iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TP CLC/TR 50579:2012

(Main)

Electricity metering equipment - Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 -150 kHz

Electricity metering equipment - Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 -150 kHz

This European Technical Report applies to newly manufactured static watt-hour meters intended for residential, commercial and light industrial use, of class indexes A, B and C, for the measurement of alternating current electrical active energy in 50 Hz networks. It specifies particular requirements and immunity test for direct connected and transformer connected electricity meters as an extension for EN 50470-1 and EN 50470-3. The tests are designed to achieve immunity against disturbing currents of up to 2 A (2 kHz-30 kHz) and up to 1 A (30 KHz-150 kHz) for direct connected meters and 2 % Imax (2 kHz-30 kHz) and 1 % Imax (30 KHz-150 kHz) for transformer connected meters.

Wechselstrom-Elektrizitätszähler - Prüfschärfe, Störfestigkeit und Prüfverfahren für leitungsgeführte Störgrößen im Frequenzbereich von 2 kHz bis 150 kHz

Equipement de comptage d'électricité (c.a.) – Niveaux de sévérité, prescriptions d’immunité et méthodes d’essai pour les perturbations conduites dans le domaine de fréquence de 2 kHz à 150 kHz

Oprema za merjenje električne energije - Težavnostni nivoji, zahteve za odpornost in preskusne metode za motnje po vodnikih v frekvenčnem območju 2-150 kHz

To evropsko tehnično poročilo se uporablja za nove statične števce električne energije z razrednimi indeksi A, B in C, ki so namenjeni za uporabo v stanovanjskih, poslovnih in manj zahtevnih industrijskih okoljih, za merjenje električne delovne energije izmeničnega toka v omrežjih na 50 Hz. Določa posebne zahteve in preskus odpornosti za števce električne energije za direktno priključitev in priključitev prek transformatorja kot razširitev standardov EN 50470-1 in EN 50470-3. Preskusi so zasnovani tako, da se doseže odpornost na moteče tokove do 2 A (2 kHz–30 kHz) in do 1 A (30 KHz–150 kHz) pri direktno priključenih števcih ter 2 % Imax (2 kHz–30 kHz) in 1 % Imax (30 KHz–150 kHz) pri števcih, priključenih prek transformatorja.

General Information

Status
Published
Publication Date
09-Jul-2012
ICS
17.220.20 - Measurement of electrical and magnetic quantities
Technical Committee
MEE - Equipment for electrical energy measurement and load control
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Jul-2012
Due Date
07-Sep-2012
Completion Date
10-Jul-2012
Ref Project
CLC/TR 50579:2012 - Electricity metering equipment (a.c.) - Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz - 150 kHz

Buy Standard

TP CLC/TR 50579:2012TP CLC/TR 50579:2012
PreviousNext
Technical report
TP CLC/TR 50579:2012
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CLC/TR 50579:2012
01-september-2012
2SUHPD]DPHUMHQMHHOHNWULþQHHQHUJLMH7HåDYQRVWQLQLYRML]DKWHYH]DRGSRUQRVW
LQSUHVNXVQHPHWRGH]DPRWQMHSRYRGQLNLKYIUHNYHQþQHPREPRþMXN+]
Electricity metering equipment - Severity levels, immunity requirements and test methods
for conducted disturbances in the frequency range 2 -150 kHz
Wechselstrom-Elektrizitätszähler - Prüfschärfe, Störfestigkeit und Prüfverfahren für
leitungsgeführte Störgrößen im Frequenzbereich von 2 kHz bis 150 kHz
Equipement de comptage d'électricité (c.a.) – Niveaux de sévérité, prescriptions
d’immunité et méthodes d’essai pour les perturbations conduites dans le domaine de
fréquence de 2 kHz à 150 kHz
Ta slovenski standard je istoveten z: CLC/TR 50579:2012
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
SIST-TP CLC/TR 50579:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CLC/TR 50579:2012

---------------------- Page: 2 ----------------------

SIST-TP CLC/TR 50579:2012

TECHNICAL REPORT
CLC/TR 50579

RAPPORT TECHNIQUE
June 2012
TECHNISCHER BERICHT

ICS 91.140.50


English version


Electricity metering equipment (a.c.) -
Severity levels, immunity requirements and test methods for conducted
disturbances in the frequency range 2 kHz -
150 kHz



Equipement de comptage d'électricité Wechselstrom-Elektrizitätszähler -
(c.a.) – Niveaux de sévérité, prescriptions Prüfschärfe, Störfestigkeit und
d’immunité et méthodes d’essai pour les Prüfverfahren für leitungsgeführte
perturbations conduites dans le domaine Störgrößen im Frequenzbereich von 2 kHz
de fréquence de 2 kHz à 150 kHz bis 150 kHz








This Technical Report was approved by CENELEC on 2012-06-04.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.





CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. CLC/TR 50579:2012 E

---------------------- Page: 3 ----------------------

SIST-TP CLC/TR 50579:2012
CLC/TR 50579:2012 - 2 -
Contents Page
Foreword . - 3 -
Introduction. - 4 -
1 Sc op e . - 5 -
2 Normative references . - 5 -
3 Terms and definitions . - 5 -
4 General . - 6 -
5 Test equipment . - 7 -
5.1 Test generator for the disturbing current . - 7 -
5.1.1 General . - 7 -
5.1.2 Example of a test generator for the disturbing current . - 7 -
5.2 Generator for 50 Hz current and voltage . - 8 -
5.2.1 General . - 8 -
5.2.2 Example for a testing circuit . - 9 -
6 Test sequence . - 9 -
7 Performance criteria  Performance criteria for electricity meter as described in
EN 50470-1 and EN 50470-3 . - 10 -
Annex A (informative)  Example for a realised test set-up  Setup schematic . - 11 -
Bibliography . - 12 -

---------------------- Page: 4 ----------------------

SIST-TP CLC/TR 50579:2012
- 3 - CLC/TR 50579:2012
Foreword
This document (CLC/TR 50579:2012) has been prepared by CLC/TC 13 "Equipment for electrical
energy measurement and load control".
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

---------------------- Page: 5 ----------------------

SIST-TP CLC/TR 50579:2012
CLC/TR 50579:2012 - 4 -
Introduction
This Technical Report specifies immunity levels and standard testing procedure for the immunity
against symmetric currents in the frequency range from 2 kHz to 150 kHz as an extension of the
harmonised standards EN 50470-1 and EN 50470-3 until the basic standards IEC 61000-x-x are in
force.
This Technical Report was requested by various approval bodies and utilities as a temporary solution,
since accuracy problems with electricity meters were observed in presence of disturbing currents in
the frequency range from 2 kHz to 150 kHz. Up to date no standards are available for this frequency
range.
The testing against symmetrical currents is not yet a part of the actual basic standards or product
standards in EMC. However for some electricity meters an influence of symmetric currents has been
shown in various investigations. The source of these currents in a frequency range from 2 kHz to
150 kHz can be a photovoltaic inverter or other switched mode power supplies.

---------------------- Page: 6 ----------------------

SIST-TP CLC/TR 50579:2012
- 5 - CLC/TR 50579:2012
1 Scope
This European Technical Report applies to newly manufactured static watt-hour meters intended for
residential, commercial and light industrial use, of class indexes A, B and C, for the measurement of
alternating current electrical active energy in 50 Hz networks. It specifies particular requirements and
immunity test for direct connected and transformer connected electricity meters as an extension for
EN 50470-1 and EN 50470-3. The tests are designed to achieve immunity against disturbing currents
of up to 2 A (2 kHz-30 kHz) and up to 1 A (30 KHz-150 kHz) for direct connected meters and 2 % Imax
(2 kHz-30 kHz) and 1 % Imax (30 KHz-150 kHz) for transformer connected meters.
It applies to static watt-hour meters for indoor and outdoor application, consisting of a measuring
element and register(s) enclosed together in a meter case.
If the meter has (a) measuring element(s) for more than one type of energy (multi-energy meters), or
when other functional elements, like maximum demand indicators, electronic tariff registers, time
switches, ripple control receivers, data communication interfaces etc. are enclosed in the meter case
(multi-function meters) then this Technical Report applies only for the active energy metering part.
This Technical Report distinguishes between:
– meters of class indexes A, B and C;
– direct connected and transformer operated meters;
It does not apply to:
– watt-hour meters where the voltage across the connection terminals exceeds 600 V (line-to-
line voltage for meters for polyphase systems);
– portable meters;
– reference meters.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 50470-1, Electricity metering equipment (a.c.)  Part 1: General requirements, tests and test
conditions  Metering equipment (class indexes A, B and C)
EN 50470-3:2006, Electricity metering equipment (a.c.)  Part 3: Particular requirements  Static
meters for active energy (class indexes A, B and C)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
equipment under test
(EUT)
electricity meter or other instrumentation for the measurement of energy which is tested against the
disturbing current described in this Technical Report

---------------------- Page: 7 ----------------------

SIST-TP CLC/TR 50579:2012
CLC/TR 50579:2012 - 6 -
3.2
load current
I
50Hz
50 Hz current flowing through the current path of the equipment under test. Typically the current is
flowing through the live wires LIN to LOUT of the electricity meter
3.3
disturbi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62057-1:2023(Main)
Electrical energy meters - Test equipment, techniques and procedures - Part 1: Stationary meter test units (MTUs) (IEC 62057-1:2023)
EN IEC 62057-1:2023

IEC 62057-1:2023 applies to stationary meter test units (MTUs) permanently installed in laboratories, used for testing and calibration of electricity meters, in particular for their type test, acceptance test and verification test. It covers the requirements for automatic MTUs for indoor laboratory application and applies to newly manufactured MTUs to test electricity meters on 50 Hz or 60 Hz networks with an AC voltage up to 600 V (phase to neutral).
If meters are intended for system voltages not specified in this document, special requirements are agreed between the manufacturer and the purchaser.
This document also defines the kind of tests to perform as type tests / routine tests / acceptance tests and commissioning tests for MTUs.
It does not apply to:
• portable reference meters and portable sources;
• electricity meters;
• data interfaces to the meter and test procedures of data interface;
• transformer operated MTUs;
• personal computers supplied together with the MTU.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62052-41:2023(Main)
Electricity metering equipment - General requirements, tests and test conditions - Part 41: Energy registration methods and requirements for multi-energy and multi-rate meters (IEC 62052-41:2022)
EN IEC 62052-41:2022

IEC 62052-41:2022 applies only to newly manufactured multi-energy and/or multi-rate static meters and it applies to their type tests only.
This document applies to electricity metering equipment designed to:
• measure and control electrical energy on networks with voltage up to 1 000 V AC, or 1 500 V DC;
• have all functional elements, including add-on modules, enclosed in, or forming a single meter case with exception of indicating displays;
• operate with integrated displays;
• operate with detached indicating displays, or without an indicating display;
• be installed in a specified matching socket or rack;
• optionally, provide additional functions other than those for measurement of electrical energy.
Meters designed for operation with Low Power Instrument Transformers (LPITs as defined in the IEC 61869 series) may be tested for compliance with this document and the relevant IEC 62053 series documents only if such meters and their LPITs are tested together as directly connected meters.
This document does not apply to:
• meters for which the voltage line-to-neutral derived from nominal voltages exceeds 1 000 V AC, or 1 500 V DC;
• meters intended for connection with low power instrument transformers (LPITs as defined in the IEC 61869 series of standards) when tested without such transformers;
• metering systems comprising multiple devices (except for LPITs) physically remote from one another;
• portable meters;
• meters used in rolling stock, vehicles, ships and airplanes;
• laboratory and meter test equipment;
• reference standard meters;
• data interfaces to the register of the meter;
• matching sockets or racks used for installation of electricity metering equipment.
This document does not cover measures for the detection and prevention of fraudulent attempts to compromise a meter’s performance (tampering).

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62055-42:2022(Main)
Electricity metering - Payment systems - Part 42: Transaction Reference Numbers (TRN)
EN IEC 62055-42:2022

This document specifies a token generation mechanism and token structure for smart
prepayment functionality in markets where IEC 62055-41 compliant systems are not used, and
where a different security mechanism is required by project-specific or national requirements.
This document specifies token structure, authentication and an anti-replay mechanism, token
operating model, and protocol.
This document is informed by the STS Association key management services, and by the key
management mechanisms used within the DLMS/COSEM security model within IEC 62056‑6‑2.
Reference is made to the international STS token standards (IEC 62055-41, IEC 62055-51 and
IEC 62055-52) for payment metering systems, and interworking has been considered where
appropriate in terms of token carrier ranges in the decimal domain. IEC 62055-41 tokens and
those described in this document are not interoperable, however their domains are designed to
be mutually exclusive to ensure the two kinds of tokens do not interfere with each other.
Metering application processing and functionality, HAN interface commands and attributes,
WAN interface commands and attributes are outside the scope of this document; however,
reference is made to other standards in this regard.
The mechanism for auditing and retrieving data from the meter relating to tariffication, meter
readings, profile data and other legal metrology information is outside the scope of this
document; however, this is defined as part of any overall metering solution. Such interfaces for
retrieving data from a meter may be defined using suitable protocols such as DLMS/COSEM as
defined in the IEC 62056 series.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62055-31:2022(Main)
Electricity metering - Payment systems - Part 31: Particular requirements - Static payment meters for active energy (classes 0,5, 1 and 2)
EN IEC 62055-31:2022

This part of IEC 62055 applies to newly manufactured, static watt-hour payment meters of
accuracy classes 0,5, 1 and 2 for direct connection, for the measurement of alternating current
electrical energy consumption of a frequency in the range 45 Hz to 65 Hz that include a supply
control switch for the purpose of interruption or restoration of the electricity supply to the load
in accordance with the current value of the available credit maintained in the payment meter. It
does not apply to static watt-hour payment meters where the voltage across the connection
terminals exceeds 1 000 V (line-to-line voltage for meters for polyphase systems).
It applies to payment meters for indoor application, operating under normal climatic conditions
where the payment meter is mounted as for normal service (i.e. together with a specified
matching socket where applicable).
Payment meters are implementations where all the main functional elements are incorporated
in a single enclosure, together with any specified matching socket. There are also multi-device
payment metering installations where the various main functional elements, such as the
measuring element, the user interface unit, token carrier interface, and the supply control switch
are implemented in more than one enclosure, involving additional interfaces.
Functional requirements that apply to payment meters are also defined in this document, and
include informative basic functional requirements and tests for the prepayment mode of
operation in Annex A. Allowances are made for the relatively wide range of features, options,
alternatives, and implementations that may be found in practice. The diverse nature and
functionality of payment meters prevent the comprehensive specification of detailed test
methods for all of these requirements. However, in this case, the requirements are stated in
such a way that tests can then be formulated to respect and validate the specific functionality
of the payment meter being tested.
This document does not cover specific functionality or performance requirements for circuit
protection, isolation or similar purposes that may be specified through reference to other
specifications or standards. Safety requirements removed from Edition 1.0 have been replaced
with references to the safety requirements now contained in IEC 62052-31:2015, the product
safety standard for newly manufactured electricity meters. In-service safety testing (ISST) is
not covered by IEC 62052-31:2015 and is left to national best practice usually as an extension
of existing in-service testing (IST) of metrology stability.
This document does not cover software requirements. This document covers type-testing
requirements only. For acceptance testing, the requirements given in IEC 62058‑11:2008 and
IEC 62058-31:2008 may be used.
Dependability aspects are addressed in the IEC 62059 series of standards. Additional reliability,
availability, maintenance and life cycle aspects are provided by IEC TC 56.
This document does not cover conformity tests and system compliance tests that may be
required in connection with legal or other requirements of some markets

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50470-3:2022(Main)
Electricity metering equipment - Part 3: Particular requirements - Static meters for AC active energy (class indexes A, B and C)
EN 50470-3:2022

This document applies only to static watt-hour meters of accuracy classes A, B and C for the measurement of
alternating current electrical active energy in 50 Hz or 60 Hz networks and it applies to their type tests.
NOTE 1 For general requirements, such as construction, EMC, safety, dependability etc., see the relevant EN 62052
series or EN 62059 series.
This document applies to electricity metering equipment designed to:
— measure and control electrical energy on electrical networks (mains) with voltage up to 1 000 V AC;
NOTE 2 For AC electricity meters, the voltage mentioned above is the line-to-neutral voltage derived from nominal
voltages. See EN 62052-31:2016, Table 7. EN 62052-31:2016 covers AC voltages only up to 600 V and Ed. 2 of
EN IEC 62052-31 will cover AC voltages up to 1000 V.
— have all functional elements, including add-on modules, enclosed in, or forming a single meter case with
exception of indicating displays;
— operate with integrated or detached indicating displays;
— be installed in specified matching sockets or racks;
— optionally, provide additional functions other than those for measurement of electrical energy.
Meters designed for operation with low power instrument transformers (LPITs as defined in the EN 61869
series) can be tested for compliance with this document only if such meters and their LPITs are tested together
and meet the requirements for directly connected meters.
NOTE 3 Modern electricity meters typically contain additional functions such as measurement of voltage magnitude,
current magnitude, power, frequency, power factor, etc.; measurement of power quality parameters; load control functions;
delivery, time, test, accounting, recording functions; data communication interfaces and associated data security functions.
The relevant standards for these functions could apply in addition to the requirements of this document. However, the
requirements for such functions are outside the scope of this document.
NOTE 4 Product requirements for power metering and monitoring devices (PMDs) and measurement functions such as
voltage magnitude, current magnitude, power, frequency, etc., are covered in EN 61557-12:2008. However, devices
compliant with EN 61557-12:2008 are not intended to be used as billing meters unless they are also compliant with the
EN IEC 62052-11:2021/A11:2022 and EN 50470-3:2022 standards.
NOTE 5 Product requirements for power quality instruments (PQIs) are covered in EN 62586-1:2017. Requirements for
power quality measurement techniques (functions) are covered in EN 61000-4-30:2015. Requirements for testing of the
power quality measurement functions are covered in EN 62586-2:2017.
This document does not apply to:
— meters for which the line-to-neutral voltage derived from nominal voltages exceeds 1 000 V AC;
— meters intended for connection with low power instrument transformers (LPITs as defined in the EN 61869
series) when tested without such transformers;
— metering systems comprising multiple devices (except of LPITs) physically remote from one another;
— portable meters;
NOTE 6 Portable meters are meters that are not permanently connected.
— meters used in rolling stock, vehicles, ships and airplanes;
— laboratory and meter test equipment;
reference standard meters;
— data interfaces to the register of the meter;
— matching sockets or racks used for installation of electricity metering equipment;
— any additional functions provided in electrical energy meters.
This document does not cover measures for the detection and prevention of fraudulent attempts to compromise
meter’s performance (tampering).
NOTE 7 Nevertheless, specific tampering detection and prevention requirements, and test methods, as relevant for a
particular market are subject to the agreement between the manufacturer and the purchaser.
NOTE 8 Specifying requirements and test methods for fraud detection and prevention would be counterproductive, a

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62052-11:2021/A11:2022(Amendment)
Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment
EN IEC 62052-11:2021/A11:2022

This part of IEC 62052 specifies requirements and associated tests, with their appropriate conditions for type testing of AC and DC electricity meters. This document details functional, mechanical, electrical and marking requirements, test methods, and test conditions, including immunity to external influences covering electromagnetic and climatic environments.

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62056-3-1:2021(Main)
Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling
EN IEC 62056-3-1:2021

This part of IEC 62056 describes two sets of profiles: the first set of profiles allows a
bidirectional communication between a client and a server. This set of profiles is made of three
profiles allowing local bus data exchange with stations either energized or not. For nonenergized
stations, the bus supplies energy for data exchange. Three different profiles are
supported:
• base profile: this three-layer profile provides remote communication services;
NOTE 1 This first profile was published in IEC 61142:1993 and became known as the Euridis standard.
• profile with DLMS: this profile allows using DLMS services as specified in IEC 61334-4-41;
NOTE 2 This second profile was published in IEC 62056-31:1999.
• profile with DLMS/COSEM: this profile allows using the DLMS/COSEM Application layer and
the COSEM object model as specified in IEC 62056-5-3 and in IEC 62056-6-2 respectively.
The three profiles use the same physical layer and they are fully compatible, meaning that
devices implementing any of these profiles can be operated on the same bus. The transmission
medium is twisted pair using carrier signalling and it is known as the Euridis Bus.
The second set of profiles allows unidirectional communication between a given Energy
Metering device and a Customer Energy Management System. This second set is made up of
three profiles.
Subclause 4.2.1 to Clause 8 included specify the bidirectional communication using twisted pair
signalling and Clause 9 to 9.5 the unidirectional communication using twisted pair signalling.

  • Standard
    129 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62053-24:2021/A11:2021(Amendment)
Electricity metering equipment - Particular requirements - Part 24: Static meters for fundamental component reactive energy (classes 0,5S, 1S, 1, 2 and 3)
EN IEC 62053-24:2021/A11:2021

This part of IEC 62053 applies only to static var-hour meters of accuracy classes 0,5S, 1S, 1, 2 and 3 for the measurement of alternating current electrical reactive energy in 50 Hz or 60 Hz networks and it applies to their type tests only.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62053-22:2021/A11:2021(Amendment)
Electricity metering equipment - Particular requirements - Part 22: Static meters for AC active energy (classes 0,1S, 0,2S and 0,5S)
EN IEC 62053-22:2021/A11:2021

This part of IEC 62053 applies only to transformer operated static watt-hour meters of accuracy classes 0,1S, 0,2S and 0,5S for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz networks and it applies to their type tests only.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62053-23:2021/A11:2021(Amendment)
Electricity metering equipment - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)
EN IEC 62053-23:2021/A11:2021

This part of IEC 62053 applies only to static var-hour meters of accuracy classes 2 and 3 for the measurement of alternating current electrical reactive energy in 50 Hz or 60 Hz networks and it applies to their type tests only.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day