SIST EN 60034-5:1999

Rotating electrical machines -- Part 5: Classification of degrees of protection provided by enclosures for rotating machinery

Describes definitions for standard degrees of protection provided by enclosures; protection of machines against harmful effects due to the ingress of water; designation for these protective degrees, and tests to verify that the machines meet the requirements.

Drehende elektrische Maschinen -- Teil 5: Einteilung der Schutzarten durch Gehäuse für umlaufende Maschinen

Machines électriques tournantes -- Partie 5: Classification des degrés de protection procurés par les enveloppes des machines tournantes

Décrit: - les définitions des degrés de protection nomaux procurés par les enveloppes - la protection des machines contre les effets nuisibles dus à la pénétration d'eau - les symboles indiquant ces degrés de protection, et - les essais à effectuer en vue de vérifier que les machines satisfont aux prescriptions.

Rotating electrical machines - Part 5: Classification of degrees of protection provided by enclosures for rotating machinery (IEC 60034-5:1981 (Modified))

General Information

• Status: Withdrawn
• Publication Date: 31-May-1999
• Withdrawal Date: 26-Oct-2008
• ICS: 29.160.01 - Rotating machinery in general
• Technical Committee: ERS - Rotating machinery
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 21-Oct-2008
• Due Date: 13-Nov-2008
• Completion Date: 27-Oct-2008
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: EN 60034-5:1986 - Rotating electrical machines - Part 5: Classification of degrees of protection provided by enclosures for rotating machinery

Relations

• Replaced By: SIST EN 60034-5:2002 - Rotating electrical machines -- Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
• Effective Date: 01-Mar-2007

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rotating electrical machines - Part 5: Classification of degrees of protection provided by enclosures for rotating machinery (IEC 60034-5:1981 (Modified))Drehende elektrische Maschinen -- Teil 5: Einteilung der Schutzarten durch Gehäuse für umlaufende MaschinenMachines électriques tournantes -- Partie 5: Classification des degrés de protection procurés par les enveloppes des machines tournantesRotating electrical machines -- Part 5: Classification of degrees of protection provided by enclosures for rotating machinery29.160.01Rotacijski stroji na splošnoRotating
...