iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ENV 1996-3:2004

(Main)

Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods and simple rules for masonry structures

Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods and simple rules for masonry structures

This ENV 1996-3 provides either simplified calculation methods or simple rules to facilitate the design of the following unreinforced masonry walls, subject to certain conditions of application. Simplified calculation methods are given for: - walls subjected to vertical loading, including wind loading; - walls subjected to concentrated loads; - shear walls; - basement walls subjected to lateral earth pressure and vertical loads; - walls subjected to vertical loading where the height of the building does not exceed 3 storeys above ground level;...

Eurocode 6: Berechnung und Ausführung von Mauerwerk - Teil 3: Vereinfachte Berechnungsmethoden und einfache Regeln für Mauerwerk

Eurocode 6: Calcul des structures en maçonnerie - Partie 3: Méthodes de calcul simplifiées

Eurocode 6: Projektiranje zidanih konstrukcij - 3. del: Poenostavljene računske metode in enostavna pravila za zidane konstrukcije

General Information

Status
Withdrawn
Publication Date
31-Aug-2004
Withdrawal Date
30-Apr-2006
ICS
91.010.30 - Technical aspects
91.080.30 - Masonry
Technical Committee
KON - Structures
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-May-2006
Due Date
01-May-2006
Completion Date
01-May-2006
Mandate
M/BC/CEN/89/11 - Framework mandate to CEN on Eurocode work : execution of a standardization programme on Eurocodes for the structural design of building and civil engineering works
Ref Project
ENV 1996-3:1999 - Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods and simple rules for masonry structures

Relations

Replaced By
SIST EN 1996-3:2006 - Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
Effective Date
01-May-2006

Buy Standard

ENV 1996-3:2004ENV 1996-3:2004
PreviousNext
Standardization document
ENV 1996-3:2004
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 1996-3:2004
01-september-2004
(XURFRGH3URMHNWLUDQMH]LGDQLKNRQVWUXNFLMGHO3RHQRVWDYOMHQHUDþXQVNH
PHWRGHLQHQRVWDYQDSUDYLOD]D]LGDQHNRQVWUXNFLMH
Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods and
simple rules for masonry structures
Eurocode 6: Berechnung und Ausführung von Mauerwerk - Teil 3: Vereinfachte
Berechnungsmethoden und einfache Regeln für Mauerwerk
Eurocode 6: Calcul des structures en maçonnerie - Partie 3: Méthodes de calcul
simplifiées
Ta slovenski standard je istoveten z: ENV 1996-3:1999
ICS:
91.010.30 7HKQLþQLYLGLNL Technical aspects
91.080.30 Zidane konstrukcije Masonry
SIST ENV 1996-3:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 2 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 3 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 4 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 5 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 6 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 7 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 8 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 9 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 10 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 11 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 12 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 13 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 14 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 15 ----------------------

SIST ENV 1996-3:2004

---------------------- Page: 16 -----
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1996-1-1:2022(Main)
Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-1-1:2022

(1) The basis for the design of building and civil engineering works in masonry is given in this Part 1-1 of EN 1996, which deals with unreinforced masonry, reinforced masonry and confined masonry. Principles for the design of prestressed masonry are also given. This Part 1-1 of EN 1996 is not valid for masonry elements with a plan area of less than 0,04 m2.
(2) For those types of structures not covered entirely, for new structural uses for established materials, for new materials, or where actions and other influences outside normal experience have to be resisted, the provisions given in this Part 1-1 of EN 1996 may be applicable, but may need to be supplemented.
(3) Part 1-1 of EN 1996 gives detailed rules which are mainly applicable to ordinary buildings. The applicability of these rules may be limited, for practical reasons or due to simplifications; any limits of applicability are given in the text where necessary.
(4) Part 1-1 of EN 1996 does not cover:
—   resistance to fire (which is dealt with in EN 1996-1-2);
—   particular aspects of special types of building (for example, dynamic effects on tall buildings);
—   particular aspects of special types of civil engineering works (such as masonry bridges, dams, chimneys or liquid-retaining structures);
—   particular aspects of special types of structures (such as arches or domes);
—   masonry where gypsum, with or without cement, mortars are used;
—   masonry where the units are not laid in a regular pattern of courses (rubble masonry);
—   masonry reinforced with other materials than steel.

  • Standard
    137 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    135 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1996-1-1:2006+A1:2013/A101:2016
Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures - National Annex
  • National annex
    9 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1996-1-2:2005/AC:2011(Corrigendum)
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
EN 1996-1-2:2005/AC:2010

(1)P This Part 1-2 of EN 1996 deals with the design of masonry structures for the accidental situation of fire exposure, and is intended to be used in conjunction with EN 1996-1-1, EN 1996-2, 1996-3 and EN 1991-1-2. This part 1-2 only identifies differences from, or supplements to, normal temperature design.
(2)P This Part 1-2 deals only with passive methods of fire protection. Active methods are not
covered.
(3)P This Part 1-2 applies to masonry structures which, for reasons of general fire safety, are required to fulfil certain functions when exposed to fire, in terms of:
- avoiding premature collapse of the structure (load bearing function)
- limiting fire spread (flames, hot gases, excessive heat) beyond designated areas (separating function)
(4)P This Part 1-2 gives principles and application rules for designing structures for specified requirements in respect of the aforementioned functions and levels of performance.
(5)P This Part 1-2 applies to structures, or parts of structures, that are within the scope of EN 1996-1-1, EN 1996-2 and EN 1996-3 and are designed accordingly.
(6)P This Part 1-2 does not cover masonry built with Natural Stone units to EN771-6
(7)P This Part 1-2 deals with the following:
- non-loadbearing internal walls.
- non-loadbearing external walls.
- loadbearing internal walls with separating or non-separating functions.
- loadbearing external walls with separating or non-separating functions.

  • Corrigendum
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1996-2:2006/AC:2009(Corrigendum)
Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
EN 1996-2:2006/AC:2009

The scope of Eurocode 6 for Masonry Structures as given in 1.1.1 of EN 1996-1-1:2005 applies also to this EN 1996-2. EN 1996-2 gives basic rules for the selection of materials and execution of masonry to enable it to comply with the design assumptions of the other parts of Eurocode 6. With the exception of the items given in 1.1(3)P, the scope of Part 2 deals with ordinary aspects of masonry design and execution including:;the selection of masonry materials;;factors affecting the performance and durability of masonry;;resistance of buildings to moisture penetration;;storage, preparation and use of materials on site;;the execution of masonry;;masonry protection during execution; EN 1996-2 does not cover the following items:;those aspects of masonry covered in other parts of Eurocode 6;;aesthetic aspects;;applied finishes;;health and safety of persons engaged in the design or execution of masonry;;the environmental effects of masonry buildings, civil engineering works and structures on their surroundings.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1996-3:2006/AC:2009(Corrigendum)
Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
EN 1996-3:2006/AC:2009

The scope of Eurocode 6 for Masonry Structures as given in 1.1.1 of EN 1996-1-1:2005 applies also to this EN 1996-3. NOTE: Eurocode 6 deals only with the requirements for resistance, serviceability and durability of structures. Other requirements are not considered. Eurocode 6 does not cover the special requirements of seismic design. P EN 1996-3 provides simplified calculation methods to facilitate the design of the following unreinforced masonry walls, subject to certain conditions of application:;walls subjected to vertical loading and wind loading;;walls subjected to concentrated loads;;shear walls;;basement walls subjected to lateral earth pressure and vertical loads;;walls subjected to lateral loads but not subjected to vertical loads. P The rules given in EN 1996-3 are consistent with those given in EN 1996-1-1, but are more conservative in respect of the conditions and limitations of their use. For those types of masonry structure or parts of structures not covered by (1), the design shall be based on EN 1996-1-1. This EN 1996-3 applies only to those masonry structures, or parts thereof, that are described in EN 1996-1-1 and EN 1996-2. The simplified calculation methods given in this EN 1996-3 do not cover the design for accidental situations.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1996-2:2006(Main)
Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
EN 1996-2:2006

(1)P The scope of Eurocode 6 for Masonry Structures as given in 1.1.1 of EN 1996-1-1 applies also to this Part 2.
(2)P Part 2 of Eurocode 6 gives basic rules for the selection of materials and execution of masonry to enable it to comply with the design assumptions of the other parts of Eurocode 6. With the exception of the items given in 1.1(3)P, the scope of Part 2 deals with ordinary aspects of masonry design and execution including:
   the selection of masonry materials;
   factors affecting the performance and durability of masonry;
   resistance of buildings to moisture penetration;
   storage, preparation and use of materials on site;
   the execution of masonry;
   masonry protection during execution;
NOTE 1. Where general guidance only is given, additional guidance based on local conditions and practice may be made available in non contradictory complementary documents which may be referred to in the National Annex.
NOTE 2. The scope of Eurocode 6 excludes seismic, thermal and acoustic functional performance of masonry structures;
(3)P Part 2 of Eurocode 6 does not cover the following items:
   those aspects of masonry covered in other parts of Eurocode 6;
   aesthetic aspects;
   applied finishes;
   health & safety of persons engaged in the design or execution of masonry;
   the environmental effects of masonry buildings, civil engineering works and structures on their surroundings.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1996-1-1:2006(Main)
Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-1-1:2005

Eurocode 6 applies to the design of buildings and civil engineering works, or parts thereof, in unreinforced, reinforced, prestressed and confined masonry. Eurocode 6 deals only with the requirements for resistance, serviceability and durability of structures. Other requirements, for example, concerning thermal or sound insulation, are not considered. Execution is covered to the extent that is necessary to indicate the quality of the construction materials and products that should be used and the standard of workmanship on site needed to comply with the assumptions made in the design rules. Eurocode 6 does not cover the special requirements of seismic design. Provisions related to such requirements are given in Eurocode 8 "Design of structures in seismic regions" which complements, and is consistent with, Eurocode 6. Numerical values of the actions on buildings and civil engineering works to be taken into account in the design are not given in Eurocode 6. They are provided in Eurocode 1 "Actions on structures".

  • Standard
    123 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    105 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1996-3:2006(Main)
Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
EN 1996-3:2006

(1)P This Part 3 of Eurocode 6 provides simplified calculation methods to facilitate the design of the following unreinforced masonry walls, subject to certain conditions of application:
   walls subjected to vertical loading and wind loading;
   walls subjected to concentrated loads;
   shear walls;
   basement walls subjected to lateral earth pressure and vertical loads;
   walls subjected to lateral loads but not subjected to vertical loads.
(2)P The rules given in Part 3 are consistent with those given in Part 1-1, but are more conservative in respect of the conditions and limitations of their use.
(3) For those types of masonry structure or parts of structures not covered by (1), the design shall be based on Part 1-1.
(4) This Part 3 applies only to those masonry structures, or parts thereof, that are described in Part 1-1 and Part 2.
(5) The simplified calculation methods given in this Part 3 do not cover the design for accidental situations.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1996-1-2:2005(Main)
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
EN 1996-1-2:2005

(1)P This Part 1-2 of EN 1996 deals with the design of masonry structures for the accidental situation of fire exposure, and is intended to be used in conjunction with EN 1996-1-1, EN 1996-2, 1996-3 and EN 1991-1-2. This part 1-2 only identifies differences from, or supplements to, normal temperature design.
(2)P This Part 1-2 deals only with passive methods of fire protection. Active methods are not covered.
(3)P This Part 1-2 applies to masonry structures which, for reasons of general fire safety, are required to fulfil certain functions when exposed to fire, in terms of:
-   avoiding premature collapse of the structure (load bearing function)
-   limiting fire spread (flames, hot gases, excessive heat) beyond designated areas (separating function)
(4)P This Part 1-2 gives principles and application rules for designing structures for specified requirements in respect of the aforementioned functions and levels of performance.
(5)P This Part 1-2 applies to structures, or parts of structures, that are within the scope of EN 1996-1-1, EN 1996-2 and EN 1996-3 and are designed accordingly.
(6)P This Part 1-2 does not cover masonry built with Natural Stone units to EN771-6
(7)P This Part 1-2 deals with the following:
-   non-loadbearing internal walls.
-   non-loadbearing external walls.
-   loadbearing internal walls with separating or non-separating functions.
-   loadbearing external walls with separating or non-separating functions.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 1996-1-2:2022(Main)
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
prEN 1996-1-2

1.1   Scope of prEN 1996-1-2
(1) This document gives rules for the design of masonry structures for the accidental situation of fire exposure. This document only identifies differences from, or supplements to, normal temperature design.
(2) This document applies to structures, or parts of structures, that are within the scope of EN 1996-1-1 or EN 1996-3 and are designed accordingly.
(3) This document gives rules for the design of structures for specified requirements in respect of the aforementioned functions and the levels of performance.
(5) This document does not cover masonry built with natural stone units according to EN 771-6.
(6) This document deals with:
-   non-loadbearing internal walls;
-   non-loadbearing external walls;
-   loadbearing internal walls with separating or non-separating functions;
-   loadbearing external walls with separating or non-separating functions.
1.2   Assumptions
(1) The assumptions of EN 1990 and EN 1996-1-1 apply to this document.
(2) This document is intended to be used together with EN 1990, EN 1991-1-2, EN 1996-1-1, EN 1996 2 and EN 1996-3.
(3) In addition to the general assumptions of EN 1990 and EN 1996-1-1, the following assumptions apply:
-   the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation;
-   any fire protection measure taken into account in the design will be adequately maintained.

  • Draft
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day