SIST EN 45510-2-2:2000
(Main)Guide for procurement of power station equipment -- Part 2-2: Electrical equipment - Uninterruptible power supplies
Guide for procurement of power station equipment -- Part 2-2: Electrical equipment - Uninterruptible power supplies
This standard gives guidance on writing the technical specification for the procurement of static a.c. uninterruptible power supplies (UPS's) for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.
Leitfaden für die Beschaffung von Ausrüstung für Kraftwerke -- Teil 2-2: Elektrische Ausrüstung - Unterbrechungsfreie Stromversorgungen
Die vorliegende Norm ist eine Anleitung zur Erstellung der technischen Spezifikation für die Beschaffung von statischen Unterbrechungsfreien Stromversorgungen (USV) für den Einsatz in Anlagen zur Erzeugung von elektrischer Energie (Kraftwerke). Dieser Leitfaden ist nicht anwendbar auf Ausrüstung zur Verwendung im Nuklearbereich von Kernkraftwerken. Bei der Erstellung des Leitfadens wurden keine weiteren Möglichkeiten zur Anwendung der beschriebenen Ausrüstung in Betracht gezogen.
Guide pour l'acquisition d'équipements destinés aux centrales de production d'électricité -- Partie 2-2: Equipements électriques - Alimentations sans interruption
La présente norme donne des recommandations pour la rédaction de la spécification technique nécessaire à l'acquisition de systèmes d'alimentation électrique en courant alternatif sans interruption (ASI) pour les centrales de production d'électricité. Ce guide d'achat n'est pas applicable à ce type d'équipement lorsque celui-ci est destiné à l'ilôt nucléaire des centrales nucléaires. D'autres applications possibles de ce type d'équipement n'ont pas été prises en considération dans la préparation de ce guide.
Guide for procurement of power station equipment - Part 2-2: Electrical equipment - Uninterupptible power supplies
General Information
Overview
EN 45510-2-2:1999 (CLC) is a procurement guide for static a.c. uninterruptible power supplies (UPS) intended for use in electricity generating stations (power stations). The standard provides guidance on preparing the technical specification when procuring UPS equipment for power-station electrical systems. It is explicitly not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations, and other applications were not considered in its preparation.
Key topics
This guide helps specification writers and procurement teams define the technical, operational and contractual aspects of UPS supply without prescribing numerical thresholds. Typical technical topics and requirements addressed include:
- Scope and purpose of the UPS within power-station environments
- Performance and functional requirements (e.g., static a.c. UPS operation, transfer behavior, continuity of supply)
- Electrical characteristics such as ratings, voltage classes and compatibility with station power systems
- Environmental and mechanical conditions - site ambient, enclosure, vibration and ingress protection considerations
- Protection, monitoring and control interfaces for integration with station SCADA and protection systems
- Testing, factory and site acceptance - guidance on specifying inspections, factory tests and on-site commissioning checks
- Documentation and marking - technical manuals, drawings, maintenance instructions and spare parts lists
- Maintenance, reliability and availability considerations relevant to continuous operation in generating stations
- Quality assurance, warranties and contractual obligations for suppliers and purchasers
Note: The standard is a guide on how to write specifications; it does not itself set measured performance limits.
Applications
EN 45510-2-2 is practical for:
- Power station engineering teams preparing tender documents for UPS supply
- Procurement professionals writing technical specifications for static a.c. UPS systems
- Electrical engineers responsible for station auxiliary power, backup supply and critical loads
- System integrators and suppliers responding to power-plant tenders
The guide helps ensure UPS solutions meet the operational, environmental and integration needs specific to electricity generating stations.
Related standards
This procurement guide is normally used alongside other EN/IEC standards for UPS, electrical equipment and power system safety, and with station-specific engineering specifications. When preparing tenders, users usually reference applicable electrical and safety standards to define detailed performance and test criteria.
Keywords: EN 45510-2-2, uninterruptible power supplies, static a.c. UPS, power station procurement, UPS specification, CLC.
Frequently Asked Questions
SIST EN 45510-2-2:2000 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Guide for procurement of power station equipment -- Part 2-2: Electrical equipment - Uninterruptible power supplies". This standard covers: This standard gives guidance on writing the technical specification for the procurement of static a.c. uninterruptible power supplies (UPS's) for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.
This standard gives guidance on writing the technical specification for the procurement of static a.c. uninterruptible power supplies (UPS's) for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.
SIST EN 45510-2-2:2000 is classified under the following ICS (International Classification for Standards) categories: 27.100 - Power stations in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 45510-2-2:2000 is associated with the following European legislation: EU Directives/Regulations: 93/38/EEC; Standardization Mandates: BC/CLC/92-04/1, M/BC/CEN/92/10. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 45510-2-2:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Guide for procurement of power station equipment - Part 2-2: Electrical equipment - Uninterupptible power suppliesLeitfaden für die Beschaffung von Ausrüstung für Kraftwerke -- Teil 2-2: Elektrische Ausrüstung - Unterbrechungsfreie StromversorgungenGuide pour l'acquisition d'équipements destinés aux centrales de production d'électricité -- Partie 2-2: Equipements électriques - Alimentations sans interruptionGuide for procurement of power station equipment -- Part 2-2: Electrical equipment - Uninterruptible power supplies27.100Elektrarne na splošnoPower stations in generalICS:Ta slovenski standard je istoveten z:EN 45510-2-2:1999SIST EN 45510-2-2:2000en01-junij-2000SIST EN 45510-2-2:2000SLOVENSKI
STANDARD
S
...
The article discusses a standard called SIST EN 45510-2-2:2000, which provides guidance on how to write technical specifications for purchasing uninterruptible power supplies (UPS) for power stations. The standard specifically applies to static a.c. UPS and excludes equipment for nuclear power stations. It also mentions that other potential uses of this equipment were not taken into consideration during the development of the guide.
기사 제목: SIST EN 45510-2-2:2000 - 발전소 장비 구매를 위한 가이드 -- 제2-2부: 전기 장비 - 무정전 전원 공급장치 기사 내용: 이 표준은 전기 발전소(발전소)에서 사용하기 위한 정정류된 교류 무정전 전원 공급장치(UPS)의 구매 기술 사양 작성에 대한 지침을 제공합니다. 이 구매를 위한 가이드는 핵 발전소의 원자로 공간에 사용되는 장비에는 적용되지 않습니다. 이 가이드의 작성 과정에서 이러한 장비의 다른 가능한 응용에 대해서는 고려되지 않았습니다.
記事タイトル：SIST EN 45510-2-2:2000 - 発電所設備の調達ガイド―第2-2部：電気設備-無停電電源装置 記事内容：この規格は、発電所で使用するための静止式交流無停電電源装置（UPS）の調達のための技術仕様の作成に関するガイダンスを提供します。この調達ガイドは、原子力発電所の原子炉施設エリアで使用する装置には適用されません。このガイドの作成において、このような装置の他の潜在的な利用については考慮されていません。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...