SIST EN ISO 9908:2000/A1:2014

Technical specifications for centrifugal pumps - Class III - Amendment 1 (ISO 9908:1993/AMD 1:2011)

Covers class III requirements for centrifugal pumps or single stage, multistage, horizontal or vertical construction, coupled or closecoupled, with any drive and any installation for general application. Includes design features concerned with installation, maintenance and safety of such pumps including baseplate, coupling and auxiliary piping by excluding the drive, if it is not an integral part of the pump.

Spécifications techniques pour pompes centrifuges - Classe III - Amendement 1 (ISO 9908:1993/AMD 1:2011)

Spécifications techniques pour pompes centrifuges - Classe III - Amendement 1 (ISO 9908:1993/AMD 1:2011)

Tehnične specifikacije za centrifugalne črpalke - Razred III - Dopolnilo 1 (ISO 9908:1993/AMD 1:2011)

General Information

• Status: Published
• Publication Date: 10-Feb-2014
• ICS: 23.080 - Pumps
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 13-Jan-2014
• Due Date: 20-Mar-2014
• Completion Date: 11-Feb-2014
• Ref Project: EN ISO 9908:1997/A1:2011 - Technical specifications for centrifugal pumps - Class III - Amendment 1 (ISO 9908:1993/AMD 1:2011)

Relations

• Amends: SIST EN ISO 9908:2000 - Technical specifications for centrifugal pumps - Class III (ISO 9908:1993)
• Effective Date: 01-Mar-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9908:2000/A1:2014
01-marec-2014
7HKQLþQHVSHFLILNDFLMH]DFHQWULIXJDOQHþUSDONH5D]UHG,,,'RSROQLOR,62
$0'
Technical specifications for centrifugal pumps - Class III - Amendment 1 (ISO
9908:1993/AMD 1:2011)
Spécifications techniques pour pompes centrifuges - Classe III - Amendement 1 (ISO
9908:1993/AMD 1:2011)
Spécifications techniques pour pompes centrifuges - Classe III - Amendement 1 (ISO
9908:1993/AMD 1:2011)
Ta slovenski standard je istoveten z: EN ISO 9908:1997/A1:2011
ICS:
23.080 ýUSDONH Pumps
SIST EN ISO 9908:2000/A1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9908:2000/A1:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 9908:2000/A1:2014


EUROPEAN STANDARD
EN ISO 9908:1997/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2011
ICS 23.080
English Version
Technical specifications for centrifugal pumps - Class III -
Amendment 1 (ISO 9908:1993/AMD 1:2011)
Spécifications techniques pour pompes centrifuges -
Classe III - Amendement 1 (ISO 9908:1993/AMD 1:2011)
This amendment A1 modifies the European Standard EN ISO 9908:1997; it was approved by CEN on 17 April 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9908:1997/A1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9908:2000/A1:2014
EN ISO 9908:1997/A1:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 9908:2000/A1:2014
EN ISO 9908:1997/A1:2011 (E)
Foreword
This document (EN ISO 9908:1997/A1:2011) has been prepared by Technical Committee ISO/TC 115
"Pumps" in collaboration with Technical Committee CEN/TC 197 “Pumps” the secretariat of which is held by
AFNOR.
This Amendment to the European Standard EN ISO 9908:1997 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by October 2011, and
conflicting national standards shall be withdrawn at the latest by October 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Swe
...