Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa (at ambient temperature) / 650 °C

This European Standard specifies the characteristics of self-locking serrated shank nuts in FE-PA2601, for
aerospace applications.
Classification: 1 100 MPa 1) / 650 °C 2).
NOTE FE-PA2601 is the new designation for FE-PA92HT, see TR 3900.

Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, verzahnt, aus hochwarmfestem Stahl FE-PA2601 (A286) - Klasse: 1 100 MPa (bei Raumtemperatur) / 650 °C

Série aérospatiale - Ecrous à sertir, dentelés, à freinage interne, en acier résistant à chaud FE-PA2601 (A286) - Classification : 1 100 MPa (à température ambiante) / 650 °C

La présente Norme Européenne spécifie les caractéristiques des écrous à sertir, dentelés, à freinage interne, en FE-PA2601, pour les applications aérospatiales.
Classification : 1 100 MPa  ) / 650 °C  ).
NOTE   FE-PA2601 est la nouvelle désignation pour FE-PA92HT, voir TR 3900.

Aeronavtika - Sidrne/utrdilne matice, samoblokirne, nazobčane, iz toplotnoodpornega jekla FE-PA2601 (A286) - Klasifikacija: 1100 MPa (pri okoljski temperaturi)/650 °C

Ta evropski standard določa lastnosti samoblokirnih nazobčanih sidrnih matic v FE-PA2601 za uporabo v aeronavtiki.
Razvrstitev: 1 100 MPa 1) / 650 °C 2).
OPOMBA: FE-PA2601 je nova oznaka za FE-PA92HT, glejte TR 3900.

General Information

Status
Published
Publication Date
09-Jul-2015
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
08-Jul-2015
Due Date
12-Sep-2015
Completion Date
10-Jul-2015

Relations

Buy Standard

Standard
EN 3014:2015
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3014:2015
01-september-2015
1DGRPHãþD
SIST EN 3014:2002
$HURQDYWLND6LGUQHXWUGLOQHPDWLFHVDPREORNLUQHQD]REþDQHL]
WRSORWQRRGSRUQHJDMHNOD)(3$ $ .ODVLILNDFLMD03D SULRNROMVNL
WHPSHUDWXUL ƒ&
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601
(A286) - Classification: 1 100 MPa (at ambient temperature) / 650 °C
Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, verzahnt, aus hochwarmfestem
Stahl FE-PA2601 (A286) - Klasse: 1 100 MPa (bei Raumtemperatur) / 650 °C
Série aérospatiale - Ecrous à sertir, dentelés, à freinage interne, en acier résistant à
chaud FE-PA2601 (A286) - Classification : 1 100 MPa (à température ambiante) / 650 °C
Ta slovenski standard je istoveten z: EN 3014:2015
ICS:
49.030.30 Matice Nuts
SIST EN 3014:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3014:2015

---------------------- Page: 2 ----------------------

SIST EN 3014:2015

EUROPEAN STANDARD
EN 3014

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2015
ICS 49.030.30 Supersedes EN 3014:2001
English Version
Aerospace series - Shank nuts, self-locking, serrated, in heat
resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa (at
ambient temperature) / 650 °C
Série aérospatiale - Ecrous à sertir, dentelés, à freinage Luft- und Raumfahrt - Einnietmuttern, selbstsichernd,
interne, en acier résistant à chaud FE-PA2601 (A286) - verzahnt, aus hochwarmfestem Stahl FE-PA2601 (A286) -
Classification : 1 100 MPa (à température ambiante) / 650 Klasse: 1 100 MPa (bei Raumtemperatur) / 650 °C
°C
This European Standard was approved by CEN on 5 December 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3014:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3014:2015
EN 3014:2015 (E)
Contents
Page
European foreword .3
1 Scope .4
2 Normative references .4
3 Required characteristics .5
3.1 Configuration – Dimensions – Tolerances — Masses .5
3.2 Materials .5
4 Designation .6
5 Marking .6
6 Technical specification .6
7 Installation .6
Annex A (informative) Standard evolution form .7

2

---------------------- Page: 4 ----------------------

SIST EN 3014:2015
EN 3014:2015 (E)
European foreword
This document (EN 3014:2015) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2015, and conflicting national standards shall be withdrawn
at the latest by December 2015.
This document supersedes EN 3014:2001.
Attentio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.