SIST EN 60335-2-97:2007/A12:2015
(Amendment)Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
Deals with the safety of electric drives for rolling equipment such as shutters, blinds and awnings, intended for household and similar purposes, their rated voltage being more than 250 V for single-phase appliances and 480 V for other appliances. Examples of rolling equipment that can be driven are awnings; blinds; grilles; projection screens; shutters for doors and windows. Drives for equipment with a spring-controlled driven part, such as a folding arm awning, are also within the scope of this standard.
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-97: Besondere Anforderungen für Rollläden, Markisen, Jalousien und ähnliche Einrichtungen
Appareils électrodomestiques et analogues - Sécurité - Partie 2-97: Règles particulières pour les motorisations de volets, stores, rideaux et équipements enroulables analogues
Gospodinjski in podobni električni aparati - Varnost - 2-97. del: Posebne zahteve za pogonske sklope rolojev, ponjav, senčnikov in podobne opreme - Dopolnilo A12
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60335-2-97:2007/A12:2015
01-april-2015
*RVSRGLQMVNLLQSRGREQLHOHNWULþQLDSDUDWL9DUQRVW GHO 3RVHEQH]DKWHYH
]DSRJRQVNHVNORSHURORMHYSRQMDYVHQþQLNRYLQSRGREQHRSUHPH'RSROQLOR
$
Household and similar electrical appliances - Safety - Part 2-97: Particular requirements
for drives for rolling shutters, awnings, blinds and similar equipment
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-97:
Besondere Anforderungen für Rollläden, Markisen, Jalousien und ähnliche Einrichtungen
Appareils électrodomestiques et analogues - Sécurité - Partie 2-97: Règles particulières
pour les motorisations de volets, stores, rideaux et équipements enroulables analogues
Ta slovenski standard je istoveten z: EN 60335-2-97:2006/A12:2015
ICS:
13.120 Varnost na domu Domestic safety
91.060.50 Vrata in okna Doors and windows
SIST EN 60335-2-97:2007/A12:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60335-2-97:2007/A12:2015
---------------------- Page: 2 ----------------------
SIST EN 60335-2-97:2007/A12:2015
EUROPEAN STANDARD EN 60335-2-97:2006/A12
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2015
ICS 29.120.01; 91.060.50
English Version
Household and similar electrical appliances - Safety - Part 2-97:
Particular requirements for drives for rolling shutters, awnings,
blinds and similar equipment
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-97: Règles particulières pour les motorisations de ähnliche Zwecke - Teil 2-97: Besondere Anforderungen für
volets, stores, rideaux et équipements enroulables Rollläden, Markisen, Jalousien und ähnliche Einrichtungen
analogues
This amendment A12 modifies the European Standard EN 60335-2-97:2006; it was approved by CENELEC on 2014-09-29. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60335-2-97:2006/A12:2015 E
---------------------- Page: 3 ----------------------
SIST EN 60335-2-97:2007/A12:2015
EN 60335-2-97:2006/A12:2015 - 2 -
Foreword
This document (EN 60335-2-97:2006/A12:2015) has been prepared by CLC/TC 61, "Safety of household and
similar electrical appliances".
The following dates are fixed:
(dop) 2015-09-29
• latest date by which this document has to be
implemented
at national level by publication of an identical
national standard or by endorsement
• latest date by which the national standards conflicting (dow) 2017-09-29
with this document have to be withdrawn
This amendment supplements or modifies the corresponding clauses of EN 60335-2-97:2006, EN 60335-2-
97:2006/A11:2008 and EN 60335-2-97:2006/A2:2010.
This amendment is to be used in conjunction with EN 60335-1:2012 including its amendments.
When a particular subclause of Part 1 is not mentioned in this Part 2, that subclause applies as far as is
reasonable. When this standard states "addition", "modification" or "replacement" it is to be understood as
addition or modification or replacement to the published EN Part 2, unless the introductory sentence mentions
Part 1.
NOTE 1 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those
in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.;
Clauses, subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z.
NOTE 2 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also
in bold.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and
the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive 2006/42/EC, see informative Annex ZZ, which is an integral part of this
document.
---------------------- Page: 4 ----------------------
SIST EN 60335-2-97:2007/A12:2015
- 3 - EN 60335-2-97:2006/A12:2015
Introduction
Add:
This European Standard has been prepared to provide a means of conforming to essential safety
requirements of the Machinery Directive 2006/42/EC. Other requirements and other EU Directives may be
applicable to the drives falling within the scope of this standard.
The relevant requirements of Annex ZE of Part 1 have been incorporated in the text of this Part 2.
Therefore, compliance with the requirements of EN 60335-1 and of this Part 2 gives presumption of conformity
of the product with the Essential Health and Safety Requirements (EHSR) of Directive 2006/42/EC as stated
in Annex ZZ.
Drives put on the market as machines may be installed by the final user. The requirements of this standard
also cover the foreseeable misuse of the power operated shutters, blinds and awnings.
Drives put on the market as partly completed machines should not be installed by the final user. In case of
partly completed machines, reference should be made to the specific procedures of the Machinery Directive
2006/42/EC; this standard can anyhow be used as guidance.
---------------------- Page: 5 ----------------------
SIST EN 60335-2-97:2007/A12:2015
EN 60335-2-97:2006/A12:2015 - 4 -
1 Scope
Replacement:
This clause of Part 1 is replaced by the following:
This European Standard deals with the safety of electric drives for rolling equipment such as shutters, blinds
and awnings, intended for household and similar purposes, their rated voltage being not more than 250 V for
single-phase drives and 480 V for other drives. It also covers the hazards associated with the movement of
the rolling equipment such as shutters, blinds and awnings.
Drives for equipment with a spring-controlled driven part, such as a folding arm awning, are also within the
scope of this standard.
NOTE Z101 Battery-operated drives and other d.c. supplied drives are within the scope of this standard.
NOTE Z102 Examples of places where shutters, blinds and awnings for household environment may also be used by
non expert users:
– shops, offices and other working environments
– farm houses;
– hotels, motels and other residential type environments where they are used by clients;
– bed and breakfast type environments.
NOTE Z103 Household environment includes the dwelling and its associated buildings, the garden, etc.
Drives being part of power operated shutters, blinds and awnings which are intended to be used by trained
users in shops, in light industry and on farms, are also within the scope of this standard.
NOTE Z104 Examples of rolling equipment that can be driven are
– awnings;
– blinds;
– grilles covering doors and windows;
– projection screens;
– shutters covering doors and windows.
Examples are shown in Figure 101.
NOTE Z105 Drives may be supplied with a driven part.
NOTE Z106 Within the standard the terms drive and appliance are interchangeable.
This standard deals with the reasonably foreseeable hazards presented by drives that are encountered by all
persons in and around the installation place. However, in general, it does not take into account:
− children playing with the appliance;
− the use of the appliance by very young children;
− the use of the appliance by young children without supervision.
It is recognized that very vulnerable people may have needs beyond the level addressed in this standard.
NOTE Z107 This standard does not apply to
– drives for vertically moving garage doors for residential use (EN 60335-2-95);
– drives for rolling doors (EN 60335-2-103);
– drives for theatre curtains;
– sliding and trolley jack drives.
---------------------- Page: 6 ----------------------
SIST EN 60335-2-97:2007/A12:2015
- 5 - EN 60335-2-97:2006/A12:2015
Products covered by this standard do not create a noise hazard.
2 Normative references
Addition:
EN 60825-1, Safety of laser products – Part 1: Equipment classification and requirements (IEC 60825-1)
EN 60811-4-1, Insulating and sheathing materials of electric and optical cables – Common test methods –
Part 4-1: Methods specific to polyethylene and polypropylene compounds – Resistance to environmental
stress cracking – Measurement of the melt flow index – Carbon black and/or mineral filler content
measurement in polyethylene by direct combustion – Measurement of carbon black content by
thermogravimetric analysis (TGA) – Assessment of carbon black dispersion in polyethylene using a
microscope (IEC 60811-4-1)
3 Definitions
3.101 Modification:
Replace the text of the note by the following:
Examples of components are gears, controls, brakes, components for power transmission from the drive to the driven part
(e.g. trolleys, rails, levers, etc.).
3.106 Modification:
biased-off switch
control device which initiates and maintains the drive movement only as long as the manual control (actuator)
is actuated by the user
Note Z101 to entry: A biased-off switch is also called “hold to run control”.
4 General requirement
Replacement:
This clause of Part 1 is applicable except as follows.
Add at the end of the first paragraph of Part 1:
Drives shall also be constructed in such a way they ensure transportation, installation, adjusting and
maintenance are carried out safely.
5 General conditions for the tests
5.2 Addition:
When a test has to be carried out with a driven part, the driven part specified for installation with the drive
that gives the most unfavourable conditions for the test is used. The drive is adjusted in accordance with the
instructions.
The driven part may be simulated by an artificial load.
5.3 Addition:
When a drive incorporates a sub-assembly or a part which has already been tested against relevant clause(s)
of this standard, those tests need not be repeated, if the incorporation of the sub-assembly or part into the
drive does not change the performance of the sub-assembly or part.
---------------------- Page: 7 ----------------------
SIST EN 60335-2-97:2007/A12:2015
EN 60335-2-97:2006/A12:2015 - 6 -
5.101 Replacement:
If a driven part is needed for a test, this driven part can be simulated by an artificial load according to the
principles shown in Figure 102.
NOTE The load is considered to be the driven part for the tests of 20.101, 20.102 and 20.103.
Add a new subclause:
5.Z101 Drives shall be tested for compliance with this standard for any mode of operation described by the
manufacturer in the installation instructions. Whenever required by the instructions, components shall be
added or changed to perform the tests.
6 Classification
Replacement:
6.2 Addition:
Drives, or parts of drives, that are intended for exposure to outdoor conditions shall be at least IPX4.
Drives or parts of drives exposed to driven parts which are exposed to outdoor conditions are considered to
be intended for exposure to outdoors conditions.
7 Marking and instructions
7.1 Replace the fourth and fifth dashed items in Part 1 as follows:
− trade mark or identification mark, business name and postal address or code of the manufacturer and,
where applicable, his authorized representative. When, due to the size of the drive, this is not
possible, trade mark or identification mark are acceptable on the product and business name and full
address are included in the instructions for use;
− model or type reference, serial number, if any, and production year;
NOTE Z101 Production year is the year when the production process is completed. The production year can be part
of the serial number.
Add a new dashed item:
− designation of the drive. The designation enables the identification of the drive as
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.