kSIST FprEN ISO 25649-7:2024

Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for Class E devices (ISO/FDIS 25649-7:2024)

This document specifies additional specific safety requirements and test methods for Class E floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class E floating leisure articles as specified in ISO 25649-1:2024, Table 1.
Class E devices are inflatable boats of a buoyancy of less than 1 800 N with a hull length of more than 1,2 m and less than 2,5 m.
Class E devices are intended for use in bathing areas or in protected and safe shore zones.
NOTE 1        Typical products forming Class E (see Annex F):
—      inflatable boats for rowing or paddling of near oval shape with or without transom;
—      canoes and kayaks;
—      inflatable boats made from plastic sheets or from reinforced materials;
—      motor kit/sail kit as additional option.
NOTE 2        Typical applications of Class E devices:
—      moving from one place to another for pleasure purposes;
—      staying on the water for relaxing;
—      moving from shore to the main boat, transportation of persons and load (tender boat).

Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 7: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Artikel der Klasse E (ISO/FDIS 25649-7:2024)

Dieses Dokument gilt für schwimmende Freizeitartikel für den Gebrauch auf und im Wasser der Klasse E nach ISO 25649-1:2021, unabhängig davon, ob der Auftrieb durch Aufblasen oder selbstschwimmende Materialien erzielt wird.
Dieses Dokument gilt im Zusammenhang mit ISO 25649-1:20xx und ISO 25649-2:20xx.
Klasse E Geräte sind für den Einsatz in Badegebieten oder in geschützten und sicheren Uferzonen vorgesehen.
ANMERKUNG 1 Typische Produkte der Klasse E (siehe Anhang F):
- aufblasbare Boote zum Rudern oder Paddeln in nahezu ovaler Form, mit oder ohne Heckspiegel;
- Kanus und Kajaks;
- aufblasbare Boote aus Kunststoffen oder aus verstärkten Werkstoffen;
- Motorausstattung/Segelausstattung als zusätzliche Wahlmöglichkeit.
ANMERKUNG 2 Typische Orte der Verwendung von Geräten der Klasse E:
- Fahrten von A nach B zum Vergnügen;
- Aufenthalt auf dem Wasser zur Entspannung;
- Fahrten vom Strand zum Hauptboot, Transport von Personen und Gepäck (Beiboot).

Articles de loisirs flottants à utiliser sur ou dans l'eau - Partie 7: Exigences de sécurité et méthodes d'essai complémentaires propres aux dispositifs de Classe E (ISO/FDIS 25649-7:2024)

Le présent document spécifie des méthodes d’essai et des exigences de sécurité spécifiques supplémentaires pour les articles de loisirs flottants à utiliser sur ou dans l’eau de Classe E, que la flottabilité soit obtenue par gonflage ou par un matériau ayant une flottabilité propre.
Le présent document s’applique aux articles de loisirs flottants de Classe E spécifiés dans l’ISO 25649-1:2024, Tableau 1.
Les dispositifs de Classe E sont des bateaux gonflables d’une flottabilité inférieure à 1 800 N d’une longueur de coque de plus de 1,2 m et de moins de 2,5 m.
Les articles de Classe E sont destinés à être utilisés dans des zones de baignade ou dans des zones côtières protégées et sûres.
NOTE 1        Produits types constituant la Classe E (voir l’Annexe F) :
—      bateaux gonflables à rames ou à pagaies de forme presque ovale, avec ou sans tableau arrière ;
—      canoës et kayaks ;
—      bateaux gonflables fabriqués à l’aide de feuilles de matière plastique ou de matériaux renforcés ;
—      en option : bloc moteur/équipement de voilure.
NOTE 2        Applications types des dispositifs de Classe E :
—      aller d’un point A à un point B pour le plaisir ;
—      rester sur l’eau pour se relaxer ;
—      aller du rivage jusqu’au bateau principal, transport de personnes et de charges (bateau annexe).

Plavajoči pripomočki za prosti čas, ki se uporabljajo na vodi in v njej - 7. del: Dodatne posebne varnostne zahteve in preskusne metode za pripomočke razreda E (ISO/FDIS 25649-7:2024)

General Information

• Status: Not Published
• Public Enquiry End Date: 19-Dec-2021
• ICS: 97.220.40 - Outdoor and water sports equipment
• Technical Committee: SPO - Sports
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 29-Aug-2024
• Due Date: 17-Oct-2024
• Directive: 2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
• Mandate: M/372 - Standardisation mandate to CEN relating to floating leisure products for use on or in the water
• Ref Project: FprEN ISO 25649-7 - Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for Class E devices (ISO/FDIS 25649-7:2024)

Relations

• Revised: SIST EN ISO 25649-7:2017 - Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25469-7:2017)
• Effective Date: 19-Jan-2023
• Revised: SIST EN ISO 25649-7:2017 - Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25469-7:2017)
• Effective Date: 18-Jan-2023
• Revised: SIST EN ISO 25649-7:2017 - Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25469-7:2017)
• Effective Date: 16-Oct-2019

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 25649-7:2021
01-december-2021
Plavajoči pripomočki za prosti čas, ki se uporabljajo na vodi in v njej - 7. del:
Dodatne posebne varnostne zahteve in preskusne metode za pripomočke razreda
E (ISO/DIS 25649-7:2021)
Floating leisure articles for use on and in the water - Part 7: Additional specific safety
requirements and test methods for Class E devices (ISO/DIS 25649-7:2021)
Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 7: Zusätzliche
besondere sicherheitstechnische Anforderungen und Prüfverfahren für Artikel der Klasse
E (ISO/DIS 25649-7:2021)
Articles de loisirs flottants à utiliser sur ou dans l'eau - Partie 7: Exigences de sécurité et
méthodes d'essai complémentaires propres aux dispositifs de Classe E (ISO/DIS 25649-
7:2021)
Ta slovenski standard je istoveten z: prEN ISO 25649-7
ICS:
97.220.40 Oprema za športe na Outdoor and water sports
prostem in vodne športe equipment
oSIST prEN ISO 25649-7:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 25649-7:2021
oSIST prEN ISO 25649-7:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 25649-7
ISO/TC 83 Secretariat: DIN
Voting begins on: Voting terminates on:
2021-10-01 2021-12-24
Floating leisure articles for use on and in the water —
Part 7:
Additional specific safety requirements and test methods
for Class E devices
Articles de loisirs flottants à utiliser sur ou dans l'eau —
Partie 7: Exigences de sécurité et méthodes d'essai complémentaires propres aux dispositifs de Classe E
ICS: 97.220.40
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 25649-7:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021

oSIST prEN ISO 25649-7:2021
ISO/DIS 25649-7:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

oSIST prEN ISO 25649-7:2021
ISO/DIS 25649-7:2021(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Materials . 3
5 Construction and functional components of boats . 3
5.1 Conditioning . 3
5.2 Hull integrity . 3
5.2.1 Requirements . 3
5.2.2 Test method . 3
5.3 Manual lifting and carrying devices . 4
5.3.1 Requirements . 4
5.3.2 Test method . 4
5.4 Rowlocks and oars . 4
5.4.1 Requirements . 4
5.4.2 Test methods . 4
5.5 Hull drainage . 5
5.6 Towing device . 5
5.7 Seating and attachment systems (where offered as standard or optional equipment). 5
6 Safety requirements and test methods . 5
6.1 Minimum area and maximum permissible number of persons . 5
6.1.1 Requirement . 5
6.1.2 Testing . 5
6.2 Static stability of the boat . 6
6.2.1 Requirement . 6
6.2.2 Test method . 6
6.3 Dimensional stability when getting on and off the boat . 7
6.3.1 Requirement . 7
6.3.2 Testing . 8
6.4 Maximum load capacity . 8
6.4.1 Requirement . 8
6.4.2 Testing . 8
6.5 Safety ropes and grab handles . 8
6.5.1 Requirement . 8
6.5.2 Test method . 8
6.6 Residual buoyancy specific for boats . 9
6.6.1 Requirement . 9
6.6.2 Test method . 9
6.7 Manoeuvrability . 9
6.7.1 Requirement . 9
6.7.2 Test method . 9
7 Performance requirements and test methods for boats . 9
7.1 General . 9
7.2 Strength and performance of the towing device for boats . 9
7.2.1 Requirement . 9
7.2.2 Test method . 9
7.3 Rowing test (where applicable, see 5.4) .10
7.4 Water tightness test for boats .10
7.4.1 Requirement .10
7.4.2 Test method .10
oSIST prEN ISO 25649-7:2021
ISO/DIS 25649-7:2021(E)
8 Standard equipment and accessories for boats .10
8.1 Requirement .10
8.2 Testing .10
9 Marking .10
10 Instructions for use for boats .10
11 Exclusions .12
Annex A (normative) Inflatable canoes, kayaks and sit-on-top kayaks .13
Annex B (normative) Inflatable boat propelled by sail or motor .15
Annex C (informative) General arrangement of a typical boat with the hull made of non-
reinforced material .
...