    ±   3
±    ±   
±  ±   3
±   3 ±   3
±    ±   
±    ±   
±   3 ± -  

1DFLRQDOQLGRGDWHNYVHEXMHDOWHUQDWLYQHSRVWRSNHYUHGQRVWLLQSULSRURþLOD]DUD]UHGH]RSRPEDPLNL
NDåHMRNMHHYURSVNLVWDQGDUGSUHGYLGHYDGDVHODKNRXYHOMDYLQDFLRQDOQDL]ELUD=DWRGRSROQLOR6,67
(1 $ YVHEXMH QDFLRQDOQR GRORþHQH SDUDPHWUH NL MLK MH WUHED XSRUDELWL SUL
SURMHNWLUDQMXVWDYELQJUDGEHQLKLQåHQLUVNLKREMHNWRY]JUDMHQLKY5HSXEOLNL6ORYHQLML

=9(=$=1$&,21$/1,067$1'$5'20
6,67(1 (YURNRG3URMHNWLUDQMHNRQVWUXNFLMQDSRWUHVQLKREPRþMLK±GHO
0RVWRYL
2320%,
± 3RYVRG NMHU VH Y EHVHGLOX VWDQGDUGD XSRUDEOMD L]UD] ³HYURSVNL VWDQGDUG´ Y
6,67(1$WRSRPHQL³VORYHQVNLVWDQGDUG´
± 1DFLRQDOQLXYRGLQQDFLRQDOQLSUHGJRYRUQLVWDVHVWDYQLGHOVWDQGDUGD



---------------------- Page: 2 ----------------------
6,67(1R$
1DFLRQDOQLGRGDWHNN6,67(1
QRUPDWLYQL 




19VHELQDGRGDWND

  7DQDFLRQDOQLGRGDWHNYVHEXMHSRGDWNHRQDFLRQDOQRGRORþHQLKSDUDPHWULKLQRVWDWXVXGRGDWNRY
NLMLKMHWUHEDSULXSRUDEL6,67(1XSRãWHYDWLY6ORYHQLML

  =DYVDPHVWDNMHUMHGRYROMHQDQDFLRQDOQDL]ELUDVRY6,67(1SRGDQHRSRPEH
VH]QDPWRþNVWHPLRSRPEDPLSDMHSRGDQYQDFLRQDOQHPSUHGJRYRUXN6,67(1

11DFLRQDOQRGRORþHQLSDUDPHWULLQVWDWXVGRGDWNRYNLYHOMDMRY6ORYHQLML

8YRG

2SRPEHN  
,QIRUPDWLYQLGRGDWNL$%&'()+--LQ. 

'RGDWNL$%&'()+--LQ.VRY6ORYHQLMLLQIRUPDWLYQL

2VQRYQH]DKWHYHLQNULWHULML]DL]SROQLWHY]DKWHY

2SRPEDN  3
5HIHUHQþQDSRYUDWQDGRED7.0/�1 SRWUHVQHJDYSOLYD]D]DKWHYRSRQHSRUXãLWYL 

3ULY]DPHVHSULSRURþHQDYUHGQRVW7.0/�1  OHW NDUSUHGVWDYOMDYHUMHWQRVWSUHNRUDþLWYH3.0/�1  
YOHWLK 

2SRPEDN  3
.DWHJRULMHSRPHPEQRVWL]DPRVWRYH 

3ULY]DPHVHSULSRURþHQDUD]GHOLWHYYWULNDWHJRULMHSRPHPEQRVWL

9 VSORãQHP VR PRVWRYL QD DYWRFHVWDK LQ QDFLRQDOQLK FHVWDK WHU åHOH]QLãNL PRVWRYL XYUãþHQL Y
NDWHJRULMR,, SRYSUHþQDSRPHPEQRVW 

9NDWHJRULMR,,,VRXYUãþHQLPRVWRYLNLVRNULWLþQL]DY]GUåHYDQMHNRPXQLNDFLMSRVHEQRYREGREMXWDNRM
SRSRWUHVXPRVWRYLSULNDWHULKELSRUXãLWHYSRY]URþLODYHOLNRãWHYLORåUWHYLQSRPHPEQLPRVWRYL]D
NDWHUHMH]DKWHYDQDåLYOMHQMVNDGREDGDOMãDRGQRUPDOQH

0RVWMHODKNRXYUãþHQYNDWHJRULMR, SRGSRYSUHþQDSRPHPEQRVW þHVWDL]SROQMHQDGYDSRJRMD
± PRVWQLNULWLþHQ]DNRPXQLNDFLMH
± L]ELUD UHIHUHQþQH YHUMHWQRVWL SUHNRUDþLWYH 3.0/�1  SRWUHVQHJD YSOLYD Y  OHWLK DOL VWDQGDUGQH
åLYOMHQMVNHGREHPRVWXOHWQLHNRQRPVNRXSUDYLþHQD
.DWHJRULMHSRPHPEQRVWL,,,LQ,,,SULEOLåQRXVWUH]DMRUD]UHGRPJOHGHQDSRVOHGLFH&&&&LQ&&NL
VRRSUHGHOMHQHY(1%

2SRPEDN  
.DWHJRULMHSRPHPEQRVWL]DPRVWRYH 

3ULY]DPHWDVHSULSRURþHQLYUHGQRVWL]DIDNWRUSRPHPEQRVWL2NL]QDãDWDLQ]DNDWHJRULML
SRPHPEQRVWL,LQ,,,



---------------------- Page: 3 ----------------------
6,67(1$
2SRPEDN  
3RJRML]DXSRãWHYDQMHSRWUHVQHJDYSOLYDNRWQH]JRGQHJDYSOLYD 

3RWUHVQLYSOLYVHODKNRXSRãWHYDNRWQH]JRGQLYSOLY3ULPRVWRYLKNDWHJRULM,LQ,,VH]DKWHYHWRþN
  LQ  RPLOLMR3ULSRWUHVQHPYSOLYXVSRYUDWQRGRER7.0/�1  OHWODKNRSULPRVWRYLK
NDWHJRULM,LQ,,SULGHGRSRãNRGEYR]LãþQHNRQVWUXNFLMHLQQL]DKWHYDQRGDMHQXMHQSURPHWPRJRþWDNRM
SRSRWUHVX3ULPRVWRYLKNDWHJRULMH,,,PRUDMRELWL]DKWHYHWRþO  LQ  L]SROQMHQH

2SRPEDN  
'ROåLQDSODVWLþQLKþOHQNRY 

=D GROåLQR SODVWLþQLK þOHQNRY /3 ]D EHWRQVNH HOHPHQWH VH XSRãWHYD SULSRURþHQ L]UD] SRGDQ Y
GRGDWNX(

2SRPEDN  
'HOHåLSURMHNWQHJDSRPLND]DQHNULWLþQHGHOHNRQVWUXNFLMH 

3ULY]DPHWDVHSULSRURþHQLYUHGQRVWLS4  ]DSURMHNWQLSRWUHVQLSRPLN LQS5  ]DWHPSHUDWXUQL
SRPLN 

2SRPELLQN  
3RHQRVWDYOMHQHSURMHNWQH]DKWHYHYSULPHUXQL]NHVHL]PLþQRVWL 

1L]NDVHL]PLþQRVWMHRSUHGHOMHQDYQDFLRQDOQHPGRGDWNXN6,67(1RSRPEDN  
3URMHNWQLSRVSHãHNQDWOHKWLSD$WRMHYUHGQRVWSRGDQDYYHOMDYQLNDUWLSRWUHVQHQHYDUQRVWL6ORYHQLMH
QLYHþMLRGJ 3RYHOMDYQLNDUWL 3RWUHVQDQHYDUQRVW6ORYHQLMH±3URMHNWQLSRVSHãHNWDO0
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1998-2:2006/A2:2012(Amendment)
Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges
EN 1998-2:2005/A2:2011

(1)   The scope of Eurocode 8 is defined in EN 1998-1:2004, 1.1.1 and the scope of this Standard is defined in 1.1.1. Additional parts of Eurocode 8 are indicated in EN 1998-1:2004, 1.1.3.
(2)   Within the framework of the scope set forth in EN 1998-1:2004, this part of the Standard contains the particular Performance Requirements, Compliance Criteria and Application Rules applicable to the design of earthquake resistant bridges.
(3)   This Part primarily covers the seismic design of bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of cable-stayed and arched bridges, although its provisions should not be considered as fully covering these cases.
(4)   Suspension bridges, timber and masonry bridges, moveable bridges and floating bridges are not included in the scope of this Part.
(5)   This Part contains only those provisions that, in addition to other relevant Eurocodes or relevant Parts of EN 1998, should be observed for the design of bridges in seismic regions. In cases of low seismicity, simplified design criteria may be established (see 2.3.7(1)).
(6)   The following topics are dealt with in the text of this Part:
Basic requirements and Compliance Criteria,
Seismic Action,
Analysis,
Strength Verification,
Detailing.
This Part also includes a special section on seismic isolation with provisions covering the application of this method of seismic protection to bridges.
(7)   Annex G contains rules for the calculation of capacity design effects.
(8)   Annex J contains rules regarding the variation of design properties of seismic isolator units and how such variation may be taken into account in design.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1998-2:2006/AC:2010(Corrigendum)
Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges
EN 1998-2:2005/AC:2010

(1) The scope of Eurocode 8 is defined in EN 1998-1:2004, 1.1.1 and the scope of this Standard is defined in 1.1.1. Additional parts of Eurocode 8 are indicated in EN 1998-1:2004, 1.1.3.
(2) Within the framework of the scope set forth in EN 1998-1:2004, this part of the Standard contains the particular Performance Requirements, Compliance Criteria and Application Rules applicable to the design of earthquake resistant bridges.
(3) This Part primarily covers the seismic design of bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of cable-stayed and arched bridges, although its provisions should not be considered as fully covering these cases.
(4) Suspension bridges, timber and masonry bridges, moveable bridges and floating bridges are not included in the scope of this Part.
(5) This Part contains only those provisions that, in addition to other relevant Eurocodes or relevant Parts of EN 1998, should be observed for the design of bridges in seismic regions. In cases of low seismicity, simplified design criteria may be established (see 2.3.7(1)).
(6) The following topics are dealt with in the text of this Part:  Basic requirements and Compliance Criteria,  Seismic Action,  Analysis,  Strength Verification,  Detailing.
This Part also includes a special section on seismic isolation with provisions covering the application of this method of seismic protection to bridges.
(7) Annex G contains rules for the calculation of capacity design effects.
(8) Annex J contains rules regarding the variation of design properties of seismic isolator units and how such variation may be taken into account in design.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1998-2:2006/A1:2009(Amendment)
Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges
EN 1998-2:2005/A1:2009

(1)   The scope of Eurocode 8 is defined in EN 1998-1:2004, 1.1.1 and the scope of this Standard is defined in 1.1.1. Additional parts of Eurocode 8 are indicated in EN 1998-1:2004, 1.1.3.
(2)   Within the framework of the scope set forth in EN 1998-1:2004, this part of the Standard contains the particular Performance Requirements, Compliance Criteria and Application Rules applicable to the design of earthquake resistant bridges.
(3)   This Part primarily covers the seismic design of bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of cable-stayed and arched bridges, although its provisions should not be considered as fully covering these cases.
(4)   Suspension bridges, timber and masonry bridges, moveable bridges and floating bridges are not included in the scope of this Part.
(5)   This Part contains only those provisions that, in addition to other relevant Eurocodes or relevant Parts of EN 1998, should be observed for the design of bridges in seismic regions. In cases of low seismicity, simplified design criteria may be established (see 2.3.7(1)).
(6)   The following topics are dealt with in the text of this Part:
Basic requirements and Compliance Criteria,
Seismic Action,
Analysis,
Strength Verification,
Detailing.
This Part also includes a special section on seismic isolation with provisions covering the application of this method of seismic protection to bridges.
(7)   Annex G contains rules for the calculation of capacity design effects.
(8)   Annex J contains rules regarding the variation of design properties of seismic isolator units and how such variation may be taken into account in design.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1998-2:2006(Main)
Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges
EN 1998-2:2005

(1)   The scope of Eurocode 8 is defined in EN 1998-1:2004, 1.1.1 and the scope of this Standard is defined in 1.1.1. Additional parts of Eurocode 8 are indicated in EN 1998-1:2004, 1.1.3.
(2)   Within the framework of the scope set forth in EN 1998-1:2004, this part of the Standard contains the particular Performance Requirements, Compliance Criteria and Application Rules applicable to the design of earthquake resistant bridges.
(3)   This Part primarily covers the seismic design of bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of cable-stayed and arched bridges, although its provisions should not be considered as fully covering these cases.
(4)   Suspension bridges, timber and masonry bridges, moveable bridges and floating bridges are not included in the scope of this Part.
(5)   This Part contains only those provisions that, in addition to other relevant Eurocodes or relevant Parts of EN 1998, should be observed for the design of bridges in seismic regions. In cases of low seismicity, simplified design criteria may be established (see 2.3.7(1)).
(6)   The following topics are dealt with in the text of this Part:
Basic requirements and Compliance Criteria,
Seismic Action,
Analysis,
Strength Verification,
Detailing.
This Part also includes a special section on seismic isolation with provisions covering the application of this method of seismic protection to bridges.
(7)   Annex G contains rules for the calculation of capacity design effects.
(8)   Annex J contains rules regarding the variation of design properties of seismic isolator units and how such variation may be taken into account in design.

  • Standard
    146 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 1998-2:2023(Main)
Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges
prEN 1998-2

EN 1998-2 is intended to be applied to the design of new bridges in seismic regions. It covers the design of reinforced concrete, steel and composite steel-concrete bridges and provides guidance for the design of timber bridges.
EN 1998-2 is applicable to the seismic design of bridges exploiting ductility in structural members or through the use of antiseismic devices. When ductility is exploited, this part primarily covers bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of arched bridges, although its provisions should not be considered as fully covering these cases.
Suspension bridges and masonry bridges, moveable bridges and floating bridges are not included in the scope of EN 1998-2.

  • Draft
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1998-2:2006/A2:2012(Amendment)
Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges
EN 1998-2:2005/A2:2011

(1)   The scope of Eurocode 8 is defined in EN 1998-1:2004, 1.1.1 and the scope of this Standard is defined in 1.1.1. Additional parts of Eurocode 8 are indicated in EN 1998-1:2004, 1.1.3.
(2)   Within the framework of the scope set forth in EN 1998-1:2004, this part of the Standard contains the particular Performance Requirements, Compliance Criteria and Application Rules applicable to the design of earthquake resistant bridges.
(3)   This Part primarily covers the seismic design of bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of cable-stayed and arched bridges, although its provisions should not be considered as fully covering these cases.
(4)   Suspension bridges, timber and masonry bridges, moveable bridges and floating bridges are not included in the scope of this Part.
(5)   This Part contains only those provisions that, in addition to other relevant Eurocodes or relevant Parts of EN 1998, should be observed for the design of bridges in seismic regions. In cases of low seismicity, simplified design criteria may be established (see 2.3.7(1)).
(6)   The following topics are dealt with in the text of this Part:
Basic requirements and Compliance Criteria,
Seismic Action,
Analysis,
Strength Verification,
Detailing.
This Part also includes a special section on seismic isolation with provisions covering the application of this method of seismic protection to bridges.
(7)   Annex G contains rules for the calculation of capacity design effects.
(8)   Annex J contains rules regarding the variation of design properties of seismic isolator units and how such variation may be taken into account in design.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1998-2:2006/AC:2010(Corrigendum)
Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges
EN 1998-2:2005/AC:2010

(1) The scope of Eurocode 8 is defined in EN 1998-1:2004, 1.1.1 and the scope of this Standard is defined in 1.1.1. Additional parts of Eurocode 8 are indicated in EN 1998-1:2004, 1.1.3.
(2) Within the framework of the scope set forth in EN 1998-1:2004, this part of the Standard contains the particular Performance Requirements, Compliance Criteria and Application Rules applicable to the design of earthquake resistant bridges.
(3) This Part primarily covers the seismic design of bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of cable-stayed and arched bridges, although its provisions should not be considered as fully covering these cases.
(4) Suspension bridges, timber and masonry bridges, moveable bridges and floating bridges are not included in the scope of this Part.
(5) This Part contains only those provisions that, in addition to other relevant Eurocodes or relevant Parts of EN 1998, should be observed for the design of bridges in seismic regions. In cases of low seismicity, simplified design criteria may be established (see 2.3.7(1)).
(6) The following topics are dealt with in the text of this Part:  Basic requirements and Compliance Criteria,  Seismic Action,  Analysis,  Strength Verification,  Detailing.
This Part also includes a special section on seismic isolation with provisions covering the application of this method of seismic protection to bridges.
(7) Annex G contains rules for the calculation of capacity design effects.
(8) Annex J contains rules regarding the variation of design properties of seismic isolator units and how such variation may be taken into account in design.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1998-2:2006/A1:2009(Amendment)
Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges
EN 1998-2:2005/A1:2009

(1)   The scope of Eurocode 8 is defined in EN 1998-1:2004, 1.1.1 and the scope of this Standard is defined in 1.1.1. Additional parts of Eurocode 8 are indicated in EN 1998-1:2004, 1.1.3.
(2)   Within the framework of the scope set forth in EN 1998-1:2004, this part of the Standard contains the particular Performance Requirements, Compliance Criteria and Application Rules applicable to the design of earthquake resistant bridges.
(3)   This Part primarily covers the seismic design of bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of cable-stayed and arched bridges, although its provisions should not be considered as fully covering these cases.
(4)   Suspension bridges, timber and masonry bridges, moveable bridges and floating bridges are not included in the scope of this Part.
(5)   This Part contains only those provisions that, in addition to other relevant Eurocodes or relevant Parts of EN 1998, should be observed for the design of bridges in seismic regions. In cases of low seismicity, simplified design criteria may be established (see 2.3.7(1)).
(6)   The following topics are dealt with in the text of this Part:
Basic requirements and Compliance Criteria,
Seismic Action,
Analysis,
Strength Verification,
Detailing.
This Part also includes a special section on seismic isolation with provisions covering the application of this method of seismic protection to bridges.
(7)   Annex G contains rules for the calculation of capacity design effects.
(8)   Annex J contains rules regarding the variation of design properties of seismic isolator units and how such variation may be taken into account in design.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1998-2:2006(Main)
Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges
EN 1998-2:2005

(1)   The scope of Eurocode 8 is defined in EN 1998-1:2004, 1.1.1 and the scope of this Standard is defined in 1.1.1. Additional parts of Eurocode 8 are indicated in EN 1998-1:2004, 1.1.3.
(2)   Within the framework of the scope set forth in EN 1998-1:2004, this part of the Standard contains the particular Performance Requirements, Compliance Criteria and Application Rules applicable to the design of earthquake resistant bridges.
(3)   This Part primarily covers the seismic design of bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of cable-stayed and arched bridges, although its provisions should not be considered as fully covering these cases.
(4)   Suspension bridges, timber and masonry bridges, moveable bridges and floating bridges are not included in the scope of this Part.
(5)   This Part contains only those provisions that, in addition to other relevant Eurocodes or relevant Parts of EN 1998, should be observed for the design of bridges in seismic regions. In cases of low seismicity, simplified design criteria may be established (see 2.3.7(1)).
(6)   The following topics are dealt with in the text of this Part:
Basic requirements and Compliance Criteria,
Seismic Action,
Analysis,
Strength Verification,
Detailing.
This Part also includes a special section on seismic isolation with provisions covering the application of this method of seismic protection to bridges.
(7)   Annex G contains rules for the calculation of capacity design effects.
(8)   Annex J contains rules regarding the variation of design properties of seismic isolator units and how such variation may be taken into account in design.

  • Standard
    146 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 1998-2:2023(Main)
Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges
prEN 1998-2

EN 1998-2 is intended to be applied to the design of new bridges in seismic regions. It covers the design of reinforced concrete, steel and composite steel-concrete bridges and provides guidance for the design of timber bridges.
EN 1998-2 is applicable to the seismic design of bridges exploiting ductility in structural members or through the use of antiseismic devices. When ductility is exploited, this part primarily covers bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of arched bridges, although its provisions should not be considered as fully covering these cases.
Suspension bridges and masonry bridges, moveable bridges and floating bridges are not included in the scope of EN 1998-2.

  • Draft
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day