Fibre optic interconnecting devices and passive components - Performance standard - Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments

This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which a fibre optic middle-scale 1 x N (16 ≤ N ≤ 64) DWDM (Dense Wavelength Division Multiplexing) device with channel spacing of 50 GHz, 100 GHz and 200 GHz needs to satisfy in order to be categorized as meeting the requirements of category C-controlled environments. The requirements cover devices with single-mode non-connectorized pigtails and no circuit board. There is also a distinction between small-scale (N < 16) and large-scale (N > 64) 1 x N DWDM devices for the purpose of this standard.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 081-2: Nicht mit Steckverbinder versehene mittelgroße Einmoden-Lichtwellenleiter-1-x-N-DWDM-Bauteile für die Kategorie C - Kontrollierte Umgebung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 081-2: Dispositifs DWDM 1 x N de milieu d'échelle à fibres optiques unimodales, non connectorisés, pour catégorie C - Environnements contrôlés

L'IEC 61753-081-2:2014 contient les exigences et les sévérités initiales minimales d'essais et de mesures auxquelles un dispositif DWDM (multiplexage par répartition en longueur d'onde dense) 1 x N (16 ≤N ≤64) de milieu d'échelle à fibres optiques, avec un espacement entre canaux de 50 GHz, 100 GHz ou 200 GHz doit satisfaire pour entrer dans une catégorie satisfaisant aux exigences applicables à la catégorie C - Environnement contrôlé. Les exigences sont données pour les dispositifs DWDM à profil passe-bande gaussien et à profil passe-bande carré. Les exigences englobent les dispositifs à fibres amorces unimodales non connectorisés et sans carte de circuit. Cette deuxième édition annule et remplace la première édition parue en 2009. Cette édition constitue une révision technique. Cette présente édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- l'ajout de la fluctuation de la bande passante comme élément d'essai;
- la révision des détails à spécifier et les formats des Tableaux 2, 3 et 4;
- l'ajout de l'IEC 61300-3-38 comme référence normative.
Mots clés: dispositif DWDM (multiplexage par répartition en longueur d'onde dense) 1 x N (16 ≤N ≤64) de milieu d'échelle à fibres optiques, espacement entre canaux de 50 GHz, 100 GHz ou 200 GHz, catégorie C - Environnement contrôlé

Optični spojni elementi in pasivne komponente - Tehnični standard - 081-2. del: Električno krmiljeni spremenljivi optični atenuator srednje obsežne naprave 1 x N DWDM brez konektorjev za enorodovna vlakna kategorije C - Nadzorovana okolja (IEC 61753-081-2:2014)

Ta del standarda IEC 61753 vsebuje najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih mora optični atenuator srednje obsežne naprave 1 x N (16 ≤ N ≤ 64) DWDM (zgoščenovalovno dolžinsko multipleksiranje) z medkanalskim razmikom 50 GHz, 100 GHz in 200 GHz izpolnjevati, da izpolnjuje zahteve kategorije C – nadzorovano okolje. Zahteve zajemajo naprave z enorodnimi zaključnimi kabli brez konektorjev in brez plošče z vezji. Za namene tega standarda obstaja tudi razlika med manj obsežnimi napravami (N < 16) in bolj obsežnimi napravami (N > 64) 1 x N DWDM.

General Information

Status
Published
Publication Date
08-Sep-2014
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Sep-2014
Due Date
10-Nov-2014
Completion Date
09-Sep-2014

Relations

Buy Standard

Standard
EN 61753-081-2:2014
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fibre optic interconnecting devices and passive components - Performance standard - Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 61753-081-2:2014SIST EN 61753-081-2:2014en01-oktober-2014SIST EN 61753-081-2:2014SLOVENSKI
STANDARD



SIST EN 61753-081-2:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 61753-081-2
August 2014 ICS
English Version
Fibre optic interconnecting devices and passive components - Performance standard - Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments (IEC 61753-081-2:2014)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 081-2: Dispositifs DWDM 1 x N de milieu d'échelle à fibres optiques unimodales, non connectorisés, pour catégorie C - Environnements contrôlés (CEI 61753-081-2:2014)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 081-2: Nicht mit Steckverbinder versehene mittelgroße Einmoden-Lichtwellenleiter-1-x-N-DWDM-Bauteile für die Kategorie C - Kontrollierte Umgebung (IEC 61753-081-2:2014) This European Standard was approved by CENELEC on 2014-05-29. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61753-081-2:2014 ESIST EN 61753-081-2:2014



EN 61753-081-2:2014 - 2 - Foreword The text of document 86B/3646/CDV, future edition 2 of IEC 61753-081-2, prepared by SC 86B "Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-081-2:2014. The following dates are fixed: – latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-03-01 – latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-05-29
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-081-2:2014 was approved by CENELEC as a European Standard without any modification. SIST EN 61753-081-2:2014



- 3 - EN 61753-081-2:2014
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60793-2-50 2012
Optical fibres -- Part 2-50: Product specifications -Sectional specification for class B single-mode fibres EN 60793-2-50 2013
IEC 60794-2-50 -
Optical fibre cables -- Part 2-50: Indoor cables - Family specification for simplexand duplex cables for use in terminatedcable assemblies EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.