SIST EN 13938-3:2003
(Main)Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration to detonation transition
Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration to detonation transition
This European Standard specifies a method to determine the tendency of a propellant to undergo transition from deflagration to detonation. It applies to propellants of a grain size up to 8 mm. This method does not apply to black powder.
Explosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 3: Bestimmung des Überganges der Deflagration in die Detonation
Explosifs a usage civil - Poudre propulsive et propergol - Partie 3: Méthode de détermination du passage de la déflagration a la détonation
La présente Norme européenne décrit une méthode permettant de déterminer la tendance d'une poudre propulsive a passer de la déflagration a la détonation. Elle s'applique aux poudres propulsives dont les grains peuvent atteindre jusqu'a 8 mm. Cette méthode ne s'applique pas a la poudre noire.
Eksplozivi za civilno uporabo - Smodniki in raketna goriva - 3. del: Določevanje prehoda deflagracije v detonacijo
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration to detonation transitionExplosifs a usage civil - Poudre propulsive et propergol - Partie 3: Méthode de détermination du passage de la déflagration a la détonationExplosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 3: Bestimmung des Überganges der Deflagration in die DetonationTa slovenski standard je istoveten z:EN 13938-3:2003SIST EN 13938-3:2003en71.100.30ICS:SLOVENSKI
STANDARDSIST EN 13938-3:200301-maj-2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13938-3March 2003ICS 71.100.30English versionExplosives for civil uses - Propellants and rocket propellants -Part 3: Determination of deflagration to detonation transitionExplosifs à usage civil - Poudre propulsive et propergol -Partie 3: Méthode de détermination du passage de ladéflagration à la détonationExplosivstoffe für zivile Zwecke - Treibladungspulver undRaketentreibstoffe - Teil 3: Bestimmung des Übergangesder Deflagration in die DetonationThis European Standard was approved by CEN on 28 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13938-3:2003 E
EN 13938-3:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Apparatus.45Test sample.66Preparation of test sample.67Procedure.68Test report.7Annex A (informative)
Range of applicability of the test method.8Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.9
EN 13938-3:2003 (E)3ForewordThis document (EN 13938-3:2003) has been prepared by Technical Committee CEN /TC 321 "Explosives for civiluses", the secretariat of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at thelatest by September 2003.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For the relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.This European Standard is one of a series of standards on Explosives for civil uses – Propellants and rocketpropellants. The other parts of this series are listed below:WI 00321046Part 1: Requirements.WI 00321050Part 2: Determination of resistance to electrostatic energy.prEN 13938-4Part 4: Determination of burning rate under ambient conditions.prEN 13938-5Part 5: Solid rocket propellants. Guide for the determination of voids and fissures.prEN 13938-6Part 6: Solid rocket propellants. Guide for the determination of integrity of inhibitor coatings.prEN 13938-7Part 7: Determination of the properties of black powder.Annex A is informative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
EN 13938-3:2003 (E)41 ScopeThis European Standard specifies a method to determine the tendency of a propellant to undergo transition fromdeflagration to detonation. I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.