SIST EN 62148-3:2004
(Main)Fibre optic active components and devices - Package and interface standards -- Part 3: SFF MT-RJ 20-pin transceivers
Fibre optic active components and devices - Package and interface standards -- Part 3: SFF MT-RJ 20-pin transceivers
Provides the physical interface specifications for the SFF MT-RJ-20 fibre optic transceiver module family. The physical requirements of an optical transceiver that will enable mechanical interchangeability of transceivers complying with this standard both at the printed circuit wiring board and for any panel-mounting requirement are specified.
Aktive Lichtwellenleiterbauelemente und -geräte - Gehäuse- und Schnittstellennormen -- Teil 3: Sende- und Empfangsmodule des Typs SFF MT-RJ mit 20 Anschlüssen
Composants et dispositifs actifs en fibres optiques - Normes de boîtier et d'interface -- Partie 3: Emetteurs-récepteurs SFF MT-RJ à 20 broches
Provides the physical interface specifications for the SFF MT-RJ-20 fibre optic transceiver module family. The physical requirements of an optical transceiver that will enable mechanical interchangeability of transceivers complying with this standard both at the printed circuit wiring board and for any panel-mounting requirement are specified.
Aktivne komponente in naprave optičnih vlaken – Standardi oblike in vmesnika– 3. del: SFF MT-RJ 20 kontaktnih oddajnikov in sprejemnikov (IEC 62148-3:2003)*
General Information
Relations
Standards Content (Sample)
SIST EN 62148-3:2004SLOVENSKIseptember 2004
STANDARDAktivne komponente in naprave optičnih vlaken – Standardi oblike in vmesnika– 3. del: SFF
MT-RJ 20 kontaktnih oddajnikov in sprejemnikov (IEC 62148-3:2003)*Fibre optic active components and devices - Package and interface standards - Part 3: SFF MT-RJ 20-pin transceivers (IEC 62148-3:2003©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 62148-3:2004(en)ICS33.180.20
EUROPEAN STANDARD
EN 62148-3 NORME EUROPÉENNE EUROPÄISCHE NORM
April 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62148-3:2003 E
ICS 33.180.20
English version
Fibre optic active components and devices -
Package and interface standards Part 3: SFF MT-RJ 20-pin transceivers (IEC 62148-3:2003)
Composants et dispositifs actifs
en fibres optiques -
Normes de boîtier et d'interface Partie 3: Emetteurs-récepteurs
SFF MT-RJ à 20 broches (CEI 62148-3:2003)
Aktive Lichtwellenleiterbauelemente
und -geräte -
Gehäuse- und Schnittstellennormen Teil 3: Sende- und Empfangsmodule
des Typs SFF MT-RJ mit 20 Anschlüssen(IEC 62148-3:2003)
This European Standard was approved by CENELEC on 2003-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
EN 62148-3:2003 - 2 - Foreword The text of document 86C/488/FDIS, future edition 1 of IEC 62148-3, prepared by SC 86C, Fibre optic systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62148-3 on 2003-03-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2003-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2006-03-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative. Annex ZA has been added by CENELEC.
This standard constitutes Part 3 of the EN 62148 series, published under the general title Fibre optic active components and devices - Package and interface standards. This series consists of Part 1, devoted to general requirements, and various parts specific to individual module families.
Part 1: General and guidance Part 2: SFF MT-RJ 10-pin transceivers Part 3: SFF MT-RJ 20-pin transceivers Part 4: PN 1x9 plastic optical fibre transceivers Part 5: SC 1x9 fibre optic modules Part 6:
ATM-PON transceivers Part 7: SFF LC 10-pin transceivers Part 8: SFF LC 20-pin transceivers Part 9: SFF MU duplex 10-pin transceivers Part 10:
SFF MU duplex 20-pin transceivers Part 11: 14-pin modulator-integrated laser diode modules __________ Endorsement notice The text of the International Standard IEC 62148-3:2003 was approved by CENELEC as a European Standard without any modification. __________
- 3 - EN 62148-3:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61754-18 - 1) Fibre optic connector interfaces Part 18: Type MT-RJ connector family
EN 61754-18 + corr. April 2002 2) 2002 IEC 62148-1 - 1) Fibre optic active components and devices - Package and interface standards Part 1: General and guidance EN 62148-1 2002 2)
1) Undated reference. 2) Valid edition at date of issue.
NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD62148-3Première éditionFirst edition2003-02Composants et dispositifs actifsen fibres optiques
–Normes de boîtier et d'interface –Partie 3:Emetteurs-récepteurs SFF MT-RJ à 20 brochesFibre optic active components and devices –Package and interface standards –Part 3:SFF MT-RJ 20-pin transceiversPour prix, voir catalogue en vigueurFor price, see current catalogue© IEC 2003
Droits de reproduction réservés
⎯
Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucun procédé,électronique ou mécanique, y compris la photocopie et lesmicrofilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized in anyform or by any means, electronic or mechanical, includingphotocopying and microfilm, without permission in writing fromthe publisher.International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11
Telefax: +41 22 919 03 00
E-mail: inmail@iec.ch
Web: www.iec.chCODE PRIXPRICE CODELCommission Electrotechnique InternationaleInternational Electrotechnical Commission
62148-3 © IEC:2003– 3 –CONTENTSFOREWORD.5INTRODUCTION.91Scope.112Normative references.113Definition and abbreviation.113.1Definition.113.2Abbreviation.114Classification.115Specification of fibre optic transceiver modules.136Electrical interface.136.1General.136.2Numbering of electrical terminals.136.3Electrical terminal assignment.157Outline and footprint.177.1Drawings of case outline.177.2Optical receptacle MT-RJ style.197.3Drawings of case footprint.21Figure 1 – Electrical terminal numbering assignments (viewed from above with pinsunderneath).13Figure 2 – Case outline.19Figure 3 – Case footprint.23Table 1 – Transceiver receiver pin-function definitions.15Table 2 – Transceiver transmitter pin-function definitions.15
62148-3 © IEC:2003– 5 –INTERNATIONAL ELECTROTECHNICAL COMMISSION____________FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –PACKAGE AND INTERFACE STANDARDS –Part 3: SFF MT-RJ 20-pin transceiversFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with maypar
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.