kSIST FprEN 13863-6:2022
(Main)Concrete pavements - Part 6: Test method for the determination of the splitting tensile strength of concrete on cylindrical discs
Concrete pavements - Part 6: Test method for the determination of the splitting tensile strength of concrete on cylindrical discs
This document specifies a method for the determination of the tensile strength on cylindrical discs of concrete using cylindrical discs as specimens, which can be
- separately manufactured or
- cut from cores of the finished concrete pavement.
Fahrbahnbefestigungen aus Beton - Teil 6: Prüfverfahren zur Bestimmung der Spaltzugfestigkeit von Beton auf Zylinderscheiben
Dieses Dokument legt ein Verfahren zur Bestimmung der Zugfestigkeit von Beton an Zylinderscheiben fest, wobei als Probekörper Zylinderscheiben verwendet werden, die entweder
- gesondert hergestellt oder
- aus Bohrkernen der fertigen Fahrbahnbefestigung aus Beton geschnitten werden können.
Chaussées en béton - Partie 6 : Méthodes d'essai pour la détermination de la divisant résistance à la traction de béton sur disques cylindriques
Le présent document spécifie une méthode de détermination de la résistance à la traction de béton sur disques cylindriques, les disques cylindriques servant d’éprouvettes pouvant être
- fabriqués séparément ou
- obtenus à partir de coupes de carottes prélevées dans la chaussée en béton finie.
Betonska vozišča - 6. del: Preskusna metoda za določanje natezne trdnosti betona na cilindričnih ploščah
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 13863-6:2022
01-marec-2022
Betonska vozišča - 6. del: Preskusna metoda za določanje natezne trdnosti betona
na cilindričnih ploščah
Concrete pavements - Part 6: Test method for the determination of the splitting tensile
strength of concrete on cylindrical discs
Fahrbahnbefestigungen aus Beton - Teil 6: Prüfverfahren zur Bestimmung der
Spaltzugfestigkeit von Beton auf Zylinderscheiben
Chaussées en béton - Partie 6 : Méthodes d'essai pour la détermination de la divisant
résistance à la traction de béton sur disques cylindriques
Ta slovenski standard je istoveten z: prEN 13863-6
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 13863-6:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13863-6:2022
---------------------- Page: 2 ----------------------
oSIST prEN 13863-6:2022
DRAFT
EUROPEAN STANDARD
prEN 13863-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2022
ICS 93.080.20
English Version
Concrete pavements - Part 6: Test method for the
determination of the splitting tensile strength of concrete
on cylindrical discs
Chaussées en béton - Partie 6 : Méthodes d'essai pour Fahrbahnbefestigungen aus Beton - Teil 6:
la détermination de la divisant résistance à la traction Prüfverfahren zur Bestimmung der Spaltzugfestigkeit
de béton sur disques cylindriques von Beton auf Zylinderscheiben
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13863-6:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13863-6:2022
prEN 13863-6:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
3.1 Terms and definitions . 4
3.2 Symbols . 5
4 Principle . 5
5 Apparatus . 6
5.1 Apparatus for production of the test specimens .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.