SIST EN 17326:2020
(Main)Surfaces for sports areas - Determination of dimensional stability of shock pads used within sports systems
Surfaces for sports areas - Determination of dimensional stability of shock pads used within sports systems
This document specifies a method for determining the dimensional stability (bowing and curling) of shock pads used within sports surface systems.
Sportböden - Bestimmung der Dimensionsstabilität von elastifizierenden Schichten in Sportsystemen
Dieses Dokument legt ein Verfahren zur Bestimmung der Dimensionsstabilität (Schüsselung und Wölbung) von elastifizierenden Schichten fest, die in Sportböden verwendet werden.
Sols sportifs - Détermination de la stabilité dimensionnelle des tapis absorbant les chocs dans les systèmes de sols sportifs
Le présent document spécifie une méthode de détermination de la stabilité dimensionnelle (cintrage et incurvation) des tapis absorbant les chocs utilisés dans les systèmes de sols sportifs.
Podloge za športne dejavnosti - Ugotavljanje dimenzijske stabilnosti oblog za blaženje udarcev pri športnih podlogah
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17326:2020
01-julij-2020
Podloge za športne dejavnosti - Ugotavljanje dimenzijske stabilnosti oblog za
blaženje udarcev pri športnih podlogah
Surfaces for sports areas - Determination of dimensional stability of shock pads used
within sports systems
Sportböden - Bestimmung der Dimensionsstabilität von elastifizierenden Schichten in
Sportsystemen
Sols sportifs - Détermination de la stabilité dimensionnelle des tapis absorbant les chocs
dans les systèmes de sols sportifs
Ta slovenski standard je istoveten z: EN 17326:2020
ICS:
97.220.10 Športni objekti Sports facilities
SIST EN 17326:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17326:2020
---------------------- Page: 2 ----------------------
SIST EN 17326:2020
EN 17326
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2020
EUROPÄISCHE NORM
ICS 97.220.10
English Version
Surfaces for sports areas - Determination of dimensional
stability of shock pads used within sports systems
Sols sportifs - Détermination de la stabilité Sportböden - Bestimmung der Dimensionsstabilität
dimensionnelle des tapis absorbant les chocs dans les von elastifizierenden Schichten in Sportsystemen
systèmes de sols sportifs
This European Standard was approved by CEN on 2 March 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17326:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17326:2020
EN 17326:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Apparatus . 4
5 Test specimens . 6
6 Procedure . 6
7 Test report . 7
2
---------------------- Page: 4 ----------------------
SIST EN 17326:2020
EN 17326:2020 (E)
European foreword
This document (EN 17326:2020) has been prepared by Technical Committee CEN/TC 217 “Surfaces for
sports areas”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2020, and co
...
SLOVENSKI STANDARD
oSIST prEN 17326:2019
01-januar-2019
Podloge za športne dejavnosti - Ugotavljanje dimenzijske stabilnosti oblog za
blaženje udarcev pri športnih podlogah
Surfaces for sports areas - Determination of dimensional stability of shock pads used
within sports systems
Sportböden - Bestimmung der Dimensionsstabilität von elastifizierenden Schichten in
Sportsystemen
Sols sportifs - Détermination de la stabilité dimensionnelle des tapis absorbant les chocs
dans les systèmes de sols sportifs
Ta slovenski standard je istoveten z: prEN 17326
ICS:
97.220.10 Športni objekti Sports facilities
oSIST prEN 17326:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17326:2019
---------------------- Page: 2 ----------------------
oSIST prEN 17326:2019
DRAFT
EUROPEAN STANDARD
prEN 17326
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2018
ICS 97.220.10
English Version
Surfaces for sports areas - Determination of dimensional
stability of shock pads used within sports systems
Sols sportifs - Détermination de la stabilité Sportböden - Bestimmung der Dimensionsstabilität
dimensionnelle des tapis absorbant les chocs dans les von elastifizierenden Schichten in Sportsystemen
systèmes de sols sportifs
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 217.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17326:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17326:2019
prEN 17326:2018 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Apparatus . 4
5 Test specimens . 6
6 Procedure .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.