SIST ISO 7415:1996
(Main)Plain washers for high-strength structural bolting, hardened and tempered
Plain washers for high-strength structural bolting, hardened and tempered
Specifies products intended for assembly with large series hexagon bolts and nuts of diameters from M 12 up to and including M 36; includes specifications with reference to International Standards; gives an example for the designation.
Rondelles plates trempées et revenues pour vis à serrage contrôlé pour constructions métalliques
Okrogle podložke - Poboljšane - Za vijačene zveze velike trdnosti v jeklenih konstrukcijah
General Information
Buy Standard
Standards Content (Sample)
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON.ME~YHAPOAHAfl OPTAHM3A~MR IlO CTAH~APTM3AWWORGANlSATlON INTERNATIONALE DE NORMALISATION
Plain washers for high-strength structural bolting,
hardened and tempered
Rondelles plates trempkes et revenues pour vis ii serrage contr&? pour constructions mhtalliques
First edition - 1984-11-01
UDC 621 l 82.4
Ref. No. IS0 7415-1984 (E)
Descriptors : fasteners, washers, plain washers, specifications, dimensions, designation, marking.
Price based on 2 pages
---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Every member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 7415 was prepared by Technical Committee ISO/TC 2,
Fasteners.
0 International Organization for Standardization, 1984
Printed in Switzerland
---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD IS0 74154984 (E)
Plain washers for high-strength structural bolting,
hardened and tempered
2 Reference
0 Introduction
This lnternationai Standard is part of the complete IS0 product
IS0 475913, Tolerances for fasteners - Part 3: Washers for
standard series on hexagon drive fasteners. The series com-
metric bolts, screws and nuts with thread diameters > 1 and
prises :
<15Omm - Product grades A and C.
a) hexagon head bolts (IS0 4014, IS0 4015 and
IS0 4016) ;
b) hexagon head screws (IS0 4017 and IS0 4018); 3 Dimensions
c) hexagon nuts (IS0 4032, IS0 4
...
SLOVENSKI STANDARD
SIST ISO 7415:1996
01-april-1996
2NURJOHSRGORåNH3REROMãDQH=DYLMDþHQH]YH]HYHOLNHWUGQRVWLYMHNOHQLK
NRQVWUXNFLMDK
Plain washers for high-strength structural bolting, hardened and tempered
Rondelles plates trempées et revenues pour vis à serrage contrôlé pour constructions
métalliques
Ta slovenski standard je istoveten z: ISO 7415:1984
ICS:
21.060.30 Podložke, varovalni elementi Washers, locking elements
SIST ISO 7415:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 7415:1996
---------------------- Page: 2 ----------------------
SIST ISO 7415:1996
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON.ME~YHAPOAHAfl OPTAHM3A~MR IlO CTAH~APTM3AWWORGANlSATlON INTERNATIONALE DE NORMALISATION
Plain washers for high-strength structural bolting,
hardened and tempered
Rondelles plates trempkes et revenues pour vis ii serrage contr&? pour constructions mhtalliques
First edition - 1984-11-01
UDC 621 l 82.4
Ref. No. IS0 7415-1984 (E)
Descriptors : fasteners, washers, plain washers, specifications, dimensions, designation, marking.
Price based on 2 pages
---------------------- Page: 3 ----------------------
SIST ISO 7415:1996
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Every member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 7415 was prepared by Technical Committee ISO/TC 2,
Fasteners.
0 International Organization for Standardization, 1984
Printed in Switzerland
---------------------- Page: 4 ----------------------
SIST ISO 7415:1996
INTERNATIONAL STANDARD IS0 74154984 (E)
Plain washers for high-strength structural bolting,
hardened and tempered
2 Reference
0 Introduction
This lnternationai Standard is part of the complete IS0 product
IS0 4759
...
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME~YHAPO~HAR OPTAHMSA~MR IlO CTAHAAPTbl3Al&lM.ORGANISATlON INTERNATIONALE DE NORMALISATION
Rondelles plates trempées et revenues pour vis
à serrage contrôlé pour constructions métalliques
Plain washers for high-strength structural bolting, hardened and tempered
Première édition - 1984-11-01
CDU 621.882.4 Réf. no : ISO 7415-1984 (F)
Gz
Descripteurs : élément de fixation, rondelle, rondelle plate, spécification, dimension, désignation, marquage.
.
LA
z
0
cn
- Prix basé sur 2 pages
---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
créé à cet effet. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants,
La Norme internationale ISO 7415 a été élaborée par le comité technique ISO/TC 2,
&men ts de fixation .
0 Organisation internationale de normalisation, 1984 0
Imprimé en Suisse
---------------------- Page: 2 ----------------------
60 7415-1984 (F)
NORME INTERNATIONALE
Rondelles plates trempées et revenues pour vis
à serrage contrôlé pour constructions métalliques
0 Introduction 2 Référence
La présente Norme internationale fait partie de la série complète
ISO 475913, Tolérances pour les éléments de tïxation -
des normes de produit ISO traitant des éléments de fixation à
Partie 3: Rondelles pour boulons, vis et écrous de diamètre de
entraînement hexagonal. Cette série comprend :
filetage de 1 à 150 mm inclus - Classes de produit A et C.
a) les boulons à tête hexagonale US0 4014, ISO 4015 et
ISO 4016);
b) les vis à tête hexagonale (ISO 4017 et ISO 4018);
3 Dimensions
c) les écrous hexagonaux USO 4632, ISO 4633, ISO 4634,
ISO 4635 et ISO
...
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME~YHAPO~HAR OPTAHMSA~MR IlO CTAHAAPTbl3Al&lM.ORGANISATlON INTERNATIONALE DE NORMALISATION
Rondelles plates trempées et revenues pour vis
à serrage contrôlé pour constructions métalliques
Plain washers for high-strength structural bolting, hardened and tempered
Première édition - 1984-11-01
CDU 621.882.4 Réf. no : ISO 7415-1984 (F)
Gz
Descripteurs : élément de fixation, rondelle, rondelle plate, spécification, dimension, désignation, marquage.
.
LA
z
0
cn
- Prix basé sur 2 pages
---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
créé à cet effet. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants,
La Norme internationale ISO 7415 a été élaborée par le comité technique ISO/TC 2,
&men ts de fixation .
0 Organisation internationale de normalisation, 1984 0
Imprimé en Suisse
---------------------- Page: 2 ----------------------
60 7415-1984 (F)
NORME INTERNATIONALE
Rondelles plates trempées et revenues pour vis
à serrage contrôlé pour constructions métalliques
0 Introduction 2 Référence
La présente Norme internationale fait partie de la série complète
ISO 475913, Tolérances pour les éléments de tïxation -
des normes de produit ISO traitant des éléments de fixation à
Partie 3: Rondelles pour boulons, vis et écrous de diamètre de
entraînement hexagonal. Cette série comprend :
filetage de 1 à 150 mm inclus - Classes de produit A et C.
a) les boulons à tête hexagonale US0 4014, ISO 4015 et
ISO 4016);
b) les vis à tête hexagonale (ISO 4017 et ISO 4018);
3 Dimensions
c) les écrous hexagonaux USO 4632, ISO 4633, ISO 4634,
ISO 4635 et ISO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.