SIST EN 13494:2003
(Main)Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
This European Standard specifies equipment and procedures for determining the tensile bond strength of the adhesive and of the base coat to the thermal insulation material. It is applicable to External Thermal Insulation Composite Systems (ETICS).
Wärmedämmstoffe für das Bauwesen - Bestimmung der Haftzugfestigkeit zwischen Klebemasse/Klebemörtel und Wärmedämmstoff sowie zwischen Unterputz und Wärmedämmstoff
Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung der Haftzugfestigkeit zwischen Klebemasse/Klebemörtel (im Folgenden Klebschicht genannt) sowie zwischen Unterputz und Wärmedämmstoff fest.
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de l'adhérence par traction de la colle et de la couche de base sur le matériau d'isolation thermique
La présente Norme européenne prescrit l'équipement et les modes opératoires pour déterminer la résistance a la traction de la liaison de la colle et de la couche de base au matériau d'isolation thermique. Elle est applicable aux systemes composites d'isolation thermique par l'extérieur (ETICS).
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu – Ugotavljanje oprijema lepila in osnovnega nanosa na toplotnoizolacijski material
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu – Ugotavljanje oprijema lepila in osnovnega nanosa na toplotnoizolacijski materialWärmedämmstoffe für das Bauwesen - Bestimmung der Haftzugfestigkeit zwischen Klebemasse/Klebemörtel und Wärmedämmstoff sowie zwischen Unterputz und WärmedämmstoffProduits isolants thermiques destinés aux applications du bâtiment - Détermination de l'adhérence par traction de la colle et de la couche de base sur le matériau d'isolation thermiqueThermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13494:2002SIST EN 13494:2003en01-december-2003SIST EN 13494:2003SLOVENSKI
STANDARD
SIST EN 13494:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13494October 2002ICS 91.100.60English versionThermal insulation products for building applications -Determination of the tensile bond strength of the adhesive andof the base coat to the thermal insulation materialProduits isolants thermiques destinés aux applications dubâtiment - Détermination de l'adhérence par traction de lacolle et de la couche de base sur le matériau d'isolationthermiqueWärmedämmstoffe für das Bauwesen - Bestimmung derHaftzugfestigkeit zwischen Klebemasse/Klebemörtel undWärmedämmstoff sowie zwischen Unterputz undWärmedämmstoffThis European Standard was approved by CEN on 12 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13494:2002 ESIST EN 13494:2003
EN 13494:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions, symbols and units.43.1Terms and definitions.43.2Symbols and units.44Principle.55Apparatus.55.1Glue.55.2Rigid plates.55.3Saw.55.4Tensile testing machine.56Test specimens.56.1Preparation of the samples.56.2Conditioning of the samples.56.3Preparation and number of test specimens.57Procedure.67.1Test conditions.67.2Attachment of the test specimens to the tensile testing machine.67.3Test procedure.78Calculation and expression of results.78.1Tensile bond strength.78.2Mode of failure.89Accuracy of measurement.810Test report.8SIST EN 13494:2003
EN 13494:2002 (E)3ForewordThis document (EN 13494:2002) has been prepared by Technical Committee CEN /TC 88, "Thermal insulatingmaterials and products" the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest byApril 2003.This European Standard is one of a series of standards which specify test methods for determining dimensions andproperties of thermal insulating materials and products. It supports a series of product standards for thermalinsulating materials and products which derive from the Council Directive of 21 December 1988 on theapproximation of laws, regulations and administrative provisions of the Member States relating to constructionproducts (Directive 89/106/EEC) through the consideration of the essential requirements.This European Standard has been drafted for applications in buildings but may also be used in other areas where itis relevant.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13494:2003
EN 13494:2002 (E)41 ScopeThis European Standard specifies equipment and procedures for determining the tensile bond strength of theadhesive and of the base coat to the thermal insulation material.2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references subsequent amendments to, or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication refe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.