SIST EN 61754-16:2002

Fibre optic connector interfaces -- Part 16: Type PN connector family

Defines the standard interface dimensions for type PN family of connectors which is a duplex plug connector characterized by a 10,16 mm pitch, and a 2,5 mm nominal ferrule diameter.

Steckgesichter von Lichtwellenleiter-Steckverbindern -- Teil 16: Bauart PN Steckverbinderfamilie

Interfaces de connecteurs pour fibres optiques -- Partie 16: Famille de connecteurs de type PN

Définit les dimensions d'interfaces normalisées pour la famille des connecteurs de type PN qui est un connecteur à fiches doubles, caractérisé par un pas de 10,16 mm et un embout d'un diamètre nominal de 2,5 mm.

Fibre optic connector for interfaces - Part 16: Type PN connector family (IEC 61754-16:1999)

General Information

• Status: Published
• Publication Date: 31-Aug-2002
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2002
• Due Date: 01-Sep-2002
• Completion Date: 01-Sep-2002
• Ref Project: EN 61754-16:2000 - Fibre optic connector interfaces - Part 16: Type PN connector family

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61754-16:2002
01-september-2002
Fibre optic connector for interfaces - Part 16: Type PN connector family (IEC 61754
-16:1999)
Fibre optic connector interfaces -- Part 16: Type PN connector family
Steckgesichter von Lichtwellenleiter-Steckverbindern -- Teil 16: Bauart PN
Steckverbinderfamilie
Interfaces de connecteurs pour fibres optiques -- Partie 16: Famille de connecteurs de
type PN
Ta slovenski standard je istoveten z: EN 61754-16:2000
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61754-16:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61754-16:2002

---------------------- Page: 2 ----------------------

SIST EN 61754-16:2002

---------------------- Page: 3 ----------------------

SIST EN 61754-16:2002

---------------------- Page: 4 ----------------------

SIST EN 61754-16:2002
NORME CEI
INTERNATIONALE IEC
61754-16
INTERNATIONAL
Première édition
STANDARD
First edition
1999-10
Interfaces de connecteurs
pour fibres optiques –
Partie 16:
Famille de connecteurs de type PN
Fibre optic connector interfaces –
Part 16:
Type PN connector family
 IEC 1999 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photo-copie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
L
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

SIST EN 61754-16:2002
61754-16 © IEC:1999 – 3 –
CONTENTS
Page
FOREWORD . 5
Clause
1 Scope . 7
2 Description. 7
3 Interfaces. 7

---------------------- Page: 6 ----------------------

SIST EN 61754-16:2002
61754-16 © IEC:1999 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FIBRE OPTIC CONNECTOR INTERFACES –
Part 16: Type PN connector family
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61754-16 has been prepared by sub-committee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/1245/FDIS 86B/1279/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
The committee has decided that the contents of this publication will remain unchanged until 2005.
At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 7 ----------------------

SIST EN 61754-16:2002
61754-16 © IEC:1999 – 7 –
FIBRE OPTIC CONNECTOR INTERFACES –
Part 16: Type PN connector family
1 Scope
This part of IEC 61754 defines the standard interface dimensions for type PN family of
connectors.
2 Description
The parent connector for type PN connector family is a duplex plug connector which is
characterized by a 10,16 mm pitch, and a 2,5 mm nominal ferrule diameter. It includes two
types of plugs, PN-I and PN-II. PN
...