SIST EN IEC 61162-1:2024

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners (IEC 61162-1:2024)

IEC 61162-1:2024 contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This document is intended to support one-way serial data transmission from a single talker to one or more listeners. These data are in printable ASCII form and can include information such as position, speed, depth, frequency allocation, etc. Typical messages can be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this document are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, it is important this document is used with caution in all safety applications. For applications where a faster transmission rate is necessary, IEC 61162-2 applies. For applications to shore based equipment of the automatic identification system (AIS) the IEC 62320 series applies.

Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt - Digitale Schnittstellen - Teil 1: Ein Datensender und mehrere Datenempfänger (IEC 61162-1:2024)

Matériels et systèmes de navigation et de radiocommunication maritimes - Interfaces numériques - Partie 1: Émetteur unique et récepteurs multiples (IEC 61162-1:2024)

L'IEC 61162-1:2024 contient les exigences pour la communication des données entre les instruments maritimes électroniques, les matériels de navigation et de radiocommunications lorsqu'ils sont interconnectés par l'intermédiaire d'un système approprié. Le présent document est destiné à prendre en charge l'émission unidirectionnelle de données série entre un seul émetteur et un ou plusieurs récepteurs. Ces données sont au format ASCII imprimable et peuvent inclure des informations telles que la position, la vitesse, la profondeur, l'allocation de fréquences, etc. Les messages types peuvent être de longueur comprise entre environ 11 et 79 caractères au maximum et nécessitent généralement une émission pas plus rapide qu'un seul message par seconde. Les définitions électriques du présent document ne sont pas destinées à gérer les applications à large bande passante comme les radars ou l'imagerie vidéo, ou encore les bases de données intensives et les applications de transfert de fichiers. En l'absence de disposition assurant l'émission des messages et compte tenu de la capacité limitée de vérification des erreurs, il est important d'utiliser le présent document avec précaution dans toutes les applications de sécurité. Pour les applications dans lesquelles un débit d'émission plus rapide est nécessaire, l'IEC 61162-2 s'applique.

Pomorska navigacijska in radiokomunikacijska oprema in sistemi - Digitalni vmesniki - 1. del: Enosmerna komunikacija: en govorec - več poslušalcev (IEC 61162-1:2024)

Standard IEC 61162-1:2024 vsebuje zahteve za podatkovno komunikacijo med pomorskimi elektronskimi instrumenti, navigacijsko in radiokomunikacijsko opremo ob povezavi z ustreznim sistemom. Ta dokument je namenjen podpori enosmernega prenosa podatkov od enega govorca do enega ali več poslušalcev. Ti podatki so v natisljivem formatu ASCII in lahko vključujejo informacije, kot so položaj, hitrost, globina, dodelitev frekvenc itd. Tipična sporočila so lahko dolga od 11 do 79 znakov in na splošno ne zahtevajo prenosa, hitrejšega od prenosa enega sporočila na sekundo. Električne definicije v tem dokumentu niso namenjene za aplikacije, ki zahtevajo večjo pasovno širino (npr. radar ali videoposnetki), ali podatkovno intenzivne aplikacije (baze podatkov, prenos datotek). Zajamčena dostava sporočil ni predvidena, zmožnost preverjanja napak pa je omejena, zato je pomembno, da se ta dokument uporablja previdno v vseh varnostnih aplikacijah. Za vrste uporabe, pri katerih je potreben hitrejši prenos, se uporablja standard IEC 61162-2. Za kopensko opremo sistema za avtomatično identifikacijo (AIS) se uporablja standard IEC 62320.

General Information

• Status: Published
• Public Enquiry End Date: 31-May-2023
• Publication Date: 10-Jun-2024
• ICS: 33.060.01 - Radiocommunications in general
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 29-May-2024
• Due Date: 03-Aug-2024
• Completion Date: 11-Jun-2024
• Ref Project: EN IEC 61162-1:2024 - Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners

Relations

• Revises: SIST EN 61162-1:2017 - Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners (IEC 61162-1:2016)
• Effective Date: 07-Feb-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2024
Pomorska navigacijska in radiokomunikacijska oprema in sistemi - Digitalni
vmesniki - 1. del: Enosmerna komunikacija: en govorec - več poslušalcev (IEC
61162-1:2024)
Maritime navigation and radiocommunication equipment and systems - Digital interfaces
- Part 1: Single talker and multiple listeners (IEC 61162-1:2024)
Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt -
Digitale Schnittstellen - Teil 1: Ein Datensender und mehrere Datenempfänger (IEC
61162-1:2024)
Matériels et systèmes de navigation et de radiocommunication maritimes - Interfaces
numériques - Partie 1: Émetteur unique et récepteurs multiples (IEC 61162-1:2024)
Ta slovenski standard je istoveten z: EN IEC 61162-1:2024
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61162-1

NORME EUROPÉENNE
EUROPÄISCHE NORM May 2024
ICS 47.020.70 Supersedes EN 61162-1:2016
English Version
Maritime navigation and radiocommunication equipment and
systems - Digital interfaces - Part 1: Single talker and multiple
listeners
(IEC 61162-1:2024)
Matériels et systèmes de navigation et de Navigations- und Funkkommunikationsgeräte und -systeme
radiocommunication maritimes - Interfaces numériques - für die Seeschifffahrt - Digitale Schnittstellen - Teil 1: Ein
Partie 1: Émetteur unique et récepteurs multiples Datensender und mehrere Datenempfänger
(IEC 61162-1:2024) (IEC 61162-1:2024)
This European Standard was approved by CENELEC on 2024-05-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61162-1:2024 E

European foreword
The text of document 80/1093/FDIS, future edition 6 of IEC 61162-1, prepared by IEC/TC 80 "Maritime
navigation and radiocommunication equipment and systems" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 61162-1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-02-09
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-05-09
document have to be withdrawn
This document supersedes EN 61162-1:2016 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61162-1:2024 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 61023 NOTE Approved as EN 61023
IEC 61108-1 NOTE Approved as EN 61108-1
IEC 61108-2 NOTE Approved as EN 61108-2
IEC 61108-3 NOTE Approved as EN 61108-3
IEC 61108-4 NOTE Approved as EN 61108-4
IEC 61108-5 NOTE Approved as EN IEC 61108-5
IEC 61162-2 NOTE Approved as EN 61162-2
IEC 61162-450 NOTE Approved as EN IEC 61162-450
IEC 61174 NOTE Approved as EN 61174
IEC 61924-2 NOTE Approved as EN IEC 61924-2
IEC 61993-2 NOTE Approved as EN IEC 61993-2
IEC 61996-1 NOTE Approved as EN 61996-1
IEC 61996-2 NOTE Approved as EN 61996-2
IEC 62065 NOTE Approved as EN 62065
IEC 62287-2 NOTE Approved as EN 62287-2
IEC 62288 NOTE Approved as EN IEC 62288
IEC 62320 (series) NOTE Approved as EN 62320 (series)
IEC 62320-1 NOTE Approved as EN 62320-1
IEC 62320-2 NOTE Approved as EN 62320-2
IEC 62320-3 NOTE Approved as EN 62320-3
IEC 62388 NOTE Approved as EN 62388
IEC 62616 NOTE Approved as EN 62616
IEC 62923-1 NOTE Approved as EN IEC 62923-1
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60945 - Maritime navigation and EN 60945 -
radiocommunication equipment and
systems - General requirements - Methods
of testing and required test results
ISO/IEC 8859-1 1998 Information technology - 8-bit single-byte - -
coded graphic character sets - Part 1: Latin
alphabet No.1
ITU-T 1996 Electrical characteristics for balanced - -
Recommendation double-current interchange circuits
X.27/V.11 operating at data signalling rates up to 10
Mbit/s
IEC 61162-1 ®
Edition 6.0 2024-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Maritime navigation and radiocommunication equipment and systems – Digital
interfaces –
Part 1: Single talker and multiple listeners
Matériels et systèmes de navigation et de radiocommunication maritimes –
Interfaces numériques –
Partie 1: Émetteur unique et récepteurs multiples
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 47.020.70 ISBN 978-2-8322-7831-4

– 2 – IEC 61162-1:2024 © IEC 2024
CONTENTS
FOREWORD . 8
INTRODUCTION . 10
1 Scope . 11
2 Normative references . 11
3 Terms and definitions . 11
4 Manufacturer's documentation . 12
5 Hardware specification . 12
5.1 General . 12
5.2 Interconnecting wire . 12
5.3 Conductor definitions . 12
5.4 Electrical connections/shield requirements . 13
5.5 Connector . 13
5.6 Electrical signal characteristics . 13
5.6.1 General . 13
5.6.2 Signal state definitions . 13
5.6.3 Talker drive circuits . 13
5.6.4 Listener receive circuits . 13
5.6.5 Electrical isolation . 14
5.6.6 Maximum voltage on bus . 14
6 Data transmission . 14
7 Data format protocol . 15
7.1 Characters . 15
7.1.1 General . 15
7.1.2 Reserved characters . 15
7.1.3 Valid characters . 15
7.1.4 Undefined characters . 15
7.1.5 Character symbols . 15
7.1.6 Manufacturer's mnemonic code . 15
7.2 Fields . 16
7.2.1 String . 16
7.2.2 Address field . 16
7.2.3 Data fields . 17
7.2.4 Checksum field . 18
7.2.5 Sequential message identifier field . 18
7.3 Sentences . 18
7.3.1 General structure . 18
7.3.2 Description of approved sentences . 18
7.3.3 Parametric sentences . 19
7.3.4 Encapsulation sentences . 20
7.3.5 Query sentences . 22
7.3.6 Proprietary sentences . 23
7.3.7 Command sentences . 23
7.3.8 Valid sentences . 24
7.3.9 Multi-sentence messages . 24
7.3.10 Sentence transmission timing . 24
7.3.11 Additions to approved sentences . 25

IEC 61162-1:2024 © IEC 2024 – 3 –
7.3.12 Message reception timeout for multi-sentence method . 25
7.4 Error detection and handling . 25
7.5 Handling of deprecated sentences . 25
8 Data content . 25
8.1 Character definitions . 25
8.2 Field definitions . 28
8.3 Approved sentences . 31
8.3.1 General format . 31
8.3.2 AAM – Waypoi
...