SIST EN ISO 5395-3:2014/A2:2018
(Amendment)Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 2: Cutting means enclosure guards (ISO 5395-3:2013/Amd 2:2017)
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 2: Cutting means enclosure guards (ISO 5395-3:2013/Amd 2:2017)
Gartengeräte - Sicherheitsanforderungen für verbrennungsmotorisch angetriebene Rasenmäher - Teil 3: Rasenmäher mit Fahrersitz mit sitzendem Benutzer, Änderung 2: Schneidwerkzeugabdeckung (ISO 5395-3:2013/Amd 2:2017)
Matériel de jardinage - Exigences de sécurité pour les tondeuses à gazon à moteur à combustion interne - Partie 3: Tondeuses à gazon à conducteur assis - Amendement 2: (ISO 5395-3:2013/Amd 2:2017)
Oprema za nego vrta - Varnostne zahteve za motorne vrtne kosilnice - 3. del: Kosilnice s sedežem za košnjo v sedečem položaju - Dopolnilo A2: Kosilnice z zaprtimi varovali (ISO 5395-3:2013/Amd 2:2017)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 5395-3:2014/A2:2018
01-april-2018
2SUHPD]DQHJRYUWD9DUQRVWQH]DKWHYH]DPRWRUQHYUWQHNRVLOQLFHGHO
.RVLOQLFHVVHGHåHP]DNRãQMRYVHGHþHPSRORåDMX'RSROQLOR$ .RVLOQLFH]
]DSUWLPLYDURYDOL ,62 $PG
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers -
Part 3: Ride-on lawnmowers with seated operator - Amendment 2: Cutting means
enclosure guards (ISO 5395-3:2013/Amd 2:2017)
Gartengeräte - Sicherheitsanforderungen für verbrennungsmotorisch angetriebene
Rasenmäher - Teil 3: Rasenmäher mit Fahrersitz mit sitzendem Benutzer, Änderung 2:
Schneidwerkzeugabdeckung (ISO 5395-3:2013/Amd 2:2017)
Matériel de jardinage - Exigences de sécurité pour les tondeuses à gazon à moteur à
combustion interne - Partie 3: Tondeuses à gazon à conducteur assis - Amendement 2:
(ISO 5395-3:2013/Amd 2:2017)
Ta slovenski standard je istoveten z: EN ISO 5395-3:2013/A2:2018
ICS:
65.060.70 Vrtnarska oprema Horticultural equipment
SIST EN ISO 5395-3:2014/A2:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5395-3:2014/A2:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 5395-3:2014/A2:2018
EN ISO 5395-3:2013/A2
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2018
EUROPÄISCHE NORM
ICS 65.060.70
English Version
Garden equipment - Safety requirements for combustion-
engine-powered lawnmowers - Part 3: Ride-on
lawnmowers with seated operator - Amendment 2: Cutting
means enclosure guards (ISO 5395-3:2013/Amd 2:2017)
Matériel de jardinage - Exigences de sécurité pour les Gartengeräte - Sicherheitsanforderungen für
tondeuses à gazon à moteur à combustion interne - verbrennungsmotorisch angetriebene Rasenmäher -
Partie 3: Tondeuses à gazon à conducteur assis - Teil 3: Rasenmäher mit Fahrersitz mit sitzendem
Amendement 2: Enceintes de protection des organes Benutzer, Änderung 2: Schneidwerkzeugabdeckung
de coupe (ISO 5395-3:2013/Amd 2:2017) (ISO 5395-3:2013/Amd 2:2017)
This amendment A2 modifies the European Standard EN ISO 5395-3:2013; it was approved by CEN on 8 March 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5395-3:2013/A2:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5395-3:2014/A2:2018
EN ISO 5395-3:2013/A2:2018 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European standard and the Essential
Requirements of EU Directive 2006/42/EC amended by Directive 2009/127/EC
aimed to be covered . 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5395-3:2014/A2:2018
EN ISO 5395-3:2013/A2:2018
European foreword
This document (EN ISO 5395-3:2013/A2:2018) has been prepared by Technical Committee ISO/TC 23
“Tractors and machinery for agriculture and forestry” in collaboration with Technical Committee
CEN/TC 144 “Tractors and machinery for agriculture and forestry” the secretariat of which is held by
AFNOR.
This Amendment to the European standard EN ISO 5395-3:2013 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by August 2018, and
conflicting national standards shall be withdrawn at the latest by August 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 5395-3:2013/A2:2017 has been approved by CEN as EN ISO 5395-3:2013/A2:2018
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 5395-3:2014/A2:2018
EN ISO 5395-3:2013/A2:2018 (E)
Annex ZA
(informative)
Relationship between this European standard and the Essential
Requirements of EU Directive 2006/42/EC amended by Directive
2009/127/EC aimed to be covered
This European standard has been prepared under Commission’s standardization request M/396
mandate to CEN and CENELEC for standardisation in the field of machinery to provide one voluntary
means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC of the
European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive
95/16/EC (recast) amended by Directive 2009/127/EC of the European Parliament and of the Council
of 21 October 2009 amending Directive 2006/42/EC with regard to machinery for pesticide application
(Text with EEA relevance).
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard confers, within the limits of the scope of this
standard, a presumption of conformity with the corresponding Essential Requirements of that Directive
and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
Table ZA.1 — Correspondence between this European standard and EU Directive 2006/42/EC
amended by Directive 2009/127/EC
Essential Requirements Clause(s)/subclause(s) of Remarks/Notes
of Directive 2006/42/EC this EN
All relevant Essential All normative 1) For the purpose of
Requirements clauses/subclauses compliance with 4 5.1, of
including 4.5.1 and 7.1.2. this document, 4.5.1 (c) is
not sufficient to achieve
presumption of conformity
for side discharge
openings.
2) Compliance with EN ISO
5395-1 and EN ISO 5395-3
is required to achieve
presumption of conformity.
4
---------------------- Page: 6 ----------------------
SIST EN ISO 5395-3:2014/A2:2018
INTERNATIONAL ISO
STANDARD 5395-3
Second edition
2013-09-01
AMENDMENT 1
2017-02-01
Corrected version
2017-03
Garden equipment — Safety
requirements for combustion-engine-
powered lawnmowers —
Part 3:
Ride-on lawnmowers with seated
operator
AMENDMENT 1: OPC, Parking brake,
ROPS, pressurized hoses, cutting means,
grass catcher and test probe
Matériel de jardinage — Exigences de sécurité pour les tondeuses à
gazon à moteur à combustion interne —
Partie 3: Tondeuses à gazon à conducteur assis
AMENDEMENT 1: OPC, frein de stationnement, ROPS, tuyaux sous
pression, organes de coupe, bac de ramassage et gabarit d’essai
Reference number
ISO 5395-3:2013/Amd.1:2017(E)
©
ISO 2017
---------------------- Page: 7 ----------------------
SIST EN ISO 5395-3:2014/A2:2018
ISO 5395-3:2013/Amd.1:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.