oSIST prEN ISO 8740:2024
(Main)Fasteners - Parallel grooved pins, with chamfer point - Full-length diamond grooves (ISO/DIS 8740:2023)
Fasteners - Parallel grooved pins, with chamfer point - Full-length diamond grooves (ISO/DIS 8740:2023)
Verbindungselemente - Zylinderkerbstifte mit Fase - Diamant-Nut über die gesamte Länge (ISO/DIS 8740:2023)
Fixations - Goupilles cannelées constantes, à bout chanfreiné - Cannelures diamant sur toute la longueur (ISO/DIS 8740:2023)
La présente Norme internationale prescrit les caractéristiques des goupilles cannelées à chanfrein en acier ou en acier inoxydable austénitique, à trois cannelures constantes sur toute leur longueur, débouchantes d'un côté et régulièrement espacées, de diamètre nominal, d1, de 1,5 mm à 25 mm inclus. Le matériau refoulé de chaque côté des cannelures forme un renflement dont le diamètre d2, supérieur au diamètre nominal d1, permet un ajustement serré de ces goupilles cannelées lorsqu'elles sont emmanchées en force dans un trou de diamètre de perçage égal au diamètre nominal de la goupille d1 (voir article 4).
Vezni elementi - Zatiči z vzporednimi utori s posneto konico - Diamantni utori (žlebiči) po celotni dolžini (ISO/DIS 8740:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 8740:2024
01-februar-2024
Vezni elementi - Zatiči z vzporednimi utori s posneto konico - Diamantni utori
(žlebiči) po celotni dolžini (ISO/DIS 8740:2023)
Fasteners - Parallel grooved pins, with chamfer point - Full-length diamond grooves
(ISO/DIS 8740:2023)
Verbindungselemente - Zylinderkerbstifte mit Fase - Diamant-Nut über die gesamte
Länge (ISO/DIS 8740:2023)
Fixations - Goupilles cannelées constantes, à bout chanfreiné - Cannelures diamant sur
toute la longueur (ISO/DIS 8740:2023)
Ta slovenski standard je istoveten z: prEN ISO 8740
ICS:
21.060.50 Zatiči, žeblji Pins, nails
oSIST prEN ISO 8740:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 8740:2024
---------------------- Page: 2 ----------------------
oSIST prEN ISO 8740:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8740
ISO/TC 2 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-11-30 2024-02-22
Fasteners — Parallel grooved pins, with chamfer point —
Full-length diamond grooves
Fixations — Goupilles cannelées constantes, à bout chanfreiné — Cannelures diamant sur toute la
longueur
ICS: 21.060.50
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 8740:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 8740:2024
ISO/DIS 8740:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8740
ISO/TC 2 Secretariat: DIN
Voting begins on: Voting terminates on:
Fasteners — Parallel grooved pins, with chamfer point —
Full-length diamond grooves
Fixations — Goupilles cannelées constantes, à bout chanfreiné — Cannelures diamant sur toute la
longueur
ICS: 21.060.50
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 8740:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 8740:2024
ISO/DIS 8740:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.