SIST EN 301 908-6 V5.2.1:2011
(Main)IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 6: CDMA TDD (UTRA TDD) User Equipment (UE)
IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 6: CDMA TDD (UTRA TDD) User Equipment (UE)
The present document applies to the following radio equipment type:
• User equipment for IMT-2000 CDMA TDD (UTRA TDD).
This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1-1.
The UTRA TDD component of IMT-2000 CDMA TDD supports three options of the TDD mode with the chip rates of 3,84 Mcps, 7,68 Mcps and 1,28 Mcps. These three options are called the 3,84 Mcps TDD option, the 1,28 Mcps TDD option and the 7,68 Mcps TDD option respectively. The requirements are listed in different clauses only if the parameters deviate. The present document covers requirements for:
• 3,84 Mcps UTRA TDD option user equipment for Releases 99, 4, 5, 6, 7, 8 and 9;
• 1,28 Mcps UTRA TDD option user equipment for Releases 4, 5, 6, 7, 8 and 9;
• 7,68 Mcps UTRA TDD option user equipment for Releases 7, 8 and 9.
For the case of IMB, only the 3,84 Mcps UTRA TDD option applies.
The present document covers the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive) article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present document.
Celična omrežja IMT - Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE - 6. del: CDMA TDD (UTRA TDD) (UE)
Ta dokument velja za naslednjo vrsto radijske opreme:
• uporabniško opremo za IMT-2000 CDMA TDD (UTRA FDD).
Ta vrsta radijske opreme je zmožna delovati v vseh ali katerem koli delu frekvenčnega pasu, kot so navedeni v preglednici 1-1.
Komponenta UTRA TDD IMT-2000 CDMA TDD podpira tri možnosti načina TDD s številom pulzov kode 3,84 Mcps, 7,68 Mcps in 1,28 Mcps. Te tri možnosti so imenovane 3,84 Mcps TDD možnost, 1,28 Mcps TDD možnost in 7,68 Mcps TDD možnost v tem vrstnem redu. Zahteve so navedene v različnih točkah, samo če parametri odstopajo. Ta dokument zajema zahteve za:
• uporabniško opremo 3,84 Mcps UTRA TDD možnost za izdaje 99, 4, 5, 6, 7, 8 in 9;
• uporabniško opremo 1,28 Mcps UTRA TDD možnost za izdaje 4, 5, 6, 7,8 in 9;
• uporabniško opremo 7,68 Mcps UTRA TDD možnost za izdajo 7,8 in 9.
Za primer IMB velja samo možnost 3,84 Mcps UTRA TDD.
Ta dokument zajema določbe Direktive 1999/5/EC [i.2] (direktive R&TTE), člena 3.2, ki navaja, da » … radijska oprema je narejena tako, da učinkovito izrablja spekter, razporejen za prizemne/vesoljske radiokomunikacije in orbitalne vire, tako da ne pride do škodljivega motenja«.
Poleg tega dokumenta se preostali EN, ki določajo tehnične zahteve v skladu z bistvenimi zahtevami v drugih delih člena 3 direktive R&TTE [i.2], lahko uporabljajo za opremo v okviru področja uporabe tega dokumenta.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 6: CDMA TDD (UTRA TDD) User Equipment (UE)33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 908-6 Version 5.2.1SIST EN 301 908-6 V5.2.1:2011en01-september-2011SIST EN 301 908-6 V5.2.1:2011SLOVENSKI
STANDARD
SIST EN 301 908-6 V5.2.1:2011
ETSI EN 301 908-6 V5.2.1 (2011-07)Harmonized European Standard IMT cellular networks;Harmonized EN covering the essential requirementsof article 3.2 of the R&TTE Directive;Part 6: CDMA TDD (UTRA TDD) User Equipment (UE) SIST EN 301 908-6 V5.2.1:2011
ETSI ETSI EN 301 908-6 V5.2.1 (2011-07) 2
Reference REN/MSG-TFES-010-6 Keywords 3G, 3GPP, cellular, digital, IMB, IMT, IMT-2000, MBSFN, mobile, radio, regulation, TD-CDMA, TDD, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-6 V5.2.1:2011
ETSI ETSI EN 301 908-6 V5.2.1 (2011-07) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Introduction . 7 1 Scope . 8 2 References . 8 2.1 Normative references . 8 2.2 Informative references . 9 3 Definitions, symbols and abbreviations . 9 3.1 Definitions . 9 3.2 Symbols . 10 3.3 Abbreviations . 11 4 Technical requirements specifications . 11 4.1 Environmental profile . 11 4.2 Conformance requirements . 11 4.2.1 Introduction. 12 4.2.2 Spectrum emission mask . 12 4.2.2.1 Definition . 12 4.2.2.1.1 3,84 Mcps TDD option . 12 4.2.2.1.2 1,28 Mcps TDD option . 12 4.2.2.1.3 7,68 Mcps TDD option . 12 4.2.2.2 Limits . 13 4.2.2.2.1 3,84 Mcps TDD option . 13 4.2.2.2.2 1,28 Mcps TDD option . 13 4.2.2.2.3 7,68 Mcps TDD option . 14 4.2.2.3 Conformance . 14 4.2.3 Transmitter spurious emissions . 14 4.2.3.1 Definition . 14 4.2.3.2 Limits . 14 4.2.3.2.1 3,84 Mcps TDD option . 14 4.2.3.2.2 1,28 Mcps TDD option . 15 4.2.3.2.3 7,68 Mcps TDD option . 15 4.2.3.3 Conformance . 16 4.2.4 Maximum output power . 16 4.2.4.1 Definition . 16 4.2.4.2 Limits . 16 4.2.4.3 Conformance . 16 4.2.5 Minimum transmit output power . 16 4.2.5.1 Definition . 16 4.2.5.2 Limits . 16 4.2.5.2.1 3,84 Mcps TDD option . 16 4.2.5.2.2 1,28 Mcps TDD option . 16 4.2.5.2.3 7,68 Mcps TDD option . 16 4.2.5.3 Conformance . 16 4.2.6 Receiver spurious emissions . 16 4.2.6.1 Definition . 16 4.2.6.2 Limits . 17 4.2.6.2.1 3,84 Mcps TDD option . 17 4.2.6.2.2 1,28 Mcps TDD option . 17 4.2.6.2.3 7,68 Mcps TDD option . 17 4.2.6.3 Conformance . 18 4.2.7 Receiver blocking characteristics . 18 4.2.7.1 Definition . 18 4.2.7.2 Limits . 18 SIST EN 301 908-6 V5.2.1:2011
ETSI ETSI EN 301 908-6 V5.2.1 (2011-07) 4 4.2.7.2.1 3,84 Mcps TDD option . 18 4.2.7.2.2 1,28 Mcps TDD option . 19 4.2.7.2.3 7,68 Mcps TDD option . 20 4.2.7.3 Conformance . 21 4.2.8 Receiver intermodulation characteristics . 21 4.2.8.1 Definition and applicability . 21 4.2.8.2 Limits . 21 4.2.8.2.1 3,84 Mcps TDD option . 21 4.2.8.2.2 1,28 Mcps TDD option . 21 4.2.8.2.3 7,68 Mcps TDD option . 21 4.2.8.3 Conformance . 22 4.2.9 Receiver spurious response . 22 4.2.9.1 Definition . 22 4.2.9.2 Limits . 22 4.2.9.2.1 3,84 Mcps TDD option . 22 4.2.9.2.2 1,28 Mcps TDD option . 22 4.2.9.2.3 7,68 Mcps TDD option . 23 4.2.9.3 Conformance . 23 4.2.10 Receiver adjacent channel selectivity . 23 4.2.10.1 Definition . 23 4.2.10.2 Limits . 23 4.2.10.2.1 3,84 Mcps TDD option . 23 4.2.10.2.2 1,28 Mcps TDD option . 23 4.2.10.2.3 7,68 Mcps TDD option . 24 4.2.10.3 Conformance . 24 4.2.11 Out-of-synchronization handling of output power . 24 4.2.11.1 Definition . 24 4.2.11.2 Limit . 24 4.2.11.2.1 3,84 Mcps TDD option . 24 4.2.11.2.2 1,28 Mcps TDD option . 25 4.2.11.2.3 7,68 Mcps TDD option . 26 4.2.11.3 Conformance . 27 4.2.12 Transmitter adjacent channel leakage power ratio . 28 4.2.12.1 Definition . 28 4.2.12.2 Limits . 28 4.2.12.2.1 3,84 Mcps TDD option . 28 4.2.12.2.2 1,28 Mcps TDD option . 28 4.2.12.2.3 7,68 Mcps TDD option . 28 4.2.12.3 Conformance . 28 5 Testing for compliance with technical requirements . 29 5.1 Environmental conditions for testing . 29 5.2 Interpretation of the measurement results . 29 5.3 Essential radio test suites . 30 5.3.1 Spectrum emission mask . 30 5.3.1.1 Method of test . 30 5.3.1.1.1 Initial conditions . 30 5.3.1.1.2 Procedure . 31 5.3.1.2 Test requirements . 31 5.3.2 Transmitter spurious emissions . 31 5.3.2.1 Method of test . 31 5.3.2.1.1 Initial conditions . 31 5.3.2.1.2 Procedure . 31 5.3.2.2 Test requirements . 32 5.3.3 Maximum output power . 32 5.3.3.1 Method of test . 32 5.3.3.1.1 Initial conditions . 32 5.3.3.1.2 Procedure . 32 5.3.3.2 Test requirements . 32 5.3.4 Minimum transmit output power . 32 5.3.4.1 Method of test . 32 5.3.4.1.1 Initial conditions . 32 SIST EN 301 908-6 V5.2.1:2011
ETSI ETSI EN 301 908-6 V5.2.1 (2011-07) 5 5.3.4.1.2 Procedure . 33 5.3.4.2 Test requirements . 33 5.3.5 Receiver spurious emissions . 33 5.3.5.1 Method of test . 33 5.3.5.1.1 Initial conditions . 33 5.3.5.1.2 Procedure . 34 5.3.5.2 Test requirements . 34 5.3.6 Receiver blocking characteristics . 35 5.3.6.1 Method of test . 35 5.3.6.1.1 Initial conditions . 35 5.3.6.1.2 Procedure . 35 5.3.6.2 Test requirements . 36 5.3.7 Receiver intermodulation characteristics . 36 5.3.7.1 Method of test . 36 5.3.7.1.1 Initial conditions . 36 5.3.7.1.2 Procedure . 36 5.3.7.2 Test requirements . 36 5.3.8 Receiver spurious response . 36 5.3.8.1 Method of test . 36 5.3.8.1.1 Initial conditions . 36 5.3.8.1.2 Procedure . 37 5.3.8.2 Test requirements . 37 5.3.9 Receiver adjacent channel selectivity . 37 5.3.9.1 Method of test . 37 5.3.9.1.1 Initial conditions . 37 5.3.9.1.2 Procedure . 37 5.3.9.2 Test requirements . 38 5.3.10 Out-of-synchronization handling of output power . 38 5.3.10.1 Method of test . 38 5.3.10.1.1 Initial conditions . 38 5.3.10.1.2 Procedure . 38 5.3.10.2 Test requirements . 39 5.3.11 Transmitter adjacent channel leakage power ratio . 39 5.3.11.1 Method of test . 39 5.3.11.1.1 Initial conditions . 39 5.3.11.1.2 Procedure . 39 5.3.11.2 Test requirements . 40 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 41 Annex B (normative): Environmental profile . 43 B.1 General . 43 B.1.1 Introduction . 43 B.1.2 Temperature . 43 B.1.3 Voltage . 43 B.1.4 Test environment . 44 Annex C (informative): The EN title in the official languages . 45 Annex D (informative): Bibliography . 46 History . 47
SIST EN 301 908-6 V5.2.1:2011
ETSI ETSI EN 301 908-6 V5.2.1 (2011-07) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present document has been produced by ETSI in response to mandate M/284 from the European Commission issued under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The title and reference to the present document are intended to included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2]. See article 5.1 of Directi
...
Final draft ETSI EN 301 908-6 V5.2.1 (2011-05)
Harmonized European Standard
IMT cellular networks;
Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive;
Part 6: CDMA TDD (UTRA TDD) User Equipment (UE)
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 301 908-6 V5.2.1 (2011-05)
Reference
REN/MSG-TFES-010-6
Keywords
3G, 3GPP, cellular, digital, IMB, IMT, IMT-2000,
MBSFN, mobile, radio, regulation, TD-CDMA,
TDD, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 301 908-6 V5.2.1 (2011-05)
Contents
Intellectual Property Rights . 6
Foreword . 6
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 10
3.3 Abbreviations . 11
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements . 11
4.2.1 Introduction. 12
4.2.2 Spectrum emission mask . 12
4.2.2.1 Definition . 12
4.2.2.1.1 3,84 Mcps TDD option . 12
4.2.2.1.2 1,28 Mcps TDD option . 12
4.2.2.1.3 7,68 Mcps TDD option . 12
4.2.2.2 Limits . 13
4.2.2.2.1 3,84 Mcps TDD option . 13
4.2.2.2.2 1,28 Mcps TDD option . 13
4.2.2.2.3 7,68 Mcps TDD option . 14
4.2.2.3 Conformance . 14
4.2.3 Transmitter spurious emis sions . 14
4.2.3.1 Definition . 14
4.2.3.2 Limits . 14
4.2.3.2.1 3,84 Mcps TDD option . 14
4.2.3.2.2 1,28 Mcps TDD option . 15
4.2.3.2.3 7,68 Mcps TDD option . 15
4.2.3.3 Conformance . 16
4.2.4 Maximum output power . 16
4.2.4.1 Definition . 16
4.2.4.2 Limits . 16
4.2.4.3 Conformance . 16
4.2.5 Minimum transmit output power . 16
4.2.5.1 Definition . 16
4.2.5.2 Limits . 16
4.2.5.2.1 3,84 Mcps TDD option . 16
4.2.5.2.2 1,28 Mcps TDD option . 16
4.2.5.2.3 7,68 Mcps TDD option . 16
4.2.5.3 Conformance . 16
4.2.6 Receiver spurious emissions . 16
4.2.6.1 Definition . 16
4.2.6.2 Limits . 17
4.2.6.2.1 3,84 Mcps TDD option . 17
4.2.6.2.2 1,28 Mcps TDD option . 17
4.2.6.2.3 7,68 Mcps TDD option . 17
4.2.6.3 Conformance . 18
4.2.7 Receiver blocking characteristics . 18
4.2.7.1 Definition . 18
4.2.7.2 Limits . 18
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 301 908-6 V5.2.1 (2011-05)
4.2.7.2.1 3,84 Mcps TDD option . 18
4.2.7.2.2 1,28 Mcps TDD option . 19
4.2.7.2.3 7,68 Mcps TDD option . 20
4.2.7.3 Conformance . 21
4.2.8 Receiver intermodulation characteristics . 21
4.2.8.1 Definition and applicability . 21
4.2.8.2 Limits . 21
4.2.8.2.1 3,84 Mcps TDD option . 21
4.2.8.2.2 1,28 Mcps TDD option . 21
4.2.8.2.3 7,68 Mcps TDD option . 21
4.2.8.3 Conformance . 22
4.2.9 Receiver spurious response . 22
4.2.9.1 Definition . 22
4.2.9.2 Limits . 22
4.2.9.2.1 3,84 Mcps TDD option . 22
4.2.9.2.2 1,28 Mcps TDD option . 22
4.2.9.2.3 7,68 Mcps TDD option . 23
4.2.9.3 Conformance . 23
4.2.10 Receiver adjacent channel selectivity . 23
4.2.10.1 Definition . 23
4.2.10.2 Limits . 23
4.2.10.2.1 3,84 Mcps TDD option . 23
4.2.10.2.2 1,28 Mcps TDD option . 23
4.2.10.2.3 7,68 Mcps TDD option . 24
4.2.10.3 Conformance . 24
4.2.11 Out-of-synchronization handling of output power . 24
4.2.11.1 Definition . 24
4.2.11.2 Limit . 24
4.2.11.2.1 3,84 Mcps TDD option . 24
4.2.11.2.2 1,28 Mcps TDD option . 25
4.2.11.2.3 7,68 Mcps TDD option . 26
4.2.11.3 Conformance . 27
4.2.12 Transmitter adjacent channel leakage power ratio . 28
4.2.12.1 Definition . 28
4.2.12.2 Limits . 28
4.2.12.2.1 3,84 Mcps TDD option . 28
4.2.12.2.2 1,28 Mcps TDD option . 28
4.2.12.2.3 7,68 Mcps TDD option . 28
4.2.12.3 Conformance . 28
5 Testing for compliance with technical requirements . 29
5.1 Environmental conditions for testing . 29
5.2 Interpretation of the measurement results . 29
5.3 Essential radio test suites . 30
5.3.1 Spectrum emission mask . 30
5.3.1.1 Method of test . 30
5.3.1.1.1 Initial conditions . 30
5.3.1.1.2 Procedure . 31
5.3.1.2 Test requirements . 31
5.3.2 Transmitter spurious emis sions . 31
5.3.2.1 Method of test . 31
5.3.2.1.1 Initial conditions . 31
5.3.2.1.2 Procedure . 31
5.3.2.2 Test requirements . 32
5.3.3 Maximum output power . 32
5.3.3.1 Method of test . 32
5.3.3.1.1 Initial conditions . 32
5.3.3.1.2 Procedure . 32
5.3.3.2 Test requirements . 32
5.3.4 Minimum transmit output power . 32
5.3.4.1 Method of test . 32
5.3.4.1.1 Initial conditions . 32
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 301 908-6 V5.2.1 (2011-05)
5.3.4.1.2 Procedure . 33
5.3.4.2 Test requirements . 33
5.3.5 Receiver spurious emissions . 33
5.3.5.1 Method of test . 33
5.3.5.1.1 Initial conditions . 33
5.3.5.1.2 Procedure . 34
5.3.5.2 Test requirements . 34
5.3.6 Receiver blocking characteristics . 35
5.3.6.1 Method of test . 35
5.3.6.1.1 Initial conditions . 35
5.3.6.1.2 Procedure . 35
5.3.6.2 Test requirements . 36
5.3.7 Receiver intermodulation characteristics . 36
5.3.7.1 Method of test . 36
5.3.7.1.1 Initial conditions . 36
5.3.7.1.2 Procedure . 36
5.3.7.2 Test requirements . 36
5.3.8 Receiver spurious response . 36
5.3.8.1 Method of test . 36
5.3.8.1.1 Initial conditions . 36
5.3.8.1.2 Procedure . 37
5.3.8.2 Test requirements . 37
5.3.9 Receiver adjacent channel selectivity . 37
5.3.9.1 Method of test . 37
5.3.9.1.1 Initial conditions . 37
5.3.9.1.2 Procedure . 37
5.3.9.2 Test requirements . 38
5.3.10 Out-of-synchronization handling of output power . 38
5.3.10.1 Method of test . 38
5.3.10.1.1 Initial conditions . 38
5.3.10.1.2 Procedure . 38
5.3.10.2 Test requirements . 39
5.3.11 Transmitter adjacent channel leakage power ratio . 39
5.3.11.1 Method of test . 39
5.3.11.1.1 Initial conditions . 39
5.3.11.1.2 Procedure . 39
5.3.11.2 Test requirements . 40
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 41
Annex B (normative): Environmental profile . 43
B.1 General . 43
B.1.1 Introduction . 43
B.1.2 Temperature . 43
B.1.3 Voltage . 43
B.1.4 Test environment . 44
Annex C (informative): The EN title in the official languages . 45
Annex D (informative): Bibliography . 46
History . 47
ETSI
---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 301 908-6 V5.2.1 (2011-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This final draft Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile
Standards Group (MSG), and is now submitted for the Vote phase of the ETSI standards Two-step Approval Procedure.
The present document has been produced by ETSI in response to mandate M/284 from the European Commission
issued under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information
in the field of technical standards and regulations.
The title and reference to the present document are intended to included in the pu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.