Universal Personal Telecommunication (UPT); UPT phase 2; Functional specification of the interface of a UPT Integrated Circuit Card (ICC) and Public Switched Telephone Network (PSTN), Integrated Services Digital Network (ISDN) and Global System for Mobile communications (GSM) terminals (one pass and multiple pass authentication); Conformance test specification

This EN specifies the Conformance Testing part of ETS 300 823.

Svetovne osebne telekomunikacije (UPT) – UPT, faza 2 – Funkcijska specifikacija vmesnika čipovne kartice (ICC) sistema UPT ter terminalov javnega komutiranega telefonskega omrežja (PSTN), digitalnega omrežja z integriranimi storitvami (ISDN) in globalnega sistema mobilnih komunikacij (GSM) (enkratna in večkratna avtentikacija) – Specifikacija za preskušanje skladnosti

General Information

Status
Published
Publication Date
30-Nov-2003
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003

Buy Standard

Standard
SIST EN 301 363 V1.1.2:2003
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.NUDWQDUniversal Personal Telecommunication (UPT); UPT phase 2; Functional specification of the interface of a UPT Integrated Circuit Card (ICC) and Public Switched Telephone Network (PSTN), Integrated Services Digital Network (ISDN) and Global System for Mobile communications (GSM) terminals (one pass and multiple pass authentication); Conformance test specification33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)33.070.50Globalni sistem za mobilno telekomunikacijo (GSM)Global System for Mobile Communication (GSM)33.040.35Telefonska omrežjaTelephone networksICS:Ta slovenski standard je istoveten z:EN 301 363 Version 1.1.2SIST EN 301 363 V1.1.2:2003en01-december-2003SIST EN 301 363 V1.1.2:2003SLOVENSKI

STANDARD
SIST EN 301 363 V1.1.2:2003

EN 301 363 V1.1.2 (1999-05)European Standard (Telecommunications series)Universal Personal Telecommunication (UPT);UPT phase 2;Functional specification of the interface of a UPTIntegrated Circuit Card (ICC) andPublic Switched Telephone Network (PSTN),Integrated Services Digital Network (ISDN) andGlobal System for Mobile communications (GSM) terminals(one pass and multiple pass authentication);Conformance test specificationSIST EN 301 363 V1.1.2:2003

ETSIETSI EN 301 363 V1.1.2 (1999-05)2ReferenceDEN/NA-064011 (cmc00idc.PDF)Keywordscard, GSM, ISDN, UPTETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00

Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frIndividual copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgIf you find errors in the present document, send yourcomment to: editor@etsi.frCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1999.All rights reserved.SIST EN 301 363 V1.1.2:2003

ETSIETSI EN 301 363 V1.1.2 (1999-05)3ContentsIntellectual Property Rights...............................................................................................................................5Foreword............................................................................................................................................................51Scope........................................................................................................................................................62References...............................................................................................................................................63Definitions, symbols and abbreviations...................................................................................................63.1Definitions.........................................................................................................................................................63.2Symbols.............................................................................................................................................................63.3Abbreviations.....................................................................................................................................................74UPT Integrated Circuit Card part............................................................................................................74.1Test environment...............................................................................................................................................74.2Test group hierarchy..........................................................................................................................................74.3Test procedure...................................................................................................................................................74.3.1Physical characteristics................................................................................................................................74.3.2Electronic signals and transmission protocols..............................................................................................74.3.3Logical model...............................................................................................................................................74.3.4Security services and facilities.....................................................................................................................84.3.4.1.4Method of test...................................................................................................................................84.3.4.1.5Test requirement...............................................................................................................................84.3.5Description of the functions.........................................................................................................................94.3.5.1SELECT function...................................................................................................................................94.3.5.2READ BINARY function.......................................................................................................................94.3.5.3UPDATE BINARY function..................................................................................................................94.3.5.3.4Method of test...................................................................................................................................94.3.5.3.5Test requirement.............................................................................................................................104.3.5.4READ RECORD function....................................................................................................................104.3.5.5UPDATE RECORD function...............................................................................................................104.3.5.6SEEK function......................................................................................................................................114.3.5.7VERIFY CHV function........................................................................................................................114.3.5.8CHANGE CHV function......................................................................................................................114.3.5.9UNBLOCK CHV function...................................................................................................................114.3.5.10INTERNAL AUTHENTICATION function........................................................................................114.3.5.10.4Method of test.................................................................................................................................124.3.5.10.5Test requirement.............................................................................................................................124.3.6Description of the commands.....................................................................................................................124.3.6.3.1SELECT command.........................................................................................................................134.3.7Contents of the EFs....................................................................................................................................164.3.7.3Contents of the EFs at the UPT application level.................................................................................164.3.7.3.1Definition and applicability.............................................................................................................164.3.7.3.2Conformance requirement...............................................................................................................174.3.7.3.3Test purpose....................................................................................................................................174.3.7.3.4Method of test.................................................................................................................................184.3.7.3.5Test requirement.............................................................................................................................185UPT Card Accepting Device part..........................................................................................................185.1Test environment.............................................................................................................................................185.1.1.2Network item........................................................................................................................................185.2Test group hierarchy........................................................................................................................................195.3Test procedure.................................................................................................................................................195.3.1Physical characteristics..............................................................................................................................195.3.2Electrical tests............................................................................................................................................195.3.3Low level protocol tests.............................................................................................................................195.3.4Application protocol..................................................................................................................................195.3.4.4.1Two pass strong authentication.......................................................................................................19SIST EN 301 363 V1.1.2:2003

ETSIETSI EN 301 363 V1.1.2 (1999-05)46List of Test Procedure Reference..........................................................................................................21History..............................................................................................................................................................22SIST EN 301 363 V1.1.2:2003

ETSIETSI EN 301 363 V1.1.2 (1999-05)5Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee NetworkAspects (NA).National transposition datesDate of adoption of this EN:16 April 1999Date of latest announcement of this EN (doa):31 July 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 January 2000Date of withdrawal of any conflicting National Standard (dow):31 January 2000SIST EN 301 363 V1.1.2:2003

ETSIETSI EN 301 363 V1.1.2 (1999-05)61ScopeThe present document provides the test specification for the Universal Personal Telecommunication (UPT) card and theCard Accepting Device (CAD) defined in ETS 300 823 [1].2ReferencesThe following documents contain provisions which, through reference in this text, constitute provisions of the presentdocument.· References are either specific (identified by date of publication, edition number, version number, etc.) ornon-specific.· For a specific reference, subsequent revisions do not apply.· For a non-specific reference, the latest version applies.· A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]ETS 300 823 (1997): "Universal Personal Telecommunication (UPT); UPT phase 2; Functionalspecification of the interface of a UPT Integrated Circuit Card (ICC) and Public SwitchedTelephone Network (PSTN), Integrated Services Digital Network (ISDN) and Global System forMobile Communications (GSM) terminals (one pass and multiple pass authentication)".[2]EN 301 366: "Universal Personal Telecommunication (UPT); UPT phase 2; Functionalspecification of the interface of a UPT Integrated Circuit Card (ICC) and Card Accepting Devices(CAD); UPT card accepting Dual Tone Multiple Frequency (DTMF) device; Conformance testspecification".[3]ISO 8859-1 (1998): "Information technology; 8-bit single-byte coded graphic character sets;Part 1: Latin alphabet No. 1".3Definitions, symbols and abbreviations3.1DefinitionsFor the purposes of the present document, the following definitions in addition to the terms defined in ETS 300 823 [1]apply:Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or systemclaimed to conform to a given specification, stating which capabilities have been implemented. The ICS can take severalforms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc.ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or systembecomes an ICS.3.2SymbolsFor the purposes of the present document, the symbols of EN 301 366 [2] apply.SIST EN 301 363 V1.1.2:2003

ETSIETSI EN 301 363 V1.1.2 (1999-05)73.3AbbreviationsFor the purposes of the present document the following abbreviation in addition to the abbreviations of EN 301 366 [2]apply:RANDRandom challenge sent by the network to be used for authentication.4UPT Integrated Circuit Card part4.1Test environmentFor this subclause, the same text as in EN 301 366 [2] is valid with the following modifications:-"PIM" is replaced by "PIM2";-in subclause 4.4 "DFUPT" is replaced by "DFUPT2".4.2Test group hierarchyFor this subclause, the same text as in EN 301 366 [2] is valid with the following modifications:-"ETS 300 477" is replaced by "ETS 300 823 [1]";-"PIM" is replaced by "PIM2".4.3Test procedureFor this subclause, the same text as in EN 301 366 [2] is valid.4.3.1Physical characteristicsFor this subclause, the same text as in EN 301 366 [2] is valid with the following modifications:-"ETS 300 477" is replaced by "ETS 300 823 [1]";-"PIM" is replaced by "PIM2".4.3.2Electronic signals and transmission protocolsFor this subclause, the same text as in EN 301 366 [2] is valid with the following modifications:-"ETS 300 477" is replaced by "ETS 300 823 [1]";-"PIM" is replaced by "PIM2".4.3.3Logical modelFor this subclause, the same text as in EN 301 366 [2] is valid with the following modifications:-"ETS 300 477" is replaced by "ETS 300 823 [1]";-"PIM" is replaced by "PIM2";-in subclauses 4.3.3.2 and 4.3.3.4 "DFUPT" is replaced by "DFUPT2";-in subclause 4.3.3.4.2 "EFSEQ" is deleted.SIST EN 301 363 V1.1.2:2003

ETSIETSI EN 301 363 V1.1.2 (1999-05)84.3.4Security services and facilitiesFor this subclause, the same text as in EN 301 366 [2] is valid with the following modifications:-"ETS 300 477" is replaced by "ETS 300 823 [1]";-"PIM" is replaced by "PIM2";-"DFUPT" is replaced by "DFUPT2";-the subclauses 4.3.4.1.4 and 4.3.4.1.5 are replaced by the following ones:4.3.4.1.4Method of testInitial conditions:1)the PIM is connected to a CAD simulator;2)CHV1 on the PIM is set to '0000';3)three VERIFY CHV1 attempts and ten UNBLOCK CHV1 attempts remain.Test procedure:a)the CAD simulator resets the PIM;b)the CAD simulator selects DFUPT as defined in subclause 4.4;c)the CAD simulator sends a VERIFY CHV command with incorrect CHV1 '1111' to the PIM;d)the CAD simulator sends VERIFY CHV command with incorrect CHV1 '1111' to the PIM;e)the CAD simulator sends VERIFY CHV command with incorrect CHV1 '1111' to the PIM;f)the CAD simulator sends a SELECT command to the PIM to select EFCT;g)the CAD simulator sends a READ BINARY;h)the CAD simulator sends a SELECT command to the PIM to select EFPUI;i)the CAD simulator sends a READ BINARY;j)the CAD simulator sends a INTERNAL AUTHENTICATION command to the PIM containing the number'12345678';k)the CAD simulator sends a VERIFY CHV command with correct CHV1 '0000' to the PIM;l)the CAD simulator sends a SELECT command to the PIM to select EFCHV1;m)the CAD simulator sends an UNBLOCK CHV command to the PIM;n)the CAD simulator sends a VERIFY CHV command with correct CHV1 '0000' to the PIM.4.3.4.1.5Test requirement1)After step e) the status condition returned by the PIM shall be SW1='98', SW2='40' - unsuccessful CHVverification, verify CHV mechanism no longer possible.2)After steps g), i) and j) the status condition returned by the PIM shall be SW1='98', SW2='04' - access conditionnot fulfilled.3)After step k) the status condition returned by the PIM shall be SW1='98', SW2='40' - CHV blocked.SIST EN 301 363 V1.1.2:2003

ETSIETSI EN 301 363 V1.1.2 (1999-05)94.3.5Description of the functionsFor this subclause, the same text as in EN 301 366 [2] is valid.4.3.5.1SELECT functionFor this subclause, the same text as in EN 301 366 [2] is valid with the following modifications:-"ETS 300 477" is replaced by "ETS 300 823 [1]";-"PIM" is replaced by "PIM2";-"DFUPT" is replaced by "DFUPT2";-in subclause 6.5.10.4, m) "EFSEQ" is deleted.4.3.5.2READ BINARY functionFor this subclause, the same text as in EN 301 366 [2] is valid with the following modifications:-"ETS 300 477" is replaced by "ETS 300 823 [1]";-"PIM" is replaced by "PIM2";-"DFUPT" is replaced by "DFUPT2".4.3.5.3UPDATE BINARY functionFor this subclause, the same text as in EN 301 366 [2] is valid with the following modifications:-"ETS 300 477" is replaced by "ETS 300 823 [1]";-"PIM" is replaced by "PIM2";-"DFUPT" is replaced by "DFUPT2";-the subclauses 4.3.5.3.4 and 4.3.5.3.5 are replaced by the following ones:4.3.5.3.4Method of testInitial conditions:1)the PIM is connected to a CAD simulator;2)EFTV contains the data string: '11 22';3)CHV1 is enabled.SIST EN 301 363 V1.1.2:2003

ETSIETSI EN 301 363 V1.1.2 (1999-05)10Test procedure:a)the CAD simulator resets the PIM;b)the CAD simulator sends SELECT commands to the PIM to select EFTV under DFUPT;c)the CAD simulator sends an UPDATE BINARY command using a length of 1 byte, and data string '33' to thePIM;d)the CAD simulator sends a READ BINARY command to the PIM using a length of 1 byte and an offset of'00 00';e)the CAD simulator sends a VERIFY CHV command to the PIM;f)the CAD simulator sends an UPDATE BINARY command using a length of 1 byte, and data string '33' to thePIM;g)

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.