SIST EN 60745-2-3:2011/A11:2014

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

This standard applies to grinders, polishers and disk-type sanders, including angle, straight and vertical tools, with a rated capacity not exceeding 230 mm. For grinders, the rated speed does not exceed a peripheral speed of the accessory of 80 m/s at rated capacity. This standard does not apply to dedicated cut-off machines which are covered by IEC 60745-2-22. This standard does not apply to random-orbit polishers and random-orbit sanders which are covered by IEC 60745-2-4.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-3: Besondere Anforderungen für Schleifer, Polierer und Schleifer mit Schleifblatt

Outils électroportatifs à moteur - Sécurité - Partie 2-3: Règles particulières pour les meuleuses, lustreuses et ponceuses du type à disque

Električna ročna orodja - Varnost - 2-3. del: Posebne zahteve za brusilnike, polirnike in diskovne brusilnike - Dopolnilo A11

Ta standard velja za brusilnike z nazivno hitrostjo, ki ne presega obodne hitrosti dodatka 80 m/s pri nazivni moči, polirnike in diskovne peskalnike, vključno s kotnimi, ravnimi in navpičnimi. Ta standard velja za orodja z nazivno močjo, ki ne presega 230 mm.

General Information

• Status: Published
• Publication Date: 03-Jul-2014
• ICS: 25.080.50 - Grinding and polishing machines
• ICS: 25.140.20 - Electric tools
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 16-Jun-2014
• Due Date: 21-Aug-2014
• Completion Date: 04-Jul-2014
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: EN 60745-2-3:2011/A11:2014 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

Relations

• Amends: SIST EN 60745-2-3:2011 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006, modified + A1:2010, modified + A1:2010/corrigendum Feb. 2011)
• Effective Date: 28-Jan-2023
• Amends: SIST EN 60745-2-3:2011 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006, modified + A1:2010, modified + A1:2010/corrigendum Feb. 2011)
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-3:2011/A11:2014
01-september-2014
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DEUXVLOQLNH
SROLUQLNHLQGLVNRYQHEUXVLOQLNH'RSROQLOR$
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for
grinders, polishers and disk-type sanders
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-3: Besondere
Anforderungen für Schleifer, Polierer und Schleifer mit Schleifblatt
Outils électroportatifs à moteur - Sécurité - Partie 2-3: Règles particulières pour les
meuleuses, lustreuses et ponceuses du type à disque
Ta slovenski standard je istoveten z: EN 60745-2-3:2011/A11:2014
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-3:2011/A11:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60745-2-3:2011/A11:2014

---------------------- Page: 2 ----------------------

SIST EN 60745-2-3:2011/A11:2014


EUROPEAN STANDARD EN 60745-2-3:2011/A11

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2014
ICS 25.140.20

English Version
Hand-held motor-operated electric tools - Safety - Part 2-3:
Particular requirements for grinders, polishers and disk-type
sanders
Outils électroportatifs à moteur - Sécurité - Partie 2-3: Handgeführte motorbetriebene Elektrowerkzeuge -
Règles particulières pour les meuleuses, lustreuses et Sicherheit - Teil 2-3: Besondere Anforderungen für
ponceuses du type à disque Schleifer, Polierer und Schleifer mit Schleifblatt
This amendment A11 modifies the European Standard EN 60745-2-3:2011; it was approved by CENELEC on 2014-04-21. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committe
...