SIST EN ISO 5263-1:2005

Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps (ISO 5263-1:2004)

ISO 5263-1:2004 specifies an apparatus and the procedure for the laboratory-wet disintegration of chemical pulps. This apparatus and procedure are required for preparation of the test portion in a number of other International Standards dealing with pulps.
In principle, this method is applicable to all kind of chemical pulps, including recovered fibres. It is not suitable for mechanical pulps and some very long-fibred chemical pulps such as those from cotton and similar materials.

Faserstoffe - Nassaufschlagen im Labor - Teil 1: Aufschlagen von Chemiezellstoff (ISO 5263-1:2004)

Dieser Teil der ISO 5263 legt ein Gerät und ein Verfahren zum Nassaufschlagen von Chemiezellstoffen im Labor fest. Das Gerät und das Verfahren werden auch in mehreren anderen Internationalen Normen zum Thema Faserstoffe zur Probenvorbereitung verwendet.
Grundsätzlich ist das Verfahren für alle Chemiezellstoffarten anwendbar - einschließlich Sekundärfaserstoffe. Es ist nicht geeignet für Holzstoffe, Halbzellstoffe, chemischen Holzschliff sowie einige sehr langfaserige Zellstoffe wie solche aus Baumwolle und ähnlichen Materialien.

Pâtes - Désintégration humide en laboratoire - Partie 1: Désintégration des pâtes chimiques (ISO 5263-1:2004)

Vlaknine - Laboratorijsko razvlaknjevanje v mokrem - 1. del: Razvlaknjevanje kemijskih vlaknin (ISO 5263-1:2004)

General Information

• Status: Published
• Publication Date: 31-Jan-2005
• ICS: 85.040 - Pulps
• Technical Committee: VPK - Pulp, paper, board and products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Feb-2005
• Due Date: 01-Feb-2005
• Completion Date: 01-Feb-2005
• Ref Project: EN ISO 5263-1:2004 - Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps (ISO 5263-1:2004)

Relations

• Replaces: SIST EN ISO 5263:2000 - Pulps - Laboratory wet disintegration (ISO 5263:1995)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5263-1:2005
01-februar-2005
1DGRPHãþD
SIST EN ISO 5263:2000
Vlaknine - Laboratorijsko razvlaknjevanje v mokrem - 1. del: Razvlaknjevanje
kemijskih vlaknin (ISO 5263-1:2004)
Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps (ISO 5263
-1:2004)
Faserstoffe - Nassaufschlagen im Labor - Teil 1: Aufschlagen von Chemiezellstoff (ISO
5263-1:2004)
Pâtes - Désintégration humide en laboratoire - Partie 1: Désintégration des pâtes
chimiques (ISO 5263-1:2004)
Ta slovenski standard je istoveten z: EN ISO 5263-1:2004
ICS:
85.040 Vlaknine Pulps
SIST EN ISO 5263-1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 5263-1:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 5263-1:2005
EUROPEAN STANDARD
EN ISO 5263-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2004
ICS 85.040 Supersedes EN ISO 5263:1997
English version
Pulps - Laboratory wet disintegration - Part 1: Disintegration of
chemical pulps (ISO 5263-1:2004)
Pâtes - Désintégration humide en laboratoire - Partie 1:
Désintégration des pâtes chimiques (ISO 5263-1:2004)
This European Standard was approved by CEN on 2 August 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5263-1:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 5263-1:2005
EN ISO 5263-1:2004 (E)


Foreword

This document (EN ISO 5263-1:2004) has been prepared by Technical Committee ISO/TC 6
"Paper, board and pulps" in collaboration with Technical Committee CEN/TC 172 "Pulp, paper
and board", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by March 2005, and conflicting national
standards shall be withdrawn at the latest by March 2005.

This document supersedes EN ISO 5263 :1997.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice

The text of ISO 5263-1:2004 has been approved by CEN as EN ISO 5263-1:2004 without any
modifications.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 5263-1:2005


INTERNATIONAL ISO
STANDARD 5263-1
First edition
2004-09-01


Pulps — Laboratory wet disintegration —
Part 1:
Disintegration of chemical pulps
Pâtes — Désintégration humide en laboratoire —
Partie 1: Désintégration des pâtes chimiques




Reference number
ISO 5263-1:2004(E)
©
ISO 2004

---------------------- Page: 5 ----------------------

SIST EN ISO 5263-1:2005
ISO 5263-1:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2004 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 5263-1:2005
ISO 5263-1:2004(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Normative references . 1
3 Definition. 1
4 Apparatus. 1
5 Preparation of test portion. 2
6 Procedure. 2
7 Test report. 3
Annex A (normative) Construction of the Standard disintegrator . 4
Annex B (normative) Checking the Standard disintegrator. 6

© ISO 2004 – All rights reserved iii

---------------------- Page: 7 ----------------------

SIST EN ISO 5263-1:2005
ISO 5263-1:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 5263-1 was prepared by Technical Committee ISO/TC 6, Paper, board and pulps, Subcommittee SC 5,
Test methods and quality specifications for pulps.
This first edition cancels and replaces ISO 5263:1995 which has been technically revised. In the revision,
ISO 5263 has been divided into three parts; Part 1 which is applicable to chemical pulps, Part 2 which is
applicable to mechanical pulps without latency and Part 3 which is applicable to mechanical pulps exhibiting
latency. In Part 3, an informative Annex has been inserted describing the effect of latency in mechanical pulps.
ISO 5263 consists of the following parts, under the general title Pulps — Laboratory wet disintegration:
— Part 1: Disintegration of chemical pulps
— Part 2: Disintegration of
...