SIST EN 3338:2006

Aerospace series - Aluminium alloy AL-P7050 - T74511 - Extruded bar and section - a or D <or= 150 mm with peripheral coarse grain control

This standard specifies the requirements relating to:
Aluminium alloy AL-P7050-
T74511
Extruded bar and section
a or D < or =150 mm
with peripheral coarse grain control
for aerospace application.
This standard may also be used to supply material in the T74510 condition if specified by the purchaser on the order and the product is marked accordingly.

Luft- und Raumfahrt - Aluminiumlegierung AL-P7050-T74511 - Stranggepresste Stangen und Profile - a oder D <or= 150 mm mit Kontrolle der Grobkornrandzone

Diese Norm legt die Anforderungen an
Aluminiumlegierung AL-P7050
T74511
Stranggepresste Stangen und Profile
a oder D L 150 mm
mit Kontrolle der Grobkornrandzone
für Anwendungen in der Luft- und Raumfahrt fest.
Diese Norm kann auch für die Lieferung des Werkstoffs im Zustand T74510 verwendet werden, wenn der Käufer dies in der Bestellung angibt und das Halbzeug entsprechend gekennzeichnet ist.

Série aérospatiale - Alliage d'aluminium AL-P7050 - T74511 - Barres et profilés filés - a ou D <or= 150 mm avec contrôle de la zone périphérique a gros grains

Aeronavtika – Aluminijeva zlitina AL-P7050 - T74511 – Iztiskane palice in profili - a ali D ? 150 mm s kontrolo debelozrnatega obrobja

General Information

• Status: Published
• Publication Date: 30-Jun-2006
• ICS: 49.025.20 - Aluminium
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jul-2006
• Due Date: 01-Jul-2006
• Completion Date: 01-Jul-2006
• Ref Project: EN 3338:2005 - Aerospace series - Aluminium alloy AL-P7050 - T74511 - Extruded bar and section - a or D <or= 150 mm with peripheral coarse grain control

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3338:2006
01-julij-2006
Aeronavtika – Aluminijeva zlitina AL-P7050 - T74511 – Iztiskane palice in profili - a
ali D ? 150 mm s kontrolo debelozrnatega obrobja
Aerospace series - Aluminium alloy AL-P7050 - T74511 - Extruded bar and section - a or
D Luft- und Raumfahrt - Aluminiumlegierung AL-P7050-T74511 - Stranggepresste Stangen
und Profile - a oder D Série aérospatiale - Alliage d'aluminium AL-P7050 - T74511 - Barres et profilés filés - a
ou D Ta slovenski standard je istoveten z: EN 3338:2005
ICS:
49.025.20 Aluminij Aluminium
SIST EN 3338:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3338:2006

---------------------- Page: 2 ----------------------

SIST EN 3338:2006


EUROPEAN STANDARD EN 3338

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2005
ICS 49.025.20
English Version
Aerospace series - Aluminium alloy AL-P7050 - T74511 -
Extruded bar and section - a or D ≤ 150 mm with peripheral
coarse grain control
Série aérospatiale - Alliage d'aluminium AL-P7050 - Luft- und Raumfahrt - Aluminiumlegierung AL-P7050 -
T74511 - Barres et profilés filés - a ou D ≤ 150 mm avec T74511 - Stranggepreßte Stangen und Profile - a oder D ≤
contrôle de la zone périphérique à gros grains 150 mm mit Kontrolle der Grobkornrandzone
This European Standard was approved by CEN on 19 September 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3338:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3338:2006
EN 3338:2005 (E)
Contents Page
Foreword .3
Introduction.4
1 Scope.4
2 Normative references.4

2

---------------------- Page: 4 ----------------------

SIST EN 3338:2006
EN 3338:2005 (E)
Foreword
This European Standard (EN 3338:2005) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the
latest by April 2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this Eu
...