SIST EN 14420-2:2005

Hose fittings with clamp units - Part 2: Hose side parts of hose tail

This document specifies requirements for the hose tail of hose fittings according to EN 14420 1 for use with clamp units according to EN 14420 3.
Maximum working pressure 25 bar, maximum working temperature 65 °C.

Schlaucharmaturen mit Klemmfassungen - Teil 2: Schlauchseitige Stutzenteile

Raccords pour flexibles avec demi-coquille - Partie 2: Douilles pour flexibles

Le présent document prescrit les exigences applicables aux douilles pour flexibles conformément a
l?EN 14420-1 destinées a etre utilisées avec des demi-coquilles conformément a l?EN 14420-3.
La pression de service maximale est de 25 bar et la température de service maximale est de 65 °C.

Cevni fitingi z objemkami - 2. del: Stranski cevni nastavki

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2005
• Withdrawal Date: 22-Jul-2013
• ICS: 23.040.60 - Flanges, couplings and joints
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 22-Jul-2013
• Due Date: 14-Aug-2013
• Completion Date: 23-Jul-2013
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 14420-2:2004 - Hose fittings with clamp units - Part 2: Hose side parts of hose tail

Relations

• Replaced By: SIST EN 14420-2:2013 - Hose fittings with clamp units - Part 2: Hose side parts of hose tail
• Effective Date: 01-Sep-2013
• Replaced By: SIST EN 14420-2:2013 - Hose fittings with clamp units - Part 2: Hose side parts of hose tail
• Effective Date: 08-Jun-2022
• Revised: SIST EN 14420-2:2013 - Hose fittings with clamp units - Part 2: Hose side parts of hose tail
• Effective Date: 03-Jul-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevni fitingi z objemkami - 2. del: Stranski cevni nastavkiSchlaucharmaturen mit Klemmfassungen - Teil 2: Schlauchseitige StutzenteileRaccords pour flexibles avec demi-coquille - Partie 2: Douilles pour flexiblesHose fittings with clamp units - Part 2: Hose side parts of hose tail23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and jointsICS:Ta slovenski standard je istoveten z:EN 14420-2:2004SIST EN 14420-2:2005en01-marec-2005SIST EN 14420-2:2005SLOVENSKI
STANDARD



SIST EN 14420-2:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14420-2November 2004ICS 23.040.70English versionHose fittings with clamp units - Part 2: Hose side parts of hosetailRaccords pour flexibles avec demi-coquille - Partie 2:Douilles pour flexiblesSchlaucharmaturen mit Klemmfassungen - Teil 2:Schlauchseitige StutzenteileThis European Standard was approved by CEN on 30 September 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14420-2:2004: ESIST EN 14420-2:2005



EN 14420-2:2004 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Requirements.4 3.1 Dimensions.4 3.2 Surface finish.7 4 Materials.7 5 Marking.7 Bibliography.8
SIST EN 14420-2:2005



EN 14420-2:2004 (E) 3 Foreword This document (EN 14420-2:2004) has been prepared by Technical Committee CEN/TC 218 "Rubber and plastics hoses and hose assemblies", the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by May 2005. EN 14420 consists at the time of publication of the following parts: EN 14420-1, Hose fittings with clamp units — Part 1: Requirements, survey, designation and testing EN 14420-2, Hose fittings with clamp units — Part 2: Hose side parts of hose tail EN 14420-3, Hose fittings with clamp units — Part 3: Clamp units, bolted or pinned EN 14420-4, Hose fittings with clamp units — Part 4: Flange connections EN 14420-5, Hose fittings with clamp units — Part 5: Threaded connections EN 14420-6, Hose fittings with clamp units — Part 6: TW tank truck couplings EN 14420-7, Hose fittings with clamp units — Part 7: Cam locking couplings EN 14420-8, Hose fittings with clamp units — Part 8: Symmetrical half coupling (Guillemin system) According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
...