SIST EN ISO 20349-2:2017/A1:2021

Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2: Requirements and test methods for protection against risks in welding and allied processes - Amendment 1 (ISO 20349-2:2017/Amd 1:2020)

Modification of annex ZA and addition of an European informative annex

Persönliche Schutzausrüstung - Schuhe zum Schutz gegen Risiken in Gießereien und beim Schweißen - Teil 2: Anforderungen und Prüfverfahren zum Schutz gegen Risiken beim Schweißen und verwandten Verfahren - Änderung 1 (ISO 20349-2:2017/Amd 1:2020)

No scope available

Équipement de protection individuelle - Chaussures de protection contre les risques dans les fonderies et lors d'opérations de soudage - Partie 2: Exigences et méthodes d'essai pour la protection contre les risques lors d'opérations de soudage et techniques connexes - Amendement 1 (ISO 20349-2:2017/Amd 1:2020)

Osebna varovalna oprema - Obutev za zaščito pred tveganji v livarnah in pri varjenju - 2. del: Zahteve in preskusne metode za zaščito pred tveganji pri varjenju in sorodnih postopkih - Dopolnilo A1 (ISO 20349-2:2017/Amd 1:2020)

General Information

• Status: Published
• Public Enquiry End Date: 19-May-2020
• Publication Date: 16-Dec-2020
• ICS: 13.340.50 - Leg and foot protection
• Technical Committee: OVP - Personal protecting equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 20-Nov-2020
• Due Date: 25-Jan-2021
• Completion Date: 17-Dec-2020
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: EN ISO 20349-2:2017/A1:2020 - Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2: Requirements and test methods for protection against risks in welding and allied processes - Amendment 1 (ISO 20349-2:2017/Amd 1:2020)

Relations

• Amends: SIST EN ISO 20349-2:2017 - Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)
• Effective Date: 01-Jan-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 20349-2:2017/A1:2021
01-januar-2021
Osebna varovalna oprema - Obutev za zaščito pred tveganji v livarnah in pri
varjenju - 2. del: Zahteve in preskusne metode za zaščito pred tveganji pri varjenju
in sorodnih postopkih - Dopolnilo A1 (ISO 20349-2:2017/Amd 1:2020)
Personal protective equipment - Footwear protecting against risks in foundries and
welding - Part 2: Requirements and test methods for protection against risks in welding
and allied processes - Amendment 1 (ISO 20349-2:2017/Amd 1:2020)
Persönliche Schutzausrüstung - Schuhe zum Schutz gegen Risiken in Gießereien und
beim Schweißen - Teil 2: Anforderungen und Prüfverfahren zum Schutz gegen Risiken
beim Schweißen und verwandten Verfahren - Änderung 1 (ISO 20349-2:2017/Amd
1:2020)
Équipement de protection individuelle - Chaussures de protection contre les risques
dans les fonderies et lors d'opérations de soudage - Partie 2: Exigences et méthodes
d'essai pour la protection contre les risques lors d'opérations de soudage et techniques
connexes - Amendement 1 (ISO 20349-2:2017/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 20349-2:2017/A1:2020
ICS:
13.340.50 Varovanje nog in stopal Leg and foot protection
SIST EN ISO 20349-2:2017/A1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 20349-2:2017/A1:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 20349-2:2017/A1:2021


EN ISO 20349-2:2017/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2020
EUROPÄISCHE NORM
ICS 13.340.50
English Version

Personal protective equipment - Footwear protecting
against risks in foundries and welding - Part 2:
Requirements and test methods for protection against
risks in welding and allied processes - Amendment 1 (ISO
20349-2:2017/Amd 1:2020)
Équipement de protection individuelle - Chaussures de Persönliche Schutzausrüstung - Schuhe zum Schutz
protection contre les risques dans les fonderies et lors gegen Risiken in Gießereien und beim Schweißen - Teil
d'opérations de soudage - Partie 2: Exigences et 2: Anforderungen und Prüfverfahren zum Schutz gegen
méthodes d'essai pour la protection contre les risques Risiken beim Schweißen und verwandten Verfahren -
lors d'opérations de soudage et techniques connexes - Änderung 1 (ISO 20349-2:2017/Amd 1:2020)
Amendement 1 (ISO 20349-2:2017/Amd 1:2020)
This amendment A1 modifies the European Standard EN ISO 20349-2:2017; it was approved by CEN on 31 July 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20349-2:2017/A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 20349-2:2017/A1:2021
EN ISO 20349-2:2017/A1:2020 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 of the European Parliament and of the
Council of 9 March 2016 on personal protective equipment aimed to be covered. 4

2

---------------------- Page: 4 ----------------------
SIST EN ISO 20349-2:2017/A1:2021
EN ISO 20349-2:2017/A1:2020 (E)
European foreword
This document (EN ISO 20349-2:2017/A1:2020) has been prepared by Technical Committee ISO/TC 94
"Personal safety -- Personal protective equipment" in collaboration with Technical Committee CEN/TC
161 “Foot and leg protectors” the secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 20349-2:2017 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by May 2021, and
conflicting national standards shall be withdrawn at the latest by May 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 20349-2:2017/Amd 1:2020 has been approved by CEN as EN ISO 20349-
2:2017/A1:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 20349-2:2017/A1:2021
EN ISO 20349-2:2017/A1:2020 (E)
Annex ZA
(informative)

Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 of the European Parliament and
of the Council of 9 March 2016 on personal protective equipment aimed to
be covered
This European Standard has been prepared under a Commission’s standardization request to provide
one voluntary means of conforming to essential requirements of Regulation (EU) 2016/425 of the
European Parliament and of the Council of 9 March 2016 on personal protective equipment.
Once this standard is cited in the Official Journal of the European Union under that Regulation,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Regulation, and associated EFTA-regulations.
Table ZA.1 — Correspondence between this European Standard and
Annex II of Regulation (EU) 2016/425
Essential Requirements of Clause(s)/sub-clause(s) of Remarks/Notes
Regulation (EU) 2016/425
EN ISO 20349-2:2017
1.1.1 Ergonomics 6, 7.1, 7.2 By reference to EN ISO
20345:2011
1.2.1.1 Innocuousness of PPE 6, 7.5 By reference to EN ISO
20345:2011
1.3.2 Lightness and strength 6, 7.3, 7.4 By reference to EN ISO
20345:2011
1.4 Information supplied by the 9, Annex A of EN ISO 20349-2 :2017
manufacturer
2.4. PPE subject to ageing 9
2.6 PPE for use in potentially 6 By reference to EN ISO
explosive atmospheres 20345:2011
2.12 PPE bearing one or more 8
identification or recognition
marks directly or indirectly
relating to health and safety
3.1.2.1 Prevention of falls due to 6 By reference to EN ISO 20345:
slipping
2011
3.2 Protection against static 6 By reference to EN ISO 20345:
compression of a part of the body
2011
3.3 Protection against 6 By reference to EN ISO 20345:
mechanical injuries
2011
3.6.1. PPE constituent materials 7.4 No protection is foreseen for
4

---------------------- Page: 6 ----------------------
SIST EN ISO 20349-2:2017/A1:2021
EN ISO 20349-2:2017/A1:2020 (E)
and other components thermal effect of electrical arc
3.6.2. Complete PPE ready for use 7.3, 7.4 Including information given in
Annex A of EN ISO 20349-

2:2017
3.7 Protection against cold 6 By reference to EN ISO
20345:2011
3.8.1 Insulating equipment 6, 9 By reference to EN ISO
20345:2011
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.

5

---
...

SLOVENSKI STANDARD
SIST EN ISO 20349-2:2017/oprA1:2020
01-maj-2020
Osebna varovalna oprema - Obutev za zaščito pred tveganji v livarnah in pri
varjenju - 2. del: Zahteve in preskusne metode za zaščito pred tveganji pri varjenju
in sorodnih postopkih - Dopolnilo A1 (ISO 20349-2:2017/DAM 1:2020)
Personal protective equipment - Footwear protecting against risks in foundries and
welding - Part 2: Requirements and test methods for protection against risks in welding
and allied processes - Amendment 1 (ISO 20349-2:2017/DAM 1:2020)
Persönliche Schutzausrüstung - Schuhe zum Schutz gegen Risiken in Gießereien und
beim Schweißen - Teil 2: Anforderungen und Prüfverfahren zum Schutz gegen Risiken
beim Schweißen und verwandten Verfahren - ÄNDERUNG 1 (ISO 20349-2:2017/DAM
1:2020)
Équipement de protection individuelle - Chaussures de protection contre les risques
dans les fonderies et lors d'opérations de soudage - Partie 2: Exigences et méthodes
d'essai pour la protection contre les risques lors d'opérations de soudage et techniques
connexes - Amendement 1 (ISO 20349-2:2017/DAM 1:2020)
Ta slovenski standard je istoveten z: EN ISO 20349-2:2017/prA1
ICS:
13.340.50 Varovanje nog in stopal Leg and foot protection
SIST EN ISO 20349-2:2017/oprA1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 20349-2:2017/oprA1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 20349-2:2017/oprA1:2020
DRAFT AMENDMENT
ISO 20349-2:2017/DAM 1
ISO/TC 94/SC 3 Secretariat: BSI
Voting begins on: Voting terminates on:
2020-03-10 2020-06-02
Personal protective equipment — Footwear protecting
against risks in foundries and welding —
Part 2:
Requirements and test methods for protection against
risks in welding and allied processes
AMENDMENT 1
Équipement de protection individuelle — Chaussures de protection contre les risques dans les fonderies et
lors d'opérations de soudage —
Partie 2: Exigences et méthodes d'essai pour la protection contre les risques lors d'opérations de soudage et
techniques connexes
AMENDEMENT 1
ICS: 13.340.50
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
This document is circulated as received from the committee secretariat.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 20349-2:2017/DAM 1:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020

---------------------- Page: 3 ----------------------
SIST EN ISO 20349-2:2017/oprA1:2020
ISO 20349-2:2017/DAM 1:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
SIST EN ISO 20349-2:2017/oprA1:2020
ISO 20349-2:2017/DAM 1:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 94 , Personal safety – Personal protective
equipment, Subcommittee SC 3, Footwear protection.
A list of all parts in the ISO 20349 series can be found on the ISO website.
© ISO 2020 – All rights reserved iii

---------------------- Page: 5 ----------------------
SIST EN ISO 20349-2:2017/oprA1:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 20349-2:2017/oprA1:2020
ISO 20349-2:2017/DAM 1:2020(E)
Personal protective equipment — Footwear protecting
against risks in foundries and welding —
Part 2:
Requirements and test methods for protection against
risks in welding and allied processes
AMENDMENT 1
1 New annex A
Insert the following new annex A.
Annex A
(informative)

Heat protection
A.1 Introduction
PPE designed to protect all or a part of the body against the effects of heat and/or fire must possess
thermal resistance and mechanical strength appropriate to the foreseeable conditions of use.
This informative annex provides the reader with information on heat and flame resistance in relation
to footwear for welders and allied processes. When sp
...