SIST EN ISO 13565-1:2000

Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996)

Decribes a filtering method for use with surfaces having stratified functional properties. The surfaces have a relatively small amount of waviness. This filtering method suppresses the valley influence on the reference line such that a more satisfactory line is generated.

Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren; Oberflächen mit plateauartigen funktionsrelevanten Eigenschaften - Teil 1: Filterung und allgemeine Meßbedingungen (ISO 13565-1:1996)

Dieser Teil von ISO 13565 beschreibt ein Filtermethode für Oberflächen mit tiefen Tälern unter einem viel feiner bearbeiteten Plateau mit einem relativ geringen Welligkeitsanteil. Bei Oberflächen dieser Art wird bei Filterung nach ISO 11562 die Referenzlinie durch die Täler unerwünscht beeinflußt. Das in dieser Norm beschriebene besondere Filterverfahren der Filterung unterdrückt den Einfluß der Täler auf die Referenzlinie, so daß eine besser zutreffende Referenzlinie erzeugt wird.

Spécification géométrique des produits (GPS) - Etat de surface: Méthode du profil; surfaces ayant des propriétés fonctionnelles différentes suivant les niveaux - Partie 1: Filtrage et conditions générales de mesurage (ISO 13565-1:1996)

La présente partie de l'ISO 13565 prescrit une méthode de filtrage adaptée à des surfaces ayant des creux profonds sous un plateau dont le fini est plus fin, avec relativement peu d'ondulation. La ligne de référence résultant du filtrage selon l'ISO 11562 est, pour de telles surfaces, influencée d'une façon indésirable par la présence des creux. La procédure de filtrage décrite dans la présente partie de l'ISO 13565 supprime l'influence des creux sur cette ligne de référence, de façon à engendrer une ligne de référence plus satisfaisante.

Specifikacija geometrijskih veličin izdelka - Tekstura površine: profilna metoda - Površine s slojevitimi funkcionalnimi lastnostmi - 1. del: Filtriranje in splošni pogoji merjenja (ISO 13565-1:1996)

General Information

• Status: Published
• Publication Date: 30-Nov-2000
• ICS: 17.040.20 - Properties of surfaces
• ICS: 17.040.40 - Geometrical Product Specification (GPS)
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2000
• Due Date: 01-Dec-2000
• Completion Date: 01-Dec-2000
• Ref Project: EN ISO 13565-1:1997 - Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13565-1:2000
01-december-2000
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND7HNVWXUDSRYUãLQHSURILOQDPHWRGD
3RYUãLQHVVORMHYLWLPLIXQNFLRQDOQLPLODVWQRVWPLGHO)LOWULUDQMHLQVSORãQL
SRJRMLPHUMHQMD,62
Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces
having stratified functional properties - Part 1: Filtering and general measurement
conditions (ISO 13565-1:1996)
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit:
Tastschnittverfahren; Oberflächen mit plateauartigen funktionsrelevanten Eigenschaften
- Teil 1: Filterung und allgemeine Meßbedingungen (ISO 13565-1:1996)
Spécification géométrique des produits (GPS) - Etat de surface: Méthode du profil;
surfaces ayant des propriétés fonctionnelles différentes suivant les niveaux - Partie 1:
Filtrage et conditions générales de mesurage (ISO 13565-1:1996)
Ta slovenski standard je istoveten z: EN ISO 13565-1:1997
ICS:
17.040.20 Lastnosti površin Properties of surfaces
SIST EN ISO 13565-1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13565-1:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 13565-1:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 13565-1:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 13565-1:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 13565-1:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 13565-1:2000
IS0
INTERNATIONAL
13565-1
STANDARD
First edition
1996-l Z-01
Geometrical Product Specifications (GPS)
- Surface texture: Profile method;
Surfaces having stratified functional
properties -
Part 1:
Filtering and general measurement conditions
Spkifica tion g@om&rique des produits (GPS) - &at de surface: M6 thode
du profil; surfaces ayan t des propri&& fonctionnelles diffkren tes suivan t
/es niveaux -
Partie 7: Filtrage et conditions g&&-ales de mesurage
Reference number
IS0 13565:1996(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 13565-1:2000
IS0 13565:1996(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work of
preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 13565-l was prepared jointly by Technical
Committees lSO/TC 57, Metrology and properties of surfaces, Sub-
committee SC 1, Geometrical parameters - lnstruments and procedures
for measurement of surface roughness and waviness, lSO/TC 3, Limits
and fits, and lSO/TC 10, Technical drawings, product definition and related
documentation, Subcommittee SC 5, Dimensioning and tolerancing.
IS0 13565 consists of the following parts, under the general title Geo-
metrical product specifications (G PSI - Surface texture: Profile method;
Surfaces having stratified functional properties:
Part I: Filtering and general measurement conditions
Part 2: Height characterization using the linear material ratio curve
- Part 3: Height characterization using the material probability curve
Annexes A and B of this part of IS0 13565 are for information only.
0 IS0 1996
All rights reserved. Unless otherwise specified, no part of this publication may be
reproduced or utilized in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-121 I Geneve 20 l Switzerland
Printed in Switzerland
II

---------------------- Page: 8 ----------------------

SIST EN ISO 13565-1:2000
0 IS0 IS0 135654:1996(E)
Introduction
This part of IS0 13565 is a Geometrical Product Specification (GPS)
standard and is to be regarded as a General GPS standard (see
lSO/TR 14638). It influences chain links 2 and 3 of the chain of standards
for roughness profile.
For more detailed information of the relation of this standard to other
standards and the GPS matrix model, see annex A.
The roughness profile generated using the filter defined in IS0 11562
suffers some undesirable distortions, when the measured surface consists
of relatively deep valleys beneath a more finely finished plateau with
minimal waviness. This type of surface is very common for example in
cylinder liners for internal combustion engines.
This part of IS0 13565 provides a method of greatly reducing these
distortions, thus enabling the parameters defined in IS0 13565-2 and
IS0 13565-3 to be used for evaluating the above mentioned type of
surface, with minimal influence from these distortions.
III

---------------------- Page: 9 ----------------------

SIST EN ISO 13565-1:2000
This page intentionally left blank

---------------------- Page: 10 ----------------------

SIST EN ISO 13565-1:2000
INTERNATIONAL STANDARD @ IS0 IS0 13565=1:1996(E)
Geometrical Product Specification (GPS) - Surface texture:
Profile method; Surfaces having stratified functional properties -
Part 1:
Filtering and general measurement conditions
1 Scope
This part of IS0 13565 describes a filtering method for use with surfaces that have deep valleys below a more
finely finished plateau with a relatively small amount of waviness. The reference
...