SIST EN 4673-005:2010

Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 005: In heat resisting nickel base alloy NI-P101HT (WASPALOY), silver plating

This European Standard specifies the characteristics of self-locking, inserts for Inch series, self-broaching keys, in NI-P101HT, silver plated, for aerospace applications.
Classification: 1 210 MPa 1) / 760 °C 2)

Luft- und Raumfahrt - Gewindeeinsätze, UNJ-Gewinden, selbstsichernd, mit selbsträumenden Stiften - Teil 005: Mit selbsträumenden Stiften, aus Hochwarmfeste Nickellegierung NI-P101HT (WASPALOY), Versilbern

Diese Norm legt die Eigenschaften von selbstsichernden Gewindeeinsätzen für Inch-Reihen aus NI-P101HT,
versilbert und mit selbsträumenden Stiften für Anwendungen in der Luft- und Raumfahrt fest.
Klasse: 1 210 MPa1) / 760 °C2)

Série aérospatiale - Douilles filetées, à filetage UNJ, à freinage interne, à clavettes auto-brochantes - Partie 005 : En alliage résistant à chaud base nickel NI-P101HT (WASPALOY), argentage

Aeronavtika - Vložki, navoj UNJ, samozapiralni, s samozagozdnim ključem - 005. del: Iz toplotnoodporne zlitine na nikljevi osnovi NI-P101HT (WASPALOY), posrebreni

Ta standard opredeljuje značilnosti samozapiralnih vložkov z MJ navojem, s samozagozdnimi ključi, iz NI-PH2601, posrebrenih, za uporabo v aeronavtiki.
Klasifikacija: 1 210 MPa 1) / 760 °C 2)

General Information

• Status: Published
• Publication Date: 13-Sep-2010
• ICS: 49.030.30 - Nuts
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2010
• Due Date: 06-Nov-2010
• Completion Date: 14-Sep-2010
• Ref Project: EN 4673-005:2010 - Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 005: In heat resisting nickel base alloy NI-P101HT (WASPALOY), silver plating

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.3$/2 STANDARD



SIST EN 4673-005:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4673-005
August 2010 ICS 49.030.30 English Version
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 005: In heat resisting nickel base alloy NI-P101HT (WASPALOY), silver plating
Série aérospatiale - Douilles filetées, à filetage UNJ, à freinage interne, à clavettes auto-brochantes - Partie 005: En alliage résistant à chaud base nickel NI-P101HT (WASPALOY), argentage
Luft- und Raumfahrt - Gewindeeinsätze, UNJ-Gewinden, selbstsichernd, mit selbsträumenden Stiften - Teil 005: Mit selbsträumenden Stiften, aus Hochwarmfeste Nickellegierung NI-P101HT (WASPALOY), Versilbern This European Standard was approved by CEN on 12 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4673-005:2010: ESIST EN 4673-005:2010



EN 4673-005:2010 (E) 2 Contents Page Foreword .3Introduction .41 Scope .42 Normative references .43 Required characteristics .43.1 Configuration – Dimensions – Tolerances – Masses .43.2 Material .53.3 Surface treatment .54 Insert definition .54.1 Normal size insert .64.2 First repair size insert .64.3 Second repair size insert .74.4 External thread dimension .75 Designation .86 Marking .87 Technical specification .8 SIST EN 4673-005:2010



EN 4673-005:2010 (E) 3 Foreword This document (EN 4673-005:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2011, and conflicting national standards shall be withdrawn at the latest by February 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark
...