SIST EN 1124-2:2009

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; dimensions

This standard applies to pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems.  
It specifies dimensions and tolerances for pipes, fittings and pipe connectors and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements.  
This European Standard is only valid in connection with EN 1124-1. It does not apply to the marking of products. EN 1124-1/A1 applies to the marking.

Rohre und Formstücke aus längsnahtgeschweißtem, nichtrostendem Stahlrohr, mit Steckmuffe für Abwasserleitungen - Teil 2: System S; Maße

Diese Norm gilt für Rohre und Formstücke aus längsnahtgeschweißtem, nichtrostendem Stahlrohr mit Steck¬muffe für Abwasserleitungen.
Sie legt Maße und Grenzabmaße für Rohre, Formstücke und Rohrverbindungen fest und enthält zur ein¬fachen Identifizierung jedes Bauteils ein System für die Bezeichnung der verschiedenen Arten von Rohren und Formstücken, die mit den getroffenen Anforderungen übereinstimmen.
Diese Europäische Norm gilt nur in Verbindung mit EN 1124 1. Sie gilt nicht für die Kennzeichnung der Produkte. Hierfür gilt EN 1124 1/A1.

Tubes et raccords de tube soudés longitudinalement en acier inoxydable, a manchon enfichable pour réseaux d'assainissement - Partie 2: Systeme S; Dimensions

Vzdolžno varjene nerjavne jeklene cevi in spojniki z obojko za sisteme za odpadno vodo - 2. del: Sistem S - Mere

General Information

• Status: Withdrawn
• Publication Date: 20-Nov-2008
• Withdrawal Date: 02-Sep-2014
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 93.030 - External sewage systems
• Technical Committee: IOVO - Water supply and waste water engineering
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 03-Sep-2014
• Due Date: 26-Sep-2014
• Completion Date: 03-Sep-2014
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 1124-2:2007 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; dimensions

Relations

• Replaced By: SIST EN 1124-2:2014 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
• Effective Date: 01-Oct-2014
• Replaces: SIST EN 1124-2:2000 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; Dimensions
• Effective Date: 01-Jan-2009
• Replaced By: SIST EN 1124-2:2014 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vzdolžno varjene nerjavne jeklene cevi in spojniki z obojko za sisteme za odpadno vodo - 2. del: Sistem S - MereRohre und Formstücke aus längsnahtgeschweißtem, nichtrostendem Stahlrohr, mit Steckmuffe für Abwasserleitungen - Teil 2: System S; MaßeTubes et raccords de tube soudés longitudinalement en acier inoxydable, a manchon enfichable pour réseaux d'assainissement - Partie 2: Systeme S; DimensionsPipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; dimensions93.030Zunanji sistemi za odpadno vodoExternal sewage systems23.040.10Železne in jeklene ceviIron and steel pipesICS:Ta slovenski standard je istoveten z:EN 1124-2:2007SIST EN 1124-2:2009en,fr,de01-januar-2009SIST EN 1124-2:2009SLOVENSKI
STANDARDSIST EN 1124-2:20001DGRPHãþD



SIST EN 1124-2:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1124-2November 2007ICS 23.040.10; 23.040.40; 23.040.60Supersedes EN 1124-2:1999
English VersionPipes and fittings of longitudinally welded stainless steel pipeswith spigot and socket for waste water systems - Part 2: SystemS; dimensionsTubes et raccords de tubes soudés longitudinalement enacier inoxydable, à manchon enfichable pour réseauxd'assainissement - Partie 2: Système S - DimensionsRohre und Formstücke aus längsnahtgeschweißtem,nichtrostendem Stahlrohr, mit Steckmuffe fürAbwasserleitungen - Teil 2: System S; MaßeThis European Standard was approved by CEN on 7 October 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1124-2:2007: ESIST EN 1124-2:2009



EN 1124-2:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Symbols.5 5 Dimensions.6 5.1 General and tolerances.6 5.2 Sockets.7 5.3 Pipes – Shape B 1.8 5.4 Bends.9 5.4.1 Bends – Shape C 1 and C 2.9 5.4.2 Bend with stilling section – Shape
C 3.10 5.5 Branches.11 5.5.1 Single branch – Shape D 1 and reducing single branch – Shape D 11.11 5.5.2 Double branch – Shape D 2 and reducing double branch – Shape D 21.13 5.5.3 Angular branch – Shape D 3
and reducing angular branch – Shape D 31.14 5.6 Transition pipe – Shape F 1.15 5.7 Double socket – Shape F 4.16 5.8 Insertion coupling with long socket – Shape F 5.17 5.9 Sliding ring-seal coupling – Shape F 41.18 5.10 Trap – Shape G 1.19 5.11 Access pipes.20 5.11.1 Access pipe – Shape H 1.20 5.11.2 Rear access branch – Shape H 5.21 5.12 Other fittings.21 6 Socket plug – Shape K 10.22 Bibliography.23
SIST EN 1124-2:2009



EN 1124-2:2007 (E) 3 Foreword This document (EN 1124-2:2007) has been prepared by Technical Committee CEN/TC 165 “Waste water engineering”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2008, and conflicting national standards shall be withdrawn at the latest by May 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1124-2:1999. This standard, Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems consists of the following Parts:
 Part 1: Requirements, testing, quality control  Part 2: System S – Dimensions  Part 3: System X – Dimensions  Part 4: Components for vacuum drainage systems and drainage systems on ships According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 1124-2:2009



EN 1124-2:2007 (E) 4 Introduction Pipes and fittings of longitudinally welded, stainless steel pipes with spigot and socket for waste water systems as specified in this document and EN 1124–3 are used in gravity drainage systems in buildings. For vacuum drainage systems and drainage systems on ships, it was necessary to specify additional requirements and further dimensional specifications for components and joints used in these systems. Components specified in EN 1124-4 are used for vacuum drainage systems and for drainage systems in shipbuilding. SIST EN 1124-2:2009



EN 1124-2:2007 (E) 5 1 Scope This standard applies to pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems.
It specifies dimensions and tolerances for pipes, fittings and pipe connectors and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements.
This European Standard is only valid in connection with EN 1124-1. It does not apply to the marking of products. EN 1124-1/A1 applies to the marking. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1124-1:1999, Pipes and fittings of longitudinally welded, stainless steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 1124-1:1999 apply. 4 Symbols DN/OD
Nominal size with regard to the outside diameter.
d Diameter t Socket construction depths s Wall thickness L Effective length l Construction leng
...