SIST EN 61996-1:2008
(Main)Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) -- Part 1: Voyage data recorder (VDR) - Performance requirements, methods of testing and required test results
Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) -- Part 1: Voyage data recorder (VDR) - Performance requirements, methods of testing and required test results
This part of IEC 61996 specifies the minimum performance requirements, technical characteristics and methods of testing, and required test results, for shipborne voyage data recorder (VDR) installations as required by Chapter V of the International Convention for Safety of Life at Sea (SOLAS), as amended. It takes account of IMO resolution A.694(17) and is associated with IEC 60945. When a requirement in this standard is different from IEC 60945, the requirement in this standard takes precedence. This standard incorporates the applicable parts of the performance standards included in IMO Resolutions A.861(20) and MSC.214(81) Annex 1.
Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt - Fahrtdatenaufzeichnungsgeräte (VDR) auf Seeschiffen -- Teil 1: Fahrtdatenaufzeichnungsgerät (VDR) - Leistungsanforderungen, Prüfverfahren und geforderte Prüfergebnisse
Matériels et systèmes de navigation et de radiocommunication maritimes - Enregistreurs des données du voyage (VDR) de bord - Partie 1: Enregistreur des données du voyage (VDR) - Exigences de fonctionnement, méthodes d'essai et résultats d'essai exigés
Pomorska navigacijska in radiokomunikacijska oprema - Ladijski zapisovalnik podatkov o plovbi ("ladijska črna skrinjica") (VDR) - 1. del: Zapisovalnik podatkov o plovbi (VDR) - Tehnične zahteve - Metode preskušanja in zahtevani rezultati preskusov (IEC 61996-1:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61996-1:2008
01-november-2008
1DGRPHãþD
SIST EN 61996:2004
3RPRUVNDQDYLJDFLMVNDLQUDGLRNRPXQLNDFLMVNDRSUHPD/DGLMVNL]DSLVRYDOQLN
SRGDWNRYRSORYEL ODGLMVNDþUQDVNULQMLFD 9'5 GHO =DSLVRYDOQLNSRGDWNRY
RSORYEL 9'5 7HKQLþQH]DKWHYH0HWRGHSUHVNXãDQMDLQ]DKWHYDQLUH]XOWDWL
SUHVNXVRY ,(&
Maritime navigation and radiocommunication equipment and systems - Shipborne
voyage data recorder (VDR) - Part 1: Voyage data recorder (VDR) - Performance
requirements - Methods of testing and required test results (IEC 61996-1:2007)
Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt -
Fahrtdatenaufzeichnungsgeräte (VDR) auf Seeschiffen - Teil 1:
Fahrtdatenaufzeichnungsgerät (VDR) - Leistungsanforderungen, Prüfverfahren und
geforderte Prüfergebnisse (IEC 61996-1:2007)
Matériels et systèmes de navigation et de radiocommunication maritimes - Enregistreurs
des données du voyage (VDR) de bord - Partie 1: Enregistreur des données du voyage
(VDR) - Exigences de fonctionnement, méthodes d'essai et résultats d'essai exigés (CEI
61996-1:2007)
Ta slovenski standard je istoveten z: EN 61996-1:2008
ICS:
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
SIST EN 61996-1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61996-1:2008
---------------------- Page: 2 ----------------------
SIST EN 61996-1:2008
EUROPEAN STANDARD
EN 61996-1
NORME EUROPÉENNE
July 2008
EUROPÄISCHE NORM
ICS 47.020.70 Supersedes EN 61996:2000
English version
Maritime navigation and radiocommunication equipment and systems -
Shipborne voyage data recorder (VDR) -
Part 1: Voyage data recorder (VDR) -
Performance requirements, methods of testing and required test results
(IEC 61996-1:2007)
Matériels et systèmes de navigation Navigations-
et de radiocommunication maritimes - und Funkkommunikationsgeräte
Enregistreurs des données du voyage und -systeme für die Seeschifffahrt -
(VDR) de bord - Fahrtdatenaufzeichnungsgeräte (VDR)
Partie 1: Enregistreur des données auf Seeschiffen -
du voyage (VDR) - Teil 1: Fahrtdatenaufzeichnungsgerät
Exigences de fonctionnement, méthodes (VDR) -
d'essai et résultats d'essai exigés Leistungsanforderungen, Prüfverfahren
(CEI 61996-1:2007) und geforderte Prüfergebnisse
(IEC 61996-1:2007)
This European Standard was approved by CENELEC on 2008-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in two official versions (English, German). A version in any other language made
by translation under the responsibility of a CENELEC member into its own language and notified to the Central
Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61996-1:2008 E
---------------------- Page: 3 ----------------------
SIST EN 61996-1:2008
EN 61996-1:2008 - 2 -
Foreword
The text of document 80/470/CDV, future edition 1 of IEC 61996-1, prepared by TC 80, Maritime
navigation and radiocommunication equipment and systems, was submitted to the IEC-CENELEC
Parallel Unique Acceptance Procedure and was approved by CENELEC as EN 61996-1 on 2008-06-01.
This European Standard supersedes EN 61996:2000.
A new requirement has been added to 4.3.5 for an interface to be used for downloading the stored data to
an external computer. This is defined in Annex C which is derived from amendments published by the
IMO in resolution MSC.214(81). An optional LAN interface for connection to radar has been added in 5.8.
Some corrections to the text have also been made. Subclause 4.3.5 (Assessment of final recording
medium) has been renumbered as 4.3.4.2 and Subclause 4.3.6 (Interfaces) has been renumbered as
4.3.5.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2009-03-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-06-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61996-1:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60936-1 NOTE Harmonized as EN 60936-1:2000 (not modified).
IEC 60936-3 NOTE Harmonized as EN 60936-3:2002 (not modified).
IEC 62388 NOTE Harmonized as EN 62388:2008 (not modified).
ISO 8728 NOTE Harmonized as EN ISO 8728:1998 (not modified).
ISO 11674 NOTE Harmonized as EN ISO 11674:2001 (not modified).
__________
---------------------- Page: 4 ----------------------
SIST EN 61996-1:2008
- 3 - EN 61996-1:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60068-2-27 1987 Basic environmental testing procedures - EN 60068-2-27 1993
Part 2: Tests - Test Ea and guidance: Shock
IEC 60268-16 2003 Sound system equipment - EN 60268-16 2003
Part 16: Objective rating of speech
intelligibility by speech transmission index
IEC 60945 2002 Maritime navigation and radiocommunication EN 60945 2002
equipment and systems - General
requirements - Methods of testing and
required test results
1)
IEC 61097-2 - Global maritime distress and safety system - -
(GMDSS) -
Part 2: COSPAS-SARSAT EPIRB - Satellite
emergency position indicating beacon
operating on 406 MHz - Operational and
performance requirements, methods of testing
and required test results
IEC 61097-7 1996 Global maritime distress and safety system - -
(GMDSS) -
Part 7: Shipborne VHF radiotelephone
transmitter and receiver - Operational and
performance requirements, methods of testing
and required test results
1) 2)
IEC 61162-1 - Maritime navigation and radiocommunication EN 61162-1 2008
equipment and systems - Digital interfaces -
Part 1: Single talker and multiple listeners
1) 2)
IEC 61162-2 - Maritime navigation and radiocommunication EN 61162-2 1998
equipment and systems - Digital interfaces -
Part 2: Single talker and multiple listeners,
high-speed transmission
IEC 61260 1995 Electroacoustics - Octave-band and EN 61260 1995
fractional-octave-band filters
IEC 61672-1 2002 Electroacoustics - Sound level meters - EN 61672-1 2003
Part 1: Specifications
1)
IMO Resolution - Use and fitting of retro-reflective materials on - -
A.658(16) life-saving appliances
1)
IMO Resolution - Performance standards for float-free release - -
A.662(16) and activation arrangements for emergency
radio equipment
1)
Undated reference.
2)
Valid edition at date of issue.
---------------------- Page: 5 ----------------------
SIST EN 61996-1:2008
EN 61996-1:2008 - 4 -
Publication Year Title EN/HD Year
IMO Resolution 1991 Testing of life saving appliances - -
A.689
1)
IMO Resolution - General requirements for shipborne radio - -
A.694(17) equipment forming part of the global maritime
distress and safety system (GMDSS) and for
electronic navigational aids
1)
IMO Resolution - Performance standards for float-free satellite - -
A.810(19) emergency position-indicating radio beacons
(EPIRBs) operating on 406 MHz
1)
IMO Resolution - Code on alarms and indicators - -
A.830(19)
1)
IMO Resolution - Performance standards for shipborne - -
A.861(20) voyage data recorders (VDRs)
1)
IMO Resolution - Amendments to the recommendation on - -
MSC 214(81) performance standards for shipborne voyage
Annex 1 data recorders (VBDRs) (Resolution
A.861(20))
IMO 1974 International convention for the Safety of Life - -
at Sea (SOLAS)
ITU-R M.633-1 1990 Transmission characteristics of a satellite - -
emergency position-indicating radiobeacon
(satellite EPIRB) system operating through a
low polar-orbiting satellite system in the
406 MHz band
1)
Eurocae: ED56A - Minimum operational performance - -
Amendment 1 specification (MOPS) for cockpit voice
recorder system
VESA 1996 Video electronics standards association - - -
Discrete monitor timings standard 1.0,
Revision 0.7 (DMTS)
SAE AS 8045 1988 Engeneering Society for advancing mobility - -
land sea air and space - Minimum
performance standard for underwater locating
devices - acoustic-self-powered
---------------------- Page: 6 ----------------------
SIST EN 61996-1:2008
IEC 61996-1
Edition 1.0 2007-11
INTERNATIONAL
STANDARD
Maritime navigation and radiocommunication equipment and systems –
Shipborne voyage data recorder (VDR) –
Part 1: Voyage data recorder (VDR) – Performance requirements, methods of
testing and required test results
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XA
ICS 47.020.70 ISBN 2-8318-9355-0
---------------------- Page: 7 ----------------------
SIST EN 61996-1:2008
– 2 – 61996-1 © IEC:2007(E)
CONTENTS
FOREWORD.5
1 Scope.7
2 Normative references.7
3 Terms, definitions and abbreviations .8
3.1 Definitions .8
3.2 Abbreviations.9
4 Performance requirements.10
4.1 General .10
4.2 Purpose.10
4.3 Operational requirements.10
4.3.1 Design and construction.10
4.3.2 Maintenance of sequential records .11
4.3.3 Co-relation in date and time .11
4.3.4 Protective capsule .11
4.3.5 Interfaces .12
4.4 Data selection and security .12
4.4.1 Selection of data items.13
4.4.2 Configuration data .13
4.4.3 Resistance to tampering .13
4.4.4 Recording integrity.13
4.5 Operation .14
4.5.1 Recording and saving of data.14
4.5.2 Power source.14
4.5.3 Dedicated reserve power source .14
4.5.4 Recording period and duration .14
4.6 Data items to be recorded.15
4.6.1 Date and time .15
4.6.2 Ship’s position .15
4.6.3 Speed.15
4.6.4 Heading.15
4.6.5 Bridge audio .15
4.6.6 Communications audio.16
4.6.7 Radar data – post-display selection.16
4.6.8 Echo sounder .16
4.6.9 Main alarms.16
4.6.10 Rudder order and response.16
4.6.11 Engine order and response .16
4.6.12 Hull openings (doors) status.16
4.6.13 Watertight and fire door status .17
4.6.14 Accelerations and hull stresses .17
4.6.15 Wind speed and direction.17
5 Technical characteristics.17
5.1 Co-relation in date and time .17
5.2 Particular design requirements for the protective capsule.17
5.3 Location beacon(s) for the protective capsule .17
5.4 Survivability of recorded data.18
---------------------- Page: 8 ----------------------
SIST EN 61996-1:2008
61996-1 © IEC:2007(E) – 3 –
5.4.1 Long-term retention under normal conditions.18
5.4.2 Survival following an incident .18
5.5 Information to be included in the manufacturer’s documentation.18
5.5.1 Installation guidelines .18
5.5.2 Operation and maintenance manual .19
5.5.3 Information for use by an investigation authority .19
5.6 Bridge audio specifications .19
5.6.1 Input interface.19
5.6.2 Reference signal.19
5.6.3 Audio frequency response.19
5.6.4 Quality index.20
5.6.5 Audio noise level – signal to noise and distortion.20
5.7 Communications audio .20
5.7.1 Input interfaces.20
5.7.2 Reference signal.20
5.7.3 Audio frequency response.20
5.7.4 Quality index.20
5.7.5 Audio noise level – signal to no signal .21
5.7.6 Audio noise level – signal to noise and distortion (SINAD) .21
5.8 Radar data – post-display selection.21
5.8.1 Input interface.21
5.8.2 Image outputs.21
6 Methods of testing and required test results .22
6.1 General .22
6.1.1 Test setup .22
6.1.2 Download and playback equipment .23
6.1.3 Sequence of tests .23
6.1.4 Requirements to be checked by inspection only.23
6.1.5 Environmental test conditions for normal operation.23
6.1.6 Recording duration.24
6.1.7 Reserve power source .24
6.1.8 Recharging of reserve source of power .24
6.1.9 Brief interruption of electrical power .24
6.1.10 System integrity .25
6.1.11 Maintenance of sequential records .25
6.1.12 Co-relation in date and time .25
6.1.13 Design and construction of the protective capsule .25
6.1.14 Selection of data items.28
6.1.15 Power source.28
6.2 Data items to be recorded.28
6.2.1 Date/time – ship’s position – speed – heading .28
6.2.2 Bridge audio .28
6.2.3 Communications audio.32
6.2.4 Radar data, post-display selection.35
6.2.5 Echo sounder – main alarms – rudder order and response – engine order
and response – hull openings (doors) status – watertight and doors status
– acceleration and hull stresses – wind speed and direction .43
6.2.6 Interfaces .44
---------------------- Page: 9 ----------------------
SIST EN 61996-1:2008
– 4 – 61996-1 © IEC:2007(E)
Annex A (normative) IEC 61162 sentence formats .45
Annex B (informative) Mandatory alarms .46
Annex C (normative) Download and playback equipment for investigating authorities .48
Annex D (informative) Requirement/test – cross references.52
54
Bibliography .
Figure 1 – Test set-up block diagram.37
Figure 2 – Comparison of images .41
Table 1 – Bridge audio, signal to no signal measurements .31
Table 2 – Bridge audio, signal to noise and distortion (SINAD) measurements .32
Table 3 – Communications audio, signal to no-signal measurements .34
Table 4 – Communications audio, signal to noise and distortion (SINAD) measurements .35
Table 5 – Intersection colours of test images 1 and 2 .39
Table A.1 – References in this standard .45
Table B.1 – IMO instrument: SOLAS Chapter II-1 .46
Table B.2 – IMO instrument: SOLAS Chapter II-2 .47
Table B.3 – IMO instrument: Resolution A.481.47
Table D.1 – Subject list and subclauses .52
---------------------- Page: 10 ----------------------
SIST EN 61996-1:2008
61996-1 © IEC:2007(E) – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MARITIME NAVIGATION AND RADIOCOMMUNICATION
EQUIPMENT AND SYSTEMS –
SHIPBORNE VOYAGE DATA RECORDER (VDR) –
Part 1: Voyage data recorder (VDR) –
Performance requirements, methods of testing
and required test results
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-
operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in
this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO)
in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all interested
IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between any
IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment
declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or other
damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising
out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61996-1 has been prepared by IEC technical committee 80: Maritime
navigation and radiocommunication equipment and systems.
This first edition cancels and replaces IEC 61996 published in 2000 and constitutes a technical
revision. A new requirement has been added to 4.3.5 for an interface to be used for downloading
the stored data to an external computer. This is defined in Annex C which is derived from
amendments published by the IMO in resolution MSC.214(81). An optional LAN interface for
connection to radar has been added in 5.8. Some corrections to the text have also been made.
Subclause 4.3.5 (Assessment of final recording medium) has been renumbered as 4.3.4.2 and
subclause 4.3.6 (Interfaces) has been renumbered as 4.3.5.
---------------------- Page: 11 ----------------------
SIST EN 61996-1:2008
– 6 – 61996-1 © IEC:2007(E)
The text of this standard is based on the following documents:
CDV Report on voting
80/470/CDV 80/499/RVC
Full information on the voting for the approval of this standard can be found in the report on voting
indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 61996 series, under the general title Maritime navigation and
radiocommunication equipment and systems – Shipborne voyage data recorder (VDR), can be
found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
---------------------- Page: 12 ----------------------
SIST EN 61996-1:2008
61996-1 © IEC:2007(E) – 7 –
MARITIME NAVIGATION AND RADIOCOMMUNICATION
EQUIPMENT AND SYSTEMS –
SHIPBORNE VOYAGE DATA RECORDER (VDR) –
Part 1: Voyage data recorder (VDR) –
Performance requirements, methods of testing
and required test results
1 Scope
This part of IEC 61996 specifies the minimum performance requirements, technical characteristics
and methods of testing, and required test results, for shipborne voyage data recorder (VDR)
installations as required by Chapter V of the International Convention for Safety of Life at Sea
(SOLAS), as amended. It takes account of IMO resolution A.694(17) and is associated with
IEC 60945. When a requirement in this standard is different from IEC 60945, the requirement in this
standard takes precedence.
This standard incorporates the applicable parts of the performance standards included in IMO
Resolutions A.861(20) and MSC.214(81) Annex 1.
NOTE All text of this standard, whose wording is identical to that of IMO Resolution A.861, is printed in italics, and the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.