Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:1994)

This part of EN 20105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to immersion in water.

Textilien - Farbechtheitsprüfungen - Teil E01: Farbechtheit gegen Wasser (ISO 105-E01:1994)

Dieser Teil der ISO 105 beschreibt ein Prüfverfahren zur Bestimmung der Widerstandsfähigkeit der Farbe von Textilien aller Art und in allen Verarbeitungßuständen gegen das Eintauchen in Wasser.

Textiles - Essais de solidité des teintures - Partie E01: Solidité des teintures a l'eau (ISO 105-E01:1994)

Tekstilije - Preskušanje barvne obstojnosti - Del E01: Barvna obstojnost proti vodi (ISO 105-E01:1994)

General Information

Status
Withdrawn
Publication Date
28-Feb-1999
Withdrawal Date
02-May-2016
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
25-Apr-2016
Due Date
18-May-2016
Completion Date
03-May-2016

Relations

Buy Standard

Standard
EN ISO 105-E01:1999
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 105-E01:1999
01-marec-1999
Tekstilije - Preskušanje barvne obstojnosti - Del E01: Barvna obstojnost proti vodi
(ISO 105-E01:1994)
Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-
E01:1994)
Textilien - Farbechtheitsprüfungen - Teil E01: Farbechtheit gegen Wasser (ISO 105-
E01:1994)
Textiles - Essais de solidité des teintures - Partie E01: Solidité des teintures a l'eau (ISO
105-E01:1994)
Ta slovenski standard je istoveten z: EN ISO 105-E01:1996
ICS:
59.080.01 Tekstilije na splošno Textiles in general
SIST EN ISO 105-E01:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 105-E01:1999

---------------------- Page: 2 ----------------------

SIST EN ISO 105-E01:1999

---------------------- Page: 3 ----------------------

SIST EN ISO 105-E01:1999

---------------------- Page: 4 ----------------------

SIST EN ISO 105-E01:1999

---------------------- Page: 5 ----------------------

SIST EN ISO 105-E01:1999

---------------------- Page: 6 ----------------------

SIST EN ISO 105-E01:1999
INTERNATIONAL
ISO
STANDARD
105-EO1
Fourth edition
1994-09-01
Textiles
- Tests for colour fastness -
Part EOI:
Colour fastness to water
Textiles
- Essais de solidite des teintures -
Partie EO 1: Solidite des teintures 21 I ’eau
Reference number
ISO 105-EO1 :1994(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 105-E01:1999
ISO 105-E01:1994(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 105-EO1 was prepared by Technicai Committee
ISO/TC 38, Textiles, Subcommittee SC 1, Tests for coloured textiles and
coloran ts.
This fourth edition cancels and replaces the third edition
(ISO 105-EO1 :1989), of which it constitutes a technical revision.
ISO 105 was previously published in 13 “‘parts ”, each designated by a
letter (e.g. “Part A ”), with publication dates between 1978 and 1985. Esch
part contained a series of “sections ”, each designated by the respective
part letter and by a two-digit serial number (e.g. “Section AO1 “). These
sections are now being republished as separate documents, themselves
designated “Parts” but retaining their earlier alphanumeric designations.
A complete list of these Parts is given in ISO 105-AOI.
0 ISO 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or- utilized in any form or by any means, eiectronic or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in SwitzerIand

---------------------- Page: 8 ----------------------

SIST EN ISO 105-E01:1999
INTERNATIONAL STANDARD 0 ISO ISO 105-E01:1994(E)
Textiles - Tests for colour fastness -
Part EOI:
Colour fastness to water
1 Scope 3 Principle
A specimen of the textile in contact with one or two
This part of ISO 105 specifies a method for deter-
specified adjacent fabrics is immersed in water,
mining the resistance of the colour of textiles of all
drained and placed between two plates under a
kinds and in all forms to immersion in water.
specified pressure in a test device. The specimen and
the adjacent fabric(s) are dried. The Change in colour
of the specimen and the staining of the adjacent
fabric(s) are assessed by comparison with the grey
scales.
2 Normative references
The following Standards contain provisions which,
4 Apparatus and reagent
through reference in this text, constitute provisions
of this part of ISO 105. At the time of publication, the
editions indicated were valid. All Standards are subject 4.1 Test device, consisting of a frame of stainless
to revision, and Parties to agreements based on this steel into which a weight-piece of mass approximately
part of ISO 105 are encouraged to investigate the 5 kg and base of 60 mm x 115 mm is closely fitted,
possibility of applying the most recent editions of the so that a pressure of 12,5 kPa tan be applied on test
Standards indicated below. Members of IEC and ISO specimens measuring 40 mm x 100 mm placed be-
maintain registers of currently valid Internation
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.