SIST EN 1996-2:2006/AC:2009
(Corrigendum)Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
The scope of Eurocode 6 for Masonry Structures as given in 1.1.1 of EN 1996-1-1:2005 applies also to this EN 1996-2. EN 1996-2 gives basic rules for the selection of materials and execution of masonry to enable it to comply with the design assumptions of the other parts of Eurocode 6. With the exception of the items given in 1.1(3)P, the scope of Part 2 deals with ordinary aspects of masonry design and execution including:;the selection of masonry materials;;factors affecting the performance and durability of masonry;;resistance of buildings to moisture penetration;;storage, preparation and use of materials on site;;the execution of masonry;;masonry protection during execution; EN 1996-2 does not cover the following items:;those aspects of masonry covered in other parts of Eurocode 6;;aesthetic aspects;;applied finishes;;health and safety of persons engaged in the design or execution of masonry;;the environmental effects of masonry buildings, civil engineering works and structures on their surroundings.
Eurocode 6 - Bemessung und Konstruktion von Mauerwerksbauten - Teil 2: Planung, Auswahl der Baustoffe und Ausführung von Mauerwerk
Eurocode 6 - Calcul des ouvrages en maçonnerie - Partie 2: Conception, choix des matériaux et mise en oeuvre des maçonneries
Evrokod 6: Projektiranje zidanih konstrukcij - 2. del: Projektiranje z upoštevanjem izbire materialov in izvedbo zidovja
General Information
- Status
- Published
- Publication Date
- 12-Nov-2009
- Technical Committee
- KON - Structures
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 13-Oct-2009
- Due Date
- 18-Dec-2009
- Completion Date
- 13-Nov-2009
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 02-Oct-2024
- Effective Date
- 01-Dec-2009
Frequently Asked Questions
SIST EN 1996-2:2006/AC:2009 is a corrigendum published by the Slovenian Institute for Standardization (SIST). Its full title is "Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry". This standard covers: The scope of Eurocode 6 for Masonry Structures as given in 1.1.1 of EN 1996-1-1:2005 applies also to this EN 1996-2. EN 1996-2 gives basic rules for the selection of materials and execution of masonry to enable it to comply with the design assumptions of the other parts of Eurocode 6. With the exception of the items given in 1.1(3)P, the scope of Part 2 deals with ordinary aspects of masonry design and execution including:;the selection of masonry materials;;factors affecting the performance and durability of masonry;;resistance of buildings to moisture penetration;;storage, preparation and use of materials on site;;the execution of masonry;;masonry protection during execution; EN 1996-2 does not cover the following items:;those aspects of masonry covered in other parts of Eurocode 6;;aesthetic aspects;;applied finishes;;health and safety of persons engaged in the design or execution of masonry;;the environmental effects of masonry buildings, civil engineering works and structures on their surroundings.
The scope of Eurocode 6 for Masonry Structures as given in 1.1.1 of EN 1996-1-1:2005 applies also to this EN 1996-2. EN 1996-2 gives basic rules for the selection of materials and execution of masonry to enable it to comply with the design assumptions of the other parts of Eurocode 6. With the exception of the items given in 1.1(3)P, the scope of Part 2 deals with ordinary aspects of masonry design and execution including:;the selection of masonry materials;;factors affecting the performance and durability of masonry;;resistance of buildings to moisture penetration;;storage, preparation and use of materials on site;;the execution of masonry;;masonry protection during execution; EN 1996-2 does not cover the following items:;those aspects of masonry covered in other parts of Eurocode 6;;aesthetic aspects;;applied finishes;;health and safety of persons engaged in the design or execution of masonry;;the environmental effects of masonry buildings, civil engineering works and structures on their surroundings.
SIST EN 1996-2:2006/AC:2009 is classified under the following ICS (International Classification for Standards) categories: 91.010.30 - Technical aspects; 91.080.30 - Masonry. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1996-2:2006/AC:2009 has the following relationships with other standards: It is inter standard links to kSIST FprEN 1996-2:2024, SIST EN 1996-2:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 1996-2:2006/AC:2009 is associated with the following European legislation: EU Directives/Regulations: 2005-01-4408, 305/2011, 89/106/EEC; Standardization Mandates: M/265, M/BC/CEN/89/11. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 1996-2:2006/AC:2009 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Evrokod 6: Projektiranje zidanih konstrukcij - 2. del: Projektiranje z upoštevanjem izbire materialov in izvedbo zidovjaEurocode 6 - Bemessung und Konstruktion von Mauerwerksbauten - Teil 2: Planung, Auswahl der Baustoffe und Ausführung von MauerwerkEurocode 6 - Calcul des ouvrages en maçonnerie - Partie 2: Conception, choix des matériaux et mise en oeuvre des maçonneriesEurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry91.080.30Zidane konstrukcijeMasonry91.010.30Technical aspectsICS:Ta slovenski standard je istoveten z:EN 1996-2:2006/AC:2009SIST EN 1996-2:2006/AC:2009en,fr,de01-december-2009SIST EN 1996-2:2006/AC:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1996-2:2006/AC
September 2009
Septembre 2009
September 2009 ICS 91.010.30; 91.080.30 English version Version Française Deutsche Fassung
Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
Eurocode 6 - Calcul des ouvrages en maçonnerie - Partie 2: Conception, choix des matériaux et mise en oeuvre des maçonneries
Eurocode 6 - Bemessung und Konstruktion von Mauerwerksbauten - Teil 2: Planung, Auswahl der Baustoffe und Ausführung von Mauerwerk This corrigendum becomes
...
記事のタイトル：SIST EN 1996-2：2006/AC：2009 - ユーロコード6 - 石造構造物の設計 - 第2部：設計考慮事項、材料選択と石造りの施工 記事内容：EN 1996-1-1：2005の1.1.1で示された石造構造物のためのユーロコード6の範囲は、EN 1996-2にも適用されます。 EN 1996-2では、他のユーロコード6の設計仮定に準拠するために、石造りの材料選択と施工の基本的なルールを提供しています。 1.1（3）Pで指示された項目を除き、第2部の範囲は、石造りの設計と施工の一般的な側面に取り組んでいます。これには、石造りの材料の選択、性能と耐久性に影響を与える要素、建物の湿気侵入への抵抗力、材料の保管、準備、現場での使用、石造りの施工、施工中の石造りの保護などが含まれます。 EN 1996-2は以下の項目をカバーしていません：他のユーロコード6の他の部分でカバーされている石造に関する側面、美的な考慮事項、施工が関与する人々の健康と安全、石造構築物、土木工学的な作業、および周囲の環境への構造物の影響。
기사 제목: SIST EN 1996-2:2006/AC:2009 - 유로코드 6 - 석조 구조물 설계 - 제2부: 설계 고려사항, 재료 선택 및 석조물 시공 기사 내용: EN 1996-1-1:2005의 1.1.1에서 제시된 석조물을 위한 유로코드 6의 범위는 EN 1996-2에도 적용됩니다. EN 1996-2는 석조물이 다른 유로코드 6의 설계 가정에 부합하기 위해 재료 선택과 시공에 관한 기본 규칙을 제공합니다. 1.1(3)P에서 제시된 사항을 제외하고 제2부의 범위는 석조 설계와 시공의 보통 측면을 다룹니다. 이에는 석조 재료의 선택, 석조물의 성능과 내구성에 영향을 미치는 요소, 건물의 수분 침투에 대한 저항력, 현장에서의 재료 보관, 준비 및 사용, 석조물 시공, 시공 중의 석조 보호 등이 포함됩니다. EN 1996-2는 아래와 같은 내용을 다루지 않습니다: 다른 유로코드 6의 다른 부분에서 다루는 석조에 관련된 측면, 미적인 측면, 적용된 마무리, 석조 설계나 시공에 참여하는 사람들의 안전, 석조 건물, 토목 공학 작업 및 구조물이 주변 환경에 미치는 영향.
The article discusses the scope and content of the SIST EN 1996-2:2006/AC:2009, which is part of the Eurocode 6 for the design of masonry structures. The EN 1996-2 provides guidelines for the selection of materials and execution of masonry in order to meet the design assumptions outlined in other parts of the Eurocode 6. This includes aspects such as selecting materials, factors affecting performance and durability, moisture resistance, material storage and preparation, masonry execution, and protection during execution. However, it does not cover certain aspects such as those covered in other parts of Eurocode 6, aesthetic considerations, applied finishes, health and safety of personnel involved in the design or execution of masonry, and the environmental effects of masonry on its surroundings.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...