SIST EN 62149-9:2014

Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers

EN IEC 62149-9 covers the performance specification for seeded reflective semiconductor optical amplifier (RSOA) transceivers used for the fibre optic telecommunication and optical data transmission applications. The performance standard contains a definition of the product performance requirements together with a series of sets of tests and measurements with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be run on a “once-off” basis to prove any product’s ability to satisfy the performance standard’s requirements. A product that has been shown to meet all the requirements of a performance standard can be declared as complying with the performance standard, but should then be controlled by a quality assurance/quality conformance program.

Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten – Teil 9: Injizierte reflektierende optische Halbleiterverstärker-Sende- und Empfangsmodule

Composants et dispositifs actifs à fibres optiques - Normes de performances - Partie 9: Émetteurs-récepteurs amplificateurs optiques à semiconducteurs réfléchissants répartis

L'IEC 62149-9:2014 couvre la spécification de performance des émetteurs-récepteurs amplificateurs optiques à semiconducteurs réfléchissants (RSOA) répartis utilisés pour les applications de télécommunication à fibres optiques et de transmission de données par moyen optique. La norme de performance contient une définition des exigences de performance de produit ainsi qu'une série de jeux d'essais et de mesures avec des conditions, sévérités et critères d'acceptation/de refus bien définis. Les essais sont destinés à être effectués une seule fois, pour prouver la capacité du produit à satisfaire aux exigences des normes de performance. Un produit dont on a montré qu'il remplissait toutes les exigences d'une norme de performance peut être déclaré comme conforme à une norme de performance, mais il convient qu'il soit ensuite contrôlé selon un programme d'assurance de la qualité/de conformité de la qualité. Mots clés : émetteurs-récepteurs amplificateurs optiques à semiconducteurs réfléchissants (RSOA) répartis

Aktivne komponente in naprave optičnih vlaken - Izvedbeni standardi - 9. del: Oddajno-sprejemni moduli z dopiranimi odsevnimi polprevodniškimi optičnimi ojačevalniki (IEC 62149-9:2014)

Standard EN IEC 62149-9 obravnava izvedbeno specifikacijo za oddajno-sprejemne module z dopiranimi odsevnimi polprevodniškimi optičnimi ojačevalniki (RSOA) za uporabo na področju telekomunikacij z optičnimi vlakni in optičnega prenosa podatkov. Izvedbeni standard vsebuje opredelitev zahtev glede zmogljivosti za izdelek skupaj z naborom serij preskusov in meritev z jasno določenimi pogoji, stopnjami zahtevnosti in merili za uspešno/neuspešno opravljen preskus. Preskusi so namenjeni enkratnemu izvajanju, z njimi pa se dokaže, ali lahko izdelek izpolnjuje zahteve tehničnega standarda. Izdelek, ki dokazano izpolnjuje vse zahteve izvedbenega standarda, je mogoče šteti za skladen z izvedbenim standardom, vendar naj bi ga v tem primeru nadzoroval program za zagotavljanje skladnosti/skladnost s kakovostjo.

General Information

• Status: Published
• Publication Date: 18-Aug-2014
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 14-Aug-2014
• Due Date: 19-Oct-2014
• Completion Date: 19-Aug-2014
• Ref Project: EN 62149-9:2014 - Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62149-9:2014
01-oktober-2014
$NWLYQHNRPSRQHQWHLQQDSUDYHRSWLþQLKYODNHQ,]YHGEHQLVWDQGDUGLGHO
2GGDMQRVSUHMHPQLPRGXOL]GRSLUDQLPLRGVHYQLPLSROSUHYRGQLãNLPLRSWLþQLPL
RMDþHYDOQLNL,(&
Fibre optic active components and devices - Performance standards - Part 9: Seeded
reflective semiconductor optical amplifier transceivers
Ta slovenski standard je istoveten z: EN 62149-9:2014
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 62149-9:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62149-9:2014

---------------------- Page: 2 ----------------------

SIST EN 62149-9:2014


EUROPEAN STANDARD EN 62149-9

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2014
ICS 33.180.20

English Version
Fibre optic active components and devices - Performance
standards - Part 9: Seeded reflective semiconductor optical
amplifier transceivers
(IEC 62149-9:2014)
Composants et dispositifs actifs à fibres optiques - Normes Aktive Lichtwellenleiterbauelemente und geräte -
de performances - Partie 9: Émetteurs-récepteurs Betriebsverhalten - Teil 9: Injizierte reflektierende optische
amplificateurs optiques à semiconducteurs réfléchissants Halbleiterverstärker-Sende- und Empfangsmodule
répartis (IEC 62149-9:2014)
(CEI 62149-9:2014)
This European Standard was approved by CENELEC on 2014-05-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62149-9:2014 E

---------------------- Page: 3 ----------------------

SIST EN 62149-9:2014
EN 62149-9:2014 - 2 -
Foreword
The text of document 86C/1145/CDV, future edition 1 of IEC 62149-9, prepared by SC 86C, "Fibre optic
systems and active devices", of IEC TC 86, "Fibre optics" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 62149-9:2014.
The following dates are fixed:
(dop) 2015-02-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-05-29
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62149-9:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 60191 (all parts) NOTE Harmonized as EN 60191 (all parts).
IEC 60747-5-1 NOTE Harmonized as EN 60747-5-1.
IEC 60749 (all parts) NOTE Harmonized as EN 60749 (all parts).
IEC 60825 (all parts) NOTE Harmonized as EN 60825 (all parts).
IEC 60874 (all parts) NOTE Harmonized as EN 60874 (all parts).
IEC 61290-1-3 NOTE Harmonized as EN 61290-1-3.
IEC 62007-1 NOTE Harmonized as EN 62007-1.
IEC 62007-2 NOTE Harmonized as EN 62007-2.
IEC 62148-1 NOTE Harmonized as EN 62148-1.
IEC 62149-1 NOTE Harmonized as EN 62149-1.
IEC 62149-4 NOTE Harmonized as EN 62149-4.

---------------------- Page: 4 ----------------------

SIST EN 62149-9:2014
- 3 - EN 62149-9:2014

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by
(mod), the relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-6 -  Environmental testing -- Part 2-6: Tests - EN 60068-2-6 -
Test Fc: Vibration (sinusoidal)
IEC 60068-2-20 -  Environmental testing -- Part 2-20: Tests - EN 60068-2-20 -
Test T: Test methods for solderability and
resistance to soldering heat of devices with
leads
IEC 60068-2-27 -  Environmental testing -- Part 2-27: Tests - EN 60068-2-27 -
Test Ea and guidance: Shock
IEC 60068-2-38 -  Environmental testing -- Part 2-38: Tests - EN 60068-2-38 -
Test Z/AD: Composite temperature/humidity
cyclic test
IEC 60068-2-78 -  Environmental testing -- Part 2-78: Tests - EN 60068-2-78 -
Test Cab: Damp heat, steady state
IEC 60749-25 -  Semiconductor devices - Mechanical and EN 60749-25 -
climatic test methods -- Part 25:
Temperature cycling
IEC 60749-26 -  Semiconductor devices - Mechanical and EN 60749-26 -
climatic test methods -- Part 26: Electrostatic
discharge (ESD) sensitivity testing - Human
body model (HBM)
2) 1)
IEC 60825-1 -  Safety of laser products -- Part 1: Equipment EN 60825-1 -
classification and requirements
2) 3)
IEC 60950-1 (mod) -  Information technology equipment - Safety -- EN 60950-1 2006
Part 1: General requirements
3)
  +A11 2009
3)
  + A1 2010
3)
  +A12 2011
3)
  +AC 2011
3)
  + A2 2013
IEC 61300-2-47 -  Fibre optic interconnecting devices and EN 61300-2-47 -
passive components - Basic test and
measurement procedures -- Part 2-47: Tests
- Thermal shocks
IEC Guide 107 -  Electromagnetic compatibility - Guide to the - -
drafting of electromagnetic compatibility
publications
ITU-T 2012 Multichannel seeded DWDM applications -
Recommendation with single channel optical interfaces
G.698.3

---------------------- Page: 5 ----------------------

SIST EN 62149-9:2014
EN 62149-9:2014 - 4 -
ITU-T 2006 Optical interface for single channel STM-64 -
Recommendation and other SDH systems with optical
G.691 amplifiers

1)
prEN at date of issue.
2)
Undated reference.
3)
Valid edition at date of issue.

---------------------- Page: 6 ----------------------

SIST EN 62149-9:2014



IEC 62149-9

®


Edition 1.0 2014-04




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Fibre optic active components and devices – Performance standards –

Part 9: Seeded reflective semiconductor optical amplifier transceivers




Composants et dispositifs actifs à fibres optiques – Normes de performances –

Partie 9: Émetteurs-récepteurs amplificateurs optiques à semiconducteurs

réfléchissants répartis















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX Q


ICS 33.180.20 ISBN 978-2-8322-1542-5



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 62149-9:2014
– 2 – IEC 62149-9:2014 © IEC 2014
CONTENTS

FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and abbreviations . 7
3.1 Terms and definitions. 7
3.2 Symbols and abbreviations . 7
4 Product parameters . 8
4.1 Absolute limiting ratings . 8
4.2 Operating environment . 8
4.3 Functional specification . 9
5 Testing . 9
5.1 General . 9
5.2 Characterization testing . 9
5.3 Performance testing . 9
6 Environmental specifications . 9
6.1 General safety . 9
6.2 Laser safety . 9
6.3 Electromagnetic compatibility (EMC) requirements . 9
Annex A (normative) Specifications for seeded RSOA transceivers . 10
A.1 Absolute limiting ratings . 10
A.2 Operating environment . 10
A.3 Functional specification . 10
A.4 Diagrams . 11
A.5 Labelling . 12
A.6 Testing . 12
A.6.1 General . 12
A.6.2 Characterization testing . 12
A.6.3 Performance testing . 13
Annex B (normative) Sample size, sequencing and grouping requirements . 15
Bibliography . 16

Figure 1 – Seeded DWDM transmission based on RSOA transceivers . 5
Figure A.1 – Receiver section schematic . 12
Figure A.2 – Transmitter section schematic . 12

Table 1 – Operating environment . 8
Table A.1 – Absolute limiting ratings . 10
Table A.2 – Receiver section: functional specification . 10
Table A.3 – Transmitter section: functional specification . 11
Table A.4 – Transmitter section characterization tests . 13
Table A.5 – Receiver section characterization tests . 13
Table A.6 – Performance test plan . 14
Table B.1 – Sample size, sequencing and grouping requirements . 15

---------------------- Page: 8 ----------------------

SIST EN 62149-9:2014
IEC 62149-9:2014 © IEC 2014 – 3 –
 INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________

FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PERFORMANCE STANDARDS –

Part 9: Seeded reflective semiconductor optical amplifier transceivers

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62149-9 has been prepared by subcommittee 86C: Fibre optic
systems and active devices, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
CDV Report on voting
86C/1145/CDV 86C/1222/RVC

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 9 ----------------------

SIST EN 62149-9:2014
– 4 – IEC 62149-9:2014 © IEC 2014
A list of all parts of the IEC 62149 series, published under the general title Fibre optic active
components and devices – Performance standards, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 10 ----------------------

SIST EN 62149-9:2014
IEC 62149-9:2014 © IEC 2014 – 5 –
INTRODUCTION
Fibre optic laser devices are used to convert electrical signals into optical signals. This part of
IEC 62149 covers the performance specification for seeded reflective semiconductor optical
amplifier (RSOA) transceivers in fibre optic telecommunication and optical data transmission
applications. The optical performance criteria are generally well specified for a number of
internationally agreed applications areas such as ITU-T Recommendation G.698.3. This
standard aims to provide optical interface specifications toward the realization of transversely
compatible seeded dense wavelength division multiplexing (DWDM) systems.
In seeded DWDM systems, seed light sources are used to generate broadband seed lights in
C-band or L-band. After passing through DWDM DeMUXs in the link, the broadband seed
lights are spectrum sliced according to the transmission characteristics of DWDM DeMUXs.
To simplify link implementation, cyclic arrayed waveguide gratings (AWGs) are used as
DWDM MUX/DeMUXs. A characteristic of the cyclic AWG is the periodicity of the frequencies
routed from the common port to a given output port. This periodicity is called the free spectral
range (FSR). The FSR is commonly specified for a centre channel of the AWG. The
connection between the DWDM MUX/DeMUX and RSOA transceiver is bidirectional. Each
spectrum sliced seed light is injected to a RSOA based transceiver. Consequently, an output
signal wavelength of the RSOA transceiver can be determined by a wavelength of an injected
seed light.

λ
λ′
1
1
λ ∼ λ
1 N
λ′
λ
1
1

λ λ′
1 1
λ′
λ
N
N
λ
λ′
N
N
λ′ ∼ λ′
1 N
λ′
λ
N
N
IEC  1186/14

Figure 1 – Seeded DWDM transmission based on RSOA transceivers
Seeded RSOA transceivers for seeded DWDM systems are supplied by different
manufacturers, but do not guarantee operation of seeded RSOA transceivers. Manufacturers
using the standards are responsible for meeting the required performance and/or reliability
and quality assurance under a recognized scheme.

---------------------- Page: 11 ----------------------

SIST EN 62149-9:2014
– 6 – IEC 62149-9:2014 © IEC 2014
FIBRE OPTIC ACTIVE COMPONENTS
...