Measurement microphones - Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison

This part of the IEC 61094 series is applicable to working standard microphones meeting the requirements of IEC 61094-4. It describes methods of determining the free-field sensitivity by comparison with a laboratory standard microphone or working standard microphone (where applicable) that has been calibrated according to either:
– IEC 61094-3,
– IEC 61094-2 or IEC 61094-5, and where factors given in IEC/TS 61094-7 have been applied,
– IEC 61094-6,
– this part of IEC 61094.
Methods performed in an acoustical environment that is a good approximation to an ideal free-field (e.g. a high quality free-field chamber), and methods that use post processing of results to minimise the effect of imperfections in the acoustical environment, to simulate freefield conditions, are both covered by this part of IEC 61094. Comparison methods based on the principles described in IEC 61094-3 are also possible but beyond the scope of this part of IEC 61094.

Messmikrofone - Teil 8: Verfahren zur Ermittlung des Freifeld-Übertragungskoeffizienten von Gebrauchs-Normalmikrofonen nach der Vergleichsmethode

Microphones de mesure - Partie 8: Méthodes pour la détermination de l'efficacité en champ libre par comparaison des microphones étalons de travail

Merilni mikrofoni - 8. del: Metode za določanje primerjalne občutljivosti v odprtem prostoru delovnih mikrofonov

Ta del skupine standardov IEC 61094 se uporablja za delovne mikrofone, ki izpolnjujejo zahteve iz standarda IEC 61094-4. Opisuje metode za ugotavljanje občutljivosti v odprtem prostoru s primerjavo z laboratorijskim standardnim mikrofonom ali delovnim mikrofonom (kjer je to primerno), ki je bil umerjen v skladu s:
– standardom IEC 61094-3,
– standardom IEC 61094-2 ali IEC 61094-5, pri čemer so bili uporabljeni faktorji iz standarda IEC/TS 61094-7,
– standardom IEC 61094-6,
– tem delom standarda IEC 61094.
Ta del standarda IEC 61094 zajema metode, ki se izvajajo v akustičnem okolju, ki je dober približek idealnemu prostemu zvočnemu polju (npr. visokokakovostna gluha komora), in metode, pri katerih se rezultati naknadno prilagodijo, da se čim bolj zmanjša učinek nepravilnosti v akustičnem okolju, s čimer se simulirajo pogoji prostega zvočnega polja. Možne so tudi primerjalne metode, ki temeljijo na načelih iz standarda IEC 61094-3, vendar ne spadajo na področje uporabe tega dela standarda IEC 61094.

General Information

Status
Published
Publication Date
30-Jul-2013
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Jul-2013
Due Date
28-Sep-2013
Completion Date
31-Jul-2013

Relations

Buy Standard

Corrigendum
EN 61094-8:2013/AC:2013
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Messmikrofone - Teil 8: Verfahren zur Ermittlung des Freifeld-Übertragungskoeffizienten von Gebrauchs-Normalmikrofonen nach der VergleichsmethodeMicrophones de mesure - Partie 8: Méthodes pour la détermination de l'efficacité en champ libre par comparaison des microphones étalons de travailMeasurement microphones - Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison33.160.50PriborAccessories17.140.50ElektroakustikaElectroacousticsICS:Ta slovenski standard je istoveten z:EN 61094-8:2012/AC:2013SIST EN 61094-8:2013/AC:2013en01-september-2013SIST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.