SIST EN 61754-6:1999/A1:2002
(Amendment)Fibre optic connector interfaces -- Part 6: Type MU connector family
Fibre optic connector interfaces -- Part 6: Type MU connector family
EN following parallel vote
Steckgesichter von Lichtwellenleiter-Steckverbindern -- Teil 6: Bauart MU Steckverbinderfamilie
Interfaces de connecteurs pour fibres optiques -- Partie 6: Famille de connecteurs de type MU
Fibre optic connector for interfaces - Part 6: Type MU connector family - Amendment A1 (IEC 61754-6:1997/A1:2001)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61754-6:1999/A1:2002
01-september-2002
Fibre optic connector for interfaces - Part 6: Type MU connector family -
Amendment A1 (IEC 61754-6:1997/A1:2001)
Fibre optic connector interfaces -- Part 6: Type MU connector family
Steckgesichter von Lichtwellenleiter-Steckverbindern -- Teil 6: Bauart MU
Steckverbinderfamilie
Interfaces de connecteurs pour fibres optiques -- Partie 6: Famille de connecteurs de
type MU
Ta slovenski standard je istoveten z: EN 61754-6:1997/A1:2001
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61754-6:1999/A1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61754-6:1999/A1:2002
---------------------- Page: 2 ----------------------
SIST EN 61754-6:1999/A1:2002
EUROPEAN STANDARD EN 61754-6/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2001
ICS 33.180.20
English version
Fibre optic connector interfaces
Part 6: Type MU connector family
(IEC 61754-6:1997/A1:2001)
Interface de connecteurs pour fibres Steckgesichter von Lichtwellenleiter-
optiques Steckverbindern
Partie 6: Famille de connecteurs Teil 6: Bauart MU Steckverbinderfamilie
de type MU (IEC 61754-6:1997/A1:2001)
(CEI 61754-6:1997/A1:2001)
This amendment A1 modifies the European Standard EN 61754-6:1997; it was approved by CENELEC
on 2001-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61754-6:1997/A1:2001 E
---------------------- Page: 3 ----------------------
SIST EN 61754-6:1999/A1:2002
EN 61754-6:1997/A1:2001 - 2 -
Foreword
The text of document 86B/1402/FDIS, future amendment 1 to IEC 61574-6:1997, prepared by
SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to
EN 61754-6:1997 on 2001-07-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-04-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2004-07-01
__________
Endorsement notice
The text of amendment 1:2001 to the International Standard IEC 61754-6:1997 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 61754-6:1999/A1:2002
NORME
CEI
INTERNATIONALE IEC
61754-6
INTERNATIONAL
1997
STANDARD
AMENDEMENT 1
AMENDMENT 1
2001-01
Amendement 1
Interfaces de connecteurs pour fibres optiques –
Partie 6:
Famille de connecteurs de type MU
Amendment 1
Fibre optic connector interfaces –
Part 6:
Type MU connector family
© IEC 2001 Droits de reproduction réservés ⎯ Copyright - all rights reserved
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
L
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 5 ----------------------
SIST EN 61754-6:1999/A1:2002
61754-6 Amend. 1 © IEC:2001 – 3 –
FOREWORD
This amendment has been prepared by subcommittee 86B: Fibre optic interconnecting
devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this amendment is based on the following documents:
FDIS Report on voting
86B/1402/FDIS 86B/1455/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of the base publication and its amendments will
remain unchanged until 2002. At this date, the publication will be
reconfirmed;
withdrawn;
replaced by a revised edition, or
amended.
–––––––––––––––
Page 7
2 Description
Add, at the end of this subclause, the following new text:
This part 6 type MU connector family defines the standard interface dimensions of active
device receptacles for the type MU connectors. The receptacles are used to retain the
connector plugs and mechanically maintain the optical datum target of the plugs at a defined
position within the receptacle housings.
3 Interfaces
Add, at the end of the list of standard interfaces, the following interfaces:
Interface 6-12: Simplex active device receptacle interface – for PC connector plug
Interface 6-13: Duplex active device receptacle interface – for PC connector plug
---------------------- Page: 6 ----------------------
SIST EN 61754-6:1999/A1:2002
61754-6 Amend. 1 © IEC:2001 – 5 –
Page 9
Add, after the two tabular layouts, the following tabular layout:
Plug connectors
Receptacles
Interface 6-1 Interface 6-2
(simplex plug connector) (duplex plug connector)
Interface 6-12 Mate Not mate
(simplex receptacle)
Interface 6-13 Mate Mate
(duplex receptacle)
---------------------- Page: 7 ----------------------
SIST EN 61754-6:1999/A1:2002
61754-6 Amend. 1 © IEC:2001 – 7 –
Page 61
Add, after figure 11, the following new figure:
Z X
I J
K L
AA
M
AB
Optical
AC
O
datum
N
target
Y
A
AD
B
B AG
Alignment feature
A
P
Q
Cross-section A-A
AE
AF
Mechanical stop
a) Rigid bore b) Resilient sleeve
Detail of alignment feature
IEC 2853/2000
Cross-section B-B
Figure 12a – Simplex active device receptacle interface
W
R
V
U
S
D
A
∅
E
F
B
∅
A
∅
AH
---------------------- Page: 8 ----------------------
SIST EN 61754-6:1999/A1:2002
61754-6
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.