M/001 - Total gaseous Organic Carbon

2004-02 Mr. Cohr Expected in CMC for FV

This document specifies the requirements for dowels to be used in cast "in situ" concrete pavements for roads, airfields and other trafficked areas.

This European Standard specifies procedures for the sampling onto activated carbon, the preparation and the analysis of samples of volatile organic components such as those arising from solvent using processes. It can be used as a reference method.
NOTE   See Council Directive 1999/13/EEC.
The results obtained using this Standard are expressed as the mass concentration (mg/m3) of the individual gaseous organic components. This Standard is suitable for use in the range of about 0,5 mg/m3 to 2000 mg/m3.
For the measurement of the mass concentration of total organic carbon arising from solvent using processes then EN 13526 should be used.

This European Standard specifies procedures for the sampling onto activated carbon, the preparation and the analysis of samples of volatile organic components such as those arising from solvent using processes. It can be used as a reference method.
NOTE   See Council Directive 1999/13/EEC.
The results obtained using this Standard are expressed as the mass concentration (mg/m3) of the individual gaseous organic components. This Standard is suitable for use in the range of about 0,5 mg/m3 to 2000 mg/m3.
For the measurement of the mass concentration of total organic carbon arising from solvent using processes then EN 13526 should be used.

This European Standard specifies a set of minimum performance requirements for an instrument using flame ionisation detection, together with procedures for its calibration and operation, for the measurement of the mass concentration of total gaseous organic carbon (TOC) in flue gases.
This European Standard is suitable for the measurement of gaseous or vapour phase TOC emissions from Solvent Using Processes.
NOTE 1   See Council Directive 1999/13/EEC.
The results obtained using this standard are expressed in milligrams per cubic metre as total carbon (mg/m3). This standard is suitable for the measurement of concentrations from 20 mg/m3 to 500 mg/m3 but can be used at lower concentrations.
NOTE 2   By its nature a flame ionisation detector (FID) can also be used to measure higher concentrations.
The method specified in this European Standard can be used as a reference method or, with suitable minimum operational requirements, for continuous monitoring.  It can also be used for the calibration of automated measuring systems.  An indication of the uncertainty of the measurement is shown in annex A.

This European Standard specifies a set of minimum performance requirements for an instrument using flame ionisation detection, together with procedures for its calibration and operation, for the measurement of the mass concentration of total gaseous organic carbon (TOC) in stationary source combustion emissions. This European Standard is suitable for the measurements of low level gaseous or vapour phase TOC emissions such as those from municipal waste incinerators and hazardous Waste incinerators.

This European Standard specifies a set of minimum performance requirements for an instrument using flame ionisation detection, together with procedures for its calibration and operation, for the measurement of the mass concentration of total gaseous organic carbon (TOC) in flue gases.
This European Standard is suitable for the measurement of gaseous or vapour phase TOC emissions from Solvent Using Processes.
NOTE 1   See Council Directive 1999/13/EEC.
The results obtained using this standard are expressed in milligrams per cubic metre as total carbon (mg/m3). This standard is suitable for the measurement of concentrations from 20 mg/m3 to 500 mg/m3 but can be used at lower concentrations.
NOTE 2   By its nature a flame ionisation detector (FID) can also be used to measure higher concentrations.
The method specified in this European Standard can be used as a reference method or, with suitable minimum operational requirements, for continuous monitoring.  It can also be used for the calibration of automated measuring systems.  An indication of the uncertainty of the measurement is shown in annex A.

This European Standard specifies a set of minimum performance requirements for an instrument using flame ionisation detection, together with procedures for its calibration and operation, for the measurement of the mass concentration of total gaseous organic carbon (TOC) in stationary source combustion emissions. This European Standard is suitable for the measurements of low level gaseous or vapour phase TOC emissions such as those from municipal waste incinerators and hazardous Waste incinerators.