iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ETS 300 424 E1:2006

(Main)

Satellite Earth Stations and Systems (SES); Network Control Facilities (NCF) for Land Mobile Earth Stations (LMES) operating in the 1,5/1,6 GHz bands providing voice and/or data communications

Satellite Earth Stations and Systems (SES); Network Control Facilities (NCF) for Land Mobile Earth Stations (LMES) operating in the 1,5/1,6 GHz bands providing voice and/or data communications

This European Telecommunication Standard (ETS) provides specifications for the standardization of the characteristics of the minimum required Network Control Facilities (NCFs) for Mobile Earth Stations (MESs) with both transmit and receive capabilities in order to ensure that the network operator is able to suppress and enable the transmissions from the MESs. In particular, these facilities will permit to stop certain interference situations resulting from the emissions from the MESs. This ETS defines specifications for the control facilities in an MES network operating voice and/or data communications, as defined in ETS 300 423 [1]. This ETS deals with specifications defined, in order to protect other users of the frequency spectrum from unacceptable interference.

Satelitske zemeljske postaje in sistemi (SES) – Naprave za krmiljenje omrežja (NCF) kopenskih mobilnih zemeljskih postaj (LMES), ki delujejo v pasovih 1,5/1,6 GHz, za zagotavljanje govornih oziroma podatkovnih komunikacij

General Information

Status
Published
Publication Date
31-Jan-2006
ICS
33.060.30 - Radio relay and fixed satellite communications systems
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2006
Due Date
01-Feb-2006
Completion Date
01-Feb-2006
Ref Project
ETSI ETS 300 424 ed.1 (1995-08) - Satellite Earth Stations and Systems (SES); Network Control Facilities (NCF) for Land Mobile Earth Stations (LMES) operating in the 1,5/1,6 GHz bands providing voice and/or data communications

Buy Standard

ETS 300 424 E1:2006ETS 300 424 E1:2006
PreviousNext
Standard
ETS 300 424 E1:2006
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 424 E1:2006
01-februar-2006
Satelitske zemeljske postaje in sistemi (SES) – Naprave za krmiljenje omrežja
(NCF) kopenskih mobilnih zemeljskih postaj (LMES), ki delujejo v pasovih 1,5/1,6
GHz, za zagotavljanje govornih oziroma podatkovnih komunikacij
Satellite Earth Stations and Systems (SES); Network Control Facilities (NCF) for Land
Mobile Earth Stations (LMES) operating in the 1,5/1,6 GHz bands providing voice and/or
data communications
Ta slovenski standard je istoveten z: ETS 300 424 Edition 1
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
SIST ETS 300 424 E1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 424 E1:2006

---------------------- Page: 2 ----------------------

SIST ETS 300 424 E1:2006
EUROPEAN ETS 300 424
TELECOMMUNICATION August 1995
STANDARD
Source: ETSI TC-SES Reference: DE/SES-05013
ICS: 33.060.20
NCF, LMES, voice, data
Key words:
Satellite Earth Stations and Systems (SES);
Network Control Facilities (NCFs) for
Land Mobile Earth Stations (LMESs)
operating in the 1,5/1,6 GHz bands providing
voice and/or data communications
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - secretariat@etsi.fr
X.400: Internet:
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1995. All rights reserved.
New presentation - see History box

---------------------- Page: 3 ----------------------

SIST ETS 300 424 E1:2006
Page 2
ETS 300 424: August 1995
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 424 E1:2006
Page 3
ETS 300 424: August 1995
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Abbreviations.7
4 Test report.7
5 Suppression of MES transmissions .7
6 Enabling of MES transmissions .8
History.9

---------------------- Page: 5 ----------------------

SIST ETS 300 424 E1:2006
Page 4
ETS 300 424: August 1995
Blank page

---------------------- Page: 6 ----------------------

SIST ETS 300 424 E1:2006
Page 5
ETS 300 424: August 1995
Foreword
This European Telecommunication Standard (ETS) has been produced by the Satellite Earth Stations and
Systems (SES) Technical Committee of the European Telecommunications Standards Institute (ETSI).
Transposition dates
Date of adoption of this ETS: 29 June 1995
Date of latest announcement of this ETS (doa): 30 November 1995
Date of latest publication of new National Standa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 301 443 V1.3.1:2006(Main)
Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive
ETSI EN 301 443 V1.3.1 (2006-02)

The present document applies to any Very Small Aperture Terminal (VSAT) which has the following characteristics:
the VSAT is operating in one or more frequency ranges within the following bands allocated to the Fixed Satellite Service (FSS), shared with other services, e.g. the Fixed Service (FS) and the Mobile Service (MS):
- 5,850 GHz to 7,075 GHz (earth-to-space);
- 3,400 GHz to 4,200 GHz (space-to-earth);
the VSAT uses linear or circular polarization;
the VSAT operates through a geostationary satellite at least 3° away from any other geostationary satellite operating in the same frequency band and covering the same area;
the VSAT antenna diameter does not exceed 7,3 m, or equivalent effective area;
the VSAT is either:
- a transmit-only VSAT: designed for transmission-only of radio-communications signals in the frequency band (earth-to-space) specified above; or
- a transmit-and-receive VSAT: designed for transmission-and-reception of radio-communications signals
in the frequency bands specified above; or
- a receive-only VSAT: designed for reception-only of radio-communications signals in the frequency
band (space-to-earth) specified above;
the VSAT is designed usually for unattended operation;
the VSAT is operating as part of a satellite network (e.g. star, mesh or point-to-point) used for the distribution
and/or exchange of information between users;
the transmit-only and transmit-and-receive VSAT is controlled and monitored by a Centralized Control andMonitoring Function (CCMF). The CCMF is outside the scope of the present document.
The present document applies to the VSAT with its ancillary equipment and its various terrestrial ports, and when operated within the boundary limits of the operational environmental profile declared by the applicant and when installed as required by the applicant by declaration or in the user documentation. The present document is intended to cover the provisions of Directive 1999/5/EC (R&TTE Directive) [1] article 3.2, which states that "... radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 428 V1.3.1:2006(Main)
Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive
ETSI EN 301 428 V1.3.1 (2006-02)

The present document applies to Very Small Aperture Terminals (VSATs) which have the following characteristics:
The VSAT is operating in one or more frequency ranges in the part of the following bands allocated
exclusively to the Fixed Satellite Services (FSS):
- 14,00 GHz to 14,25 GHz (earth-to-space);
- 12,50 GHz to 12,75 GHz (space-to-earth);
or in the shared parts of the following bands, allocated to the FSS and Fixed Services (FS):
- 14,25 GHz to 14,50 GHz (earth-to-space);
- 10,70 GHz to 11,70 GHz (space-to-earth).
The VSAT uses linear polarization.
The VSAT operates through a geostationary satellite at least 3° away from any other geostationary satellite operating in the same frequency band and covering the same area.
The VSAT antenna diameter does not exceed 3,8 m, or equivalent effective area.
The VSAT is either:
- a transmit only VSAT: designed for transmission only of radio-communications signals in any of the
frequency bands (earth-to-space) specified above; or
- a transmit and receive VSAT: designed for transmission and reception of radio-communications signals in any of the frequency bands specified above; or
- a receive only VSAT: designed for reception only of radio-communications signals in any of the
frequency bands (space-earth) specified above.
The VSAT is designed usually for unattended operation.
The VSAT is operating as part of a satellite network (e.g. star, mesh or point-to-point) used for the distribution and/or exchange of information between users.
The transmit-only and transmit-and-receive VSAT is controlled and monitored by a Centralized Control and Monitoring Function (CCMF). The CCMF is outside the scope of the present document.
The present document applies to the VSAT with its ancillary equipment and its various terrestrial ports, and when operated within the boundary limits of the operational environmental profile declared by the applicant and when installed as required by the applicant by declaration or in the user documentation. The present document is intended to cover the provisions of Directive 1999/5/EC (R&TTE Directive) [1], Article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of Article 3 of the Directive 1999/5/EC (R&TTE Directive) [1] may apply to equipment within the scope of the present document.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 360 V1.2.1:2006(Main)
Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards geostationary satellites in the 27,5 GHz to 29,5 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive
ETSI EN 301 360 V1.2.1 (2006-02)

The present document applies to Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) operating as part of a bi-directional satellite network. Satellite Terminal (ST) is used in the present document as a generic name that refers equally to a SIT and/or a SUT. In such a network a Network Control Facility (NCF) is responsible for the monitoring and control of the transmit functions of the STs. These STs have the following characteristics:
in the case of SITs reception is in the Fixed Satellite Service (FSS) frequency ranges from 10,70 GHz to 11,70 GHz and from 12,50 GHz to 12,75 GHz as well as the Broadcast Satellite Service (BSS) frequency range from 11,70 GHz to 12,50 GHz;
in the case of SUTs reception is in the Fixed Satellite Service (FSS) frequency ranges from 19,70 GHz to 20,20 GHz and from 17,70 GHz to 19,70 GHz as well as the Broadcast Satellite Service (BSS) frequency range from 21,40 GHz to 22,00 GHz;
in all cases ST transmission is in the frequency band allocated to FSS from 27,50 GHz to 29,50 GHz;
STs transmit towards geostationary satellites with spacing down to 2° away from any other geostationary satellite operating in the same frequency band and covering the same area;
linear or circular polarization is used for transmission or reception;
the received signals may be analogue and/or digital;
the transmitted signals are always of digital nature;
the ST antenna diameter does not exceed 1,8 m, or equivalent effective area;
the ST is designed for unattended operations.
The equipment considered in the present document comprises both the outdoor unit, usually composed of the antenna subsystem and associated upconverter, power amplifier and Low Noise Block (LNB) downconverter, and the indoor unit, usually composed of receive and transmit logic as well as the modulator, including cables between these two units. The present document applies to the ST with its ancillary equipment and its various ports and when operated within the boundary limits of all the operational environmental profile declared by the applicant and when installed as required by the applicant by declaration or in the user documentation. All parts of the indoor unit related to reception, processing and presentation of the received information except the control channel are not within the scope of the present document. The syntax of the control channel messages is outside the scope of the present document. The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 326-2 V1.1.1:2006(Main)
Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment
ETSI EN 302 326-2 V1.1.1 (2005-12)

The present document is intended to cover the provisions of the R&TTE Directive [2] regarding article 3.2, which states that "[...] radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
The present document is applicable to the essential requirements of equipment (including equipment with integral antennas) used in Multipoint (MP) Digital Fixed Radio Systems (DFRS). The present document, together with EN 302 326-3 [12] are intended to replace and supersede, after a suitable transition period, the harmonized EN 301 753 (see bibliography) for all multipoint equipment and antennas. The present document and EN 302 326-3 [12] introduce rationalization among systems conforming to previous EN 301 753 (see bibliography) referencing a number of ENs which, being developed at different times, might have specified slightly different requirements. However, care has been taken so that such variations will not affect any frequency planning assumption for already deployed networks. Therefore, unless specifically mentioned, these new requirements, whenever different from those single ENs, are considered completely "equivalent". Therefore mixed use of equipment conforming to the present document and to those previous one will not change, in practice, any frequency planning rule in any network.
Therefore, from a strictly technical point of view, in most cases it is expected that equipment already conforming to the previous versions of Harmonized EN 301 753 (see bibliography), would not need re-assessment of essential requirements according to the present document. The legal implications of the declaration of conformity and equipment labelling are, however, outside the scope of this whole multi-part deliverable. Cases, where additional conformance assessment is anyhow required, will be specifically mentioned in the present document and also EN 302 326-3 [12].
In addition to the present document, other ENs specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [2] and which will apply to equipment within the scope of the present document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.
In order to (technically) cover different market and network requirements, with an appropriate balance of performance to cost and effective and appropriate use of the radio spectrum, the present document, together with EN 302 326-3 [12], offers a number of system types and antennas alternatives, for selection by administrations, operators and manufacturers dependent on the desired use of the radio spectrum and network/market requirements; those options include:
• channel separation alternatives (as provided by the relevant CEPT Recommendation);
• spectral efficiency class alternatives (different modulation formats provided in radio equipment standards);
• antenna sectorization alternatives and directivity classes for CS;
• antenna directivity class alternatives for TS and/or RS;
• antenna basic polarization (linear or circular).
The applicability of this whole multi-part deliverable to MP equipment is governed by the definition of a number of system profiles that define the set of consistent requirements as described in EN 302 326-1 [11] to which equipment shall conform.
The present document is considered applicable to fixed radio systems products with integral antennas, for which all the technical requirements included in the present document and in EN 302 326-3 [12] apply, and to separate equipment products, to which only the relevant technical requirements apply, and which might therefore be subject to separate declarations of conformity with respect to the essential requirements of the R&TTE Directive [2].

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 217-1 V1.1.4:2006(Main)
Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 1: Overview and system-independent common characteristics
ETSI EN 302 217-1 V1.1.4 (2005-11)

Through the notification of the UK interface regulation, the European Commission have strongly requested that ETSI TM4 consider a rationalisation of the number of fixed terrestrial (point-to-point) standards. This work item is therefore in response to this request and aims to simplify (and rationalise the number of)  existing standards.   This work item is to appraise only the published ETSI fixed terrestrial (point-to-point) radio relay standards and consolidate these into the new style generic format . The primary intention will be to rationalise the existing number of standards, in excess of 30, to just a handful, e.g. ideally 5. These standards will then be proposed as Harmonised Standards.  The preferred method of segmentation is yet to be decided, but this may be on the basis of  (frequency range or application or traffic capacity).  Annex A illustrates possible segmentation options.  The work will only consolidate new or existing work items on standards if the output deliverables are formally published before the completion of this work activity. Further, this work item does not, in principle, propose to change any existing technical parameter values, although the presentation of data/information may be modified to enhance understanding and usability leading to some new or revised requirements. The format shall be consistent across the range of standards which are segmented under the preferred method.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 326-3 V1.1.1:2006(Main)
Fixed Radio Systems; Multipoint Equipment and Antennas; Part 3: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Multipoint Radio Antennas
ETSI EN 302 326-3 V1.1.1 (2005-12)

The present document is intended to cover the provisions of the R&TTE Directive [1] regarding article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
The present document is applicable to the essential requirements of antennas (including equipment with integral antennas) used in fixed multipoint radio systems The present document together with EN 302 326-2 [7], is intended to replace and supersede, after a suitable transition period, the harmonized EN 301 753 (see bibliography). for all multipoint equipment and antennas under its scope.
The present document and EN 302 326-2 [7] introduce rationalization among systems conforming to previous EN 301 753 (see bibliography) referencing a number of ENs which, being developed at different times, may have specified slightly different antenna parameters. Nevertheless, care has been taken so that such variations will not affect any frequency planning assumption for already deployed networks. Therefore, unless specifically mentioned, these new requirements, whenever different from those single ENs, are considered completely "equivalent". Therefore mixed use of antennas conforming to the present document and to those previous ones will not change, in practice, any frequency planning rule in any network.
Therefore, from a strictly technical point of view, in most cases it is expected that equipment already conforming to the previous versions of Harmonized EN 301 753 (see bibliography), would not need re-assessment of essential requirements according to the present document. The legal implications of the declaration of conformity and equipment labelling are, however, outside the scope of this whole multi-part deliverable. Cases, where additional conformance
assessment is required, will be specifically mentioned in EN 302 326-2 [7] and in the present document. A formal change in the requirements, introduced by the present document, is that the antenna manufacturer shall declare the nominal gain and tolerance of the antenna against which the conformity assessment is done. In addition to the present document, other ENs specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] and which will apply to antennas within the scope of the present document.
NOTE: A list of such ENs is included on the web site: http://www.newapproach.org.
In order to (technically) cover different market and network requirements, with an appropriate balance of performance to cost and effective and appropriate use of the radio spectrum, the present document, together with EN 302 326-2 [7], offers a number of system types and antennas alternatives, for selection by administrations, operators and manufacturers dependent on the desired use of the radio spectrum and network/market requirements; those options include:
• channel separation alternatives (as provided by the relevant CEPT Recommendation);
• spectral efficiency class alternatives (different modulation formats provided in radio equipment standards);
• antenna sectorization alternatives and directivity classes for CS;
• antenna directivity class alternatives for TS and/or RS;
• antenna basic polarization (linear or circular).
For Digital Fixed Radio Systems (DFRS), antennas are considered "relevant components" of "radio equipment" according the definition in article 2(c) of the R&TTE Directive [1]. In particular, it has to be noted that TCAM, while recognizing the "essentiality" of antenna directional requirements for some applications, including the Fixed Service, has deliberated that there should be no obligation for separate declaration of conformity for stand alone antennas and that the conformity to the relevant essential requirements should be the responsibility of the final system integrator.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 217-2-1 V1.1.3:2006(Main)
Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2-1: System-dependent requirements for digital systems operating in frequency bands where frequency co-ordination is applied
ETSI EN 302 217-2-1 V1.1.3 (2004-12)

The present document summarizes all system-dependent requirements for Point-to-Point (P-P) equipment in applications deployed in bands where frequency co-ordination is generally applied. These requirements are introduced in two different clauses sub-sets:
• Main requirements are requirements that are also related to the "essential requirements" under article 3.2 of the R&TTE Directive [1] and further detailed in EN 302 217-2-2 [16].
• Complementary requirements are requirements that are not related to essential requirements under article 3.2 of the R&TTE Directive [1]. Nevertheless they are considered having been commonly agreed for proper system operation and deployment when specific deployment conditions or compatibility requirements are present. Compliance to all or some of these requirements is made on a voluntary basis. Description and limits for parameters relevant to essential requirements under article 3.2 of R&TTE Directive [1] are given in EN 302 217-2-2 [16].
For other system-dependent parameters where standardization is required but that do not affect the R&TTE Directive "essential requirements" mentioned above, description and limits are detailed in the present document in the annexes A to G, subdivided by frequency band or specific applications. The present document deals with Radio Frequency (RF) and base-band equipment characteristics; antenna system requirements are covered in EN 302 217-4-1 (see bibliography) and EN 302 217-4-2 (see bibliography). The present document does not cover test procedures and test conditions which are set out in EN 301 126-1 [14]. As the maximum transmission rate in a given bandwidth depends on system spectral efficiency, different equipment classes are defined:
• Class 1: equipment spectral efficiency based on typical 2-states modulation scheme (e.g. 2-FSK, 2-PSK or equivalent);
• Class 2: equipment spectral efficiency based on typical 4-states modulation scheme (e.g. 4-FSK, 4-QAM, or equivalent);
• Class 3: equipment spectral efficiency based on typical 8-states modulation scheme (e.g. 8-PSK, or equivalent);
NOTE: It is also noted that, in this class, for design commonality with other efficiency classes, the 16 QAM format is popular).
• Class 4: equipment spectral efficiency based on typical 16-states or 32-states modulation scheme (e.g. 16-QAM or 32-QAM, or equivalent);
• Class 5A: equipment spectral efficiency based on typical 64-states or 128-states modulation scheme (e.g. 64-QAM or 128-QAM, or equivalent), for cross-polar adjacent channel (ACAP) operation;
• Class 5B: equipment spectral efficiency based on typical 64-states or 128-states modulation scheme (e.g. 64-QAM or 128-QAM, or equivalent), for co-polar adjacent channel (ACCP) and frequency reuse through CCDP operation;
• Class 6A: equipment spectral efficiency based on typical 256-states or 512-states modulation scheme (e.g. 256-QAM or 512-QAM, or equivalent), for cross-polar adjacent channel (ACAP) operation;
• Class 6B: equipment spectral efficiency based on typical 256-states or 512-states modulation scheme (e.g. 256-QAM or 512-QAM, or equivalent), for co-polar adjacent channel (ACCP) and frequency reuse through CCDP operation.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 126-2-3 V1.2.1:2006(Main)
Fixed Radio Systems; Conformance testing; Part 2-3: Point-to-Multipoint equipment; Test procedures for TDMA systems
ETSI EN 301 126-2-3 V1.2.1 (2004-11)

The present document details standardized test procedures for conformance testing of equipment for Point-to-MultiPoint (P-MP) digital radio relay systems applying time division multiple access method (TDMA). Optionally, for certain of the system types defined in the present document, other access methods (e.g. Orthogonal Frequency Division Multiple Access (OFDMA)) may be used in conjunction with TDMA to provide another dimension of multiple access.
Standardized procedures are required in order to fulfil ECC/DEC/(04)04 [1] on the mutual recognition, within CEPT, of the results of conformance tests on equipment carried out in individual CEPT Countries. Furthermore the procedures described in the present document are relevant to be able to fulfil the conformance assessment procedure described in Chapter II of the Directive 1999/5/EC [3] in order to demonstrate the compliance of the DRRS with the relevant Essential Requirements identified in Article 3.2 of the Directive 1999/5/EC [3]. The present document is intended to be applied in conjunction with EN 301 126-2-1 [2] and in conjunction with the individual equipment ENs/ETSs describing TDMA methods and will enable commonality of test results, irrespective of the Supplier or the Notified Body carrying out the test.
The conformance tests described in the present document are those related to radio specific parameters required directly by the relevant radio relay ENs/ETSs. Conformance tests to other boundary EN/ETS (e.g. those for system input/output interfaces and related base band process) are outside the scope of the present document.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 217-4-1 V1.1.3:2006(Main)
Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 4-1: System-dependent requirements for antennas
ETSI EN 302 217-4-1 V1.1.3 (2004-12)

The present document summarizes all requirements for single main beam, linear polarization, directional antennas to be adopted in conjunction with Point-to-Point (PP) systems operating in the frequency range 1 GHz to 60 GHz. Single polarization antennas, dual polarization antennas, dual band/single polarized antennas and dual band/dual polarization antennas are considered. Description and limits for parameters relevant to essential requirements under article 3.2 of the R&TTE Directive [1] are given in EN 302 217-4-2 [4].
For other parameters and general information that does not affect the R&TTE Directive [1] "essential requirements" mentioned above, description and limits are set out in the present document. There are a number of different antenna types for various applications, the principles by which they are classified are given in clause 5. The present document does not cover aspects related to test procedures and test conditions, which are covered by the scope of EN 301 126-3-1 [2]. Guidance on the definition of radio parameters relevant to the essential requirements under article 3.2 of the R&TTE Directive [1] for DFRS may be found in TR 101 506 (see bibliography).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 217-1 V1.1.3:2006(Main)
Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 1: Overview and system-independent common characteristics
ETSI EN 302 217-1 V1.1.3 (2004-12)

The present document applies to the following digital fixed radio systems (DFRS), including equipment with integral antenna, and antenna types:
• point-to-point systems intended for operation in frequency bands that require co-ordination;
• point-to-point systems intended for operation in frequency bands that do not require co-ordination;
• antennas for point-to-point operation.
The present document summarizes all characteristics, principles and definitions that are common to all P-P equipment and antennas, EN 302 217- 2-1 and EN 302 217-4-1 (see bibliography) summarize the other system dependent characteristics and include limits for "non-essential" requirements, EN 302 217-2-2, EN 302 217-3 and EN 302 217-4-2 (see bibliography) contain the whole description and limits of "essential" requirements under article 3.2 of the R&TTE Directive [1]. Health and safety requirements, relevant to article 3.1a of the R&TTE Directive [1] are not considered in any part of this EN 302 217 series. EMC conditions and requirements, relevant to article 3.1b of the R&TTE Directive [1] and any other essential requirement relevant to article 3.3 of the R&TTE Directive [1] are not in the scope of any part of this EN 302 217 series.
However, for reader information, EG 201 752 (see bibliography) gives guidance in the selection of other ETSI and CENELEC standards for the assessment of essential requirements under article 3.1 of the R&TTE Directive [1] for any Fixed Radio System.
NOTE: A list of such ENs is available on the web site http://www.newapproach.org.
For administration's guidance when notifying their regulated interfaces in accordance with article 4.1 of the R&TTE Directive [1], annex B provides explanatory considerations on the applicability of the TCAM-RIG format for P-P fixed links. An example of such a notification is also provided. Annex B has been elaborated in co-ordination with the CEPT ECC WG SE.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day