iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

kSIST FprEN 415-8:2024

(Main)

Safety of packaging machines - Part 8: Strapping machines

Safety of packaging machines - Part 8: Strapping machines

Scope is preliminary (to be discussed/reviewed in detail by WG10 later), based on the one from existing standard:
-   powered hand strapping tools;
-   semi-automatic strapping machines;
-   automatic strapping machines;
-   horizontal pallet strapping machines;
-   vertical pallet strapping machines
Remark: Exclusions not listed here.

Sicherheit von Verpackungsmaschinen - Teil 8: Umreifungsmaschinen

Sécurité des machines d'emballage - Partie 8: Cercleuses

Varnost pakirnih strojev - 8. del: Stroji za pakiranje s trakovi

General Information

Status
Not Published
Public Enquiry End Date
29-Apr-2022
ICS
55.200 - Packaging machinery
Technical Committee
DTN - Lift and transport appliances
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
16-Oct-2024
Due Date
04-Dec-2024
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
FprEN 415-8 - Safety of packaging machines - Part 8: Strapping machines

Relations

Revised
SIST EN 415-8:2008 - Safety of packaging machines - Part 8: Strapping machines
Effective Date
19-Jan-2023
Revised
SIST EN 415-8:2008 - Safety of packaging machines - Part 8: Strapping machines
Effective Date
18-Jan-2023
Revised
SIST EN 415-8:2008 - Safety of packaging machines - Part 8: Strapping machines
Effective Date
21-Feb-2018

Buy Standard

prEN 415-8:2022 - BARVEprEN 415-8:2022 - BARVE
PreviousNext
Draft
prEN 415-8:2022 - BARVE
English language
61 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN 415-8:2022
01-april-2022
Varnost pakirnih strojev - 8. del: Stroji za pakiranje s trakovi
Safety of packaging machines - Part 8: Strapping machines
Sicherheit von Verpackungsmaschinen - Teil 8: Umreifungsmaschinen
Sécurité des machines d'emballage - Partie 8: Cercleuses
Ta slovenski standard je istoveten z: prEN 415-8
ICS:
55.200 Pakirni stroji Packaging machinery
oSIST prEN 415-8:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 415-8:2022
oSIST prEN 415-8:2022
DRAFT
EUROPEAN STANDARD
prEN 415-8
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2022
ICS 55.200 Will supersede EN 415-8:2008
English Version
Safety of packaging machines - Part 8: Strapping machines
Sécurité des machines d'emballage - Partie 8: Sicherheit von Verpackungsmaschinen - Teil 8:
Cercleuses Umreifungsmaschinen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 146.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 415-8:2022 E
worldwide for CEN national Members.

oSIST prEN 415-8:2022
prEN 415-8:2022(E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
3.1 Definitions of general terms . 8
3.2 Definitions of machines covered by this document . 10
4 Safety requirements . 17
4.1 General requirements . 17
4.1.1 Introduction . 17
4.1.2 Requirements to achieve an acceptable risk reduction . 17
4.1.3 Reduction of hazards from electrical equipment . 18
4.1.4 Reduction of hazards generated by the control system . 18
4.1.5 Reduction of thermal hazards . 18
4.1.6 Reduction of noise hazards . 18
4.1.7 Reduction of ergonomic hazards . 19
4.1.8 Reduction of hygiene risks . 19
4.2 Requirements for typical elements or processes of strapping machines . 19
4.2.1 Pneumatic and hydraulic equipment. 19
4.2.2 Reduction of risks generated by products and materials . 19
4.2.3 Reduction of risks generated by strapped products . 19
4.2.4 Reduction of risks generated by strap. 19
4.3 Requirements for common mechanisms on strapping machines . 20
4.3.1 Strap dispenser . 20
4.3.2 Strap feeding mechanism . 20
4.3.3 Strap gripping mechanism . 20
4.3.4 Strap retraction mechanism . 20
4.3.5 Strap tension mechanism . 21
4.3.6 Strap cutting mechanism . 21
4.3.7 Strap sealing mechanism. 21
4.3.8 Strap tension . 21
4.4 Requirements on powered hand strapping tools . 21
4.4.1 General . 21
4.4.2 Powered mechanisms . 22
4.4.3 Controls . 22
4.4.4 Vibration . 22
4.4.5 Ergonomic design principles . 23
4.5 Requirements on semiautomatic strapping machine . 23
4.5.1 General . 23
4.5.2 Strap dispenser . 23
4.5.3 Strapping head . 23
4.5.4 Strap feeding mechanism . 23
4.5.5 Compression mechanisms . 23
4.5.6 Integrity of safety related control systems . 25
oSIST prEN 415-8:2022
prEN 415-8:2022(E)
4.6 Requirements on an automatic strapping machine . 25
4.6.1 General . 25
4.6.2 Strap dispenser. 25
4.6.3 Strapping head . 26
4.6.4 Strap feeding mechanism . 26
4.6.5 Strap chute . 26
4.6.6 Product conveyors. 26
4.6.7 Product positioning and compression mechanisms . 26
4.6.8 Turntable . 26
4.6.9 Integrity of safety related control systems . 27
4.7 Requirements on horizontal pallet strapping machine . 27
4.7.1 General . 27
4.7.2 Strap dispenser. 28
4.7.3 Strapping head . 28
4.7.4 Strap chute assembly . 28
4.7.5 Strap chute raise and lower mechanism . 28
4.7.6 Product positioning and compression mechanisms . 31
4.7.7 Product conveyor. 31
4.7.8 Integrity of safety related control systems . 31
4.8 Requirements on vertical pallet strapping machine . 32
4.8.1 General . 32
4.8.2 Strap dispenser. 32
4.8.3 Vertical strap chute . 33
4.8.4 Strapping head . 33
4.8.5 Raise and lower mechanism (pressure mechanism) . 33
4.8.6 Strap bayonet . 33
4.8.7 Product positioning mechanism . 33
4.8.8 Product conveyor. 33
4.8.9 Turntable . 33
4.8.10 Safety functions / Integrity of safety related control systems . 34
4.9 Requirements on needle strapping machine . 34
4.9.1 General . 34
4.9.2 Strap dispenser. 36
4.9.3 Strapping he
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 415-11:2021(Main)
Safety of packaging machines - Part 11: Determination of efficiency and availability
EN 415-11:2021

This document is applicable for packaging machines falling within the scope of EN 415-1, referred to in the following as "machine systems". This document can also be applied by analogy to other related processing machines.
This document does not contain safety requirements.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 415-3:2021(Main)
Safety of packaging machines - Part 3: Form, fill and seal machines; fill and seal machines
EN 415-3:2021

This document establishes safety requirements for the main types of form, fill and seal machines, fill and seal machines and auger fillers, volumetric cup fillers, nett weighers and multi-head weighers which are frequently fitted to these machines.
Form fill and seal machines:
-   flow wrapping machine;
-   vertical form, fill and seal machine;
-   horizontal sachet form, fill and seal machine;
-   thermoform, fill and seal machine;
-   tubular bag form, fill and seal machine;
-   mandrel form, fill and seal machine.
Fill and seal machines:
-   pre-made bag, erect, fill and seal machine;
-   cup or tub fill and seal machine;
-   sack fill and seal machine.
Filling machines commonly fitted to form, fill and seal machines and fill and seal machines:
-   auger filler;
-   volumetric cup filler;
-   nett weigher;
-   multi-head weigher.
Other types of form, fill and seal machine which are described in 3.3 have similar hazards to these machines and Clause 4 indicates which clauses of this standard are applicable to these machines.
This document covers the safety requirements for machine design, construction and all phases of life of the machines including installation, commissioning, operation, adjustment, maintenance and cleaning.
This document applies to machines manufactured after the date of issue of this document.
Exclusions
This standard does not apply to:
-   blow mould fill and seal machines;
-   bulk container fill and seal machines;
-   cartoning machines;
-   food depositors, including volumetric piston depositors;
-   thermoforming machines.
This document does consider hazards due to dust from the products being packed in these machines and modified atmosphere gases, but does not consider other hazards caused by the product being packed.

  • Standard
    127 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 415-1:2014(Main)
Safety of packaging machines - Part 1: Terminology and classification of packaging machines and associated equipment
EN 415-1:2014

EN 415-1 defines the field of packaging machines. The machines defined fall within the following general groups: - filling machines; - closing machines; - labelling, decorating and coding machines; - cleaning, sterilizing, cooling and drying machines; - fill and seal machines; - inspection machines; - container and packaging component handling machines; - form, fill and seal machines; - carton erecting, carton closing and cartoning machines; - wrapping machines; - group or secondary packaging machines; - palletizers, depalletizers and ancillary equipment; - pallet wrapping machines; - strapping machines. This part of EN 415 indicates the relevant machine specific part of EN 415, or another relevant standard, where safety requirements for dealing with the hazards associated with these machines can be found.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 415-10:2014(Main)
Safety of packaging machines - Part 10: General Requirements
EN 415-10:2014

EN 415-10 gives general requirements for packaging machines which are defined in the scope of EN 415-1 or are in the scope of another relevant machine specific part of EN 415. When used together with a relevant machine specific part of EN 415, it gives the requirements for that specific type of machine. This document deals with safety requirements and their verification for design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of packaging machines when used as intended and under the conditions of misuse foreseeable by a manufacturer. The extent to which hazards, hazardous situations and events are covered is indicated in Clause 4. The hazards on a specific machine can vary depending on its working principle; the type, size and mass of the product; the packaging material; auxiliary equipment attached to the machine and the environment in which the machine is used. If the machine presents hazards that are not dealt with in this standard, the manufacturer should assess these hazards by using the principles detailed in EN ISO 12100:2010. Such deviations or additions are outside the scope of this standard. Exclusions This European Standard is not applicable to the following: - machines that were manufactured before the date of publication of this document by CEN. This standard does not consider the following: - the risk resulting from the use of machines in public accessed areas. NOTE For machines used in public accessed areas different or additional requirements can apply. It is the responsibility of the manufacturer to identify such additional risks, which are outside the scope of this standard or such deviating risks which arise from this specific use, and provide suitable protective measures in accordance with EN ISO 12100. - the use of packaging machines in potentially explosive atmospheres; - specific health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject; - hazards that may be associated with decommissioning packaging machines.

  • Standard
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 415-6:2013(Main)
Safety of packaging machines - Part 6: Pallet wrapping machines
EN 415-6:2013

This standard applies to the following groups of machines: - pallet banding machines; - stretch film pallet wrapping machines; - stretch film hood application machines; - mobile stretch film wrapping machines; - semi automatic self driving stretch film wrapping machines; - shrink film pallet wrapping machines; - shrink film hood application machines; - film removing machines; - shrinking systems; - sleeve wrapping machines for product greater than 400 mm in one direction; - product centralising machines. The individual machines are described in 3.2. This standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of pallet wrapping machines.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 415-5:2006+A1:2010(Main)
Safety of packaging machines - Part 5: Wrapping machines
EN 415-5:2006+A1:2009

This European Standard applies to the following groups of machines: wrapping machines which partially wrap products (see Figures 1-4) wrapping machines which form a complete wrap without sealing (see Figures 5-7) wrapping machines which form a complete wrap with sealing (see Figures 8-14) shrinking equipment which is connected to wrapping machines covered by this standard (see Figures 15- 16) The individual machines are described in 3.2 of this standard. This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of wrapping machines. The extent to which hazards, hazardous situations and events are covered are indicated in Clause 4 of this document. Exclusions: This standard is not applicable to larger examples of wrapping machines designed to handle products higher than 400 mm and wider than 400 mm. These machines are covered by EN 415-6. This document is not applicable to wrapping machines which are manufactured before the date of publication of this document by CEN. This standard does not consider the following hazards: . Use of wrapping machines in potentially explosive atmospheres; . Health, safety or hygiene hazards associated with the products that may be handled by the machines but does include general advice on this subject; . Hazards that may be associated with electromagnetic emissions from wrapping machines; . Hazards that may be associated with decommissioning wrapping machines. 2 Normative references The following referenced documents are indispensable for the application of this document.

  • Standard
    104 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 415-9:2010
Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
EN 415-9:2009

This standard specifies all the information necessary to carry out efficiently and under defined conditions the determination, information and verification of airborne noise emission from packaging machine covered by EN 415-1. This measurement method specifies procedures for the determination of emission sound pressure levels at work station, at other specified positions and the sound power level on the basis of both the sound pressure level method and the sound intensity method. It also specifies installation and operating conditions. This standard applies to machines covered by EN 415-1 as well as for any other packaging machine which are not covered by any other specific noise test code as well as for machines being part of packaging line. In such cases, all information relating to the assembly, installation and to the operating conditions as well as the arrangement of the work station shall be recorded and reported in the test report. Noise emission characteristics include the following data: emission sound pressure level at work station and at other specified positions; sound power emitted by machine. Both can be used: to determine the noise emitted by machine; to inform on the noise emitted by the machine; to verify the noise emitted by the machine. Noise emission values permit comparison of packaging machines on the market. The use of this standard ensures the reproducibility of the determination of the characteristic noise emissions values within specific limits which will be determined by the grade of accuracy of the noise emission measuring method used.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 415-7:2007+A1:2008(Main)
Safety of packaging machines - Part 7: Group and secondary packaging machines
EN 415-7:2006+A1:2008

This European Standard applies to the following groups of machines:
Group and secondary packaging machines and the collating systems associated with them.
The individual machines are described in 3.2 of this European Standard.
This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of group and secondary packaging machines.
The extent to which hazards, hazardous situations and events are covered, are indicated in Clause 4.
Exclusions
This European Standard is not applicable to the following machines:
-   machines that were manufactured before the date of publication of this document by CEN;
-   strapping machines. These machines are covered by EN 415-8;
-   crate loaders and un-loaders for pre-formed rigid containers. These machines are covered by
EN 415-2;
-   cartoning machines. Cartoning machines are covered by EN 415-3.
This European Standard does not consider the following hazards:
-   use of group and secondary packaging machines in potentially explosive atmospheres;
-   health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject;
-   hazards that may be associated with electromagnetic emissions from group and secondary packaging machines;
-   hazards that may be associated with decommissioning group and secondary packaging machines.

  • Standard
    105 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 415-8:2008(Main)
Safety of packaging machines - Part 8: Strapping machines
EN 415-8:2008

This standard applies to the following groups of machines:
3   Powered strapping tools;
3   Semi-automatic strapping machines;
3   Automatic strapping machines;
3   Horizontal pallet strapping machines;
3   Vertical pallet strapping machines.
The individual machines are described in subclause 3.2 of this standard.
This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of strapping machines.
The extents to which hazards, hazardous situations and events are covered are indicated in clause 4 of this document.
Exclusions
This standard is not applicable to the following machines:
3   strapping tools that are powered exclusively by manual effort;
3   strapping machines that were manufactured before the date of publication of this document by CEN;
This standard does not consider the following hazards:
3   the use of strapping  machines in potentially explosive atmospheres;
3   the health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject;
3   hazards that may be associated with electromagnetic emissions from strapping machines;
3   hazards that may be associated with decommissioning strapping machines.

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 415-4:1999/AC:2003(Amendment)
Safety of packaging machines - Part 4: Palletisers and depalletisers
EN 415-4:1997/AC:2002

TC - Modification of cross reference to 4.2.1 in 5.3.2.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day