iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61003-1:1998

(Main)

Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs -- Part 1: Methods of evaluating the performance

Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs -- Part 1: Methods of evaluating the performance

Applies to pneumatic and electric industrial-process instruments using measured values that are continuous signals. Specifies uniform methods of tests for the evaluation of the performance.

Systeme der industriellen Prozeßtechnik - Geräte mit analogen Eingängen und Zwei- oder Mehrpunktverhalten -- Teil 1: Methoden der Beurteilung des Betriebsverhaltens

Processus industriels - Instruments avec entrées analogiques et sorties à deux ou plusieurs états -- Partie 1: Méthodes d'évaluation des performances

S'applique aux instruments pneumatiques et électriques pour processus industriels, instruments utilisant des valeurs mesurées qui sont des signaux continus. Spécifie des méthodes d'essais uniformes pour l'évaluation des performances.

Industrial-process control systems -Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating the performance (IEC 61003-1:1991)

General Information

Status
Withdrawn
Publication Date
31-Oct-1998
Withdrawal Date
17-May-2009
ICS
25.040.40 - Industrial process measurement and control
35.240.50 - IT applications in industry
Technical Committee
MKP - Industrial-process measurement and control
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Apr-2009
Due Date
14-May-2009
Completion Date
18-May-2009
Ref Project
EN 61003-1:1993 - Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating the performance

Relations

Revised
SIST EN 61003-1:2004 - Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs -- Part 1: Methods of evaluating performance
Effective Date
13-May-2010
Replaced By
SIST EN 61003-1:2004 - Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs -- Part 1: Methods of evaluating performance
Effective Date
29-Jan-2023

Buy Standard

EN 61003-1:1998EN 61003-1:1998
PreviousNext
Standard
EN 61003-1:1998
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SIST EN 61003-1:1998

---------------------- Page: 1 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 2 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 3 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 4 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 5 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 6 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 7 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 8 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 9 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 10 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 11 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 12 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 13 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 14 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 15 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 16 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 17 ----------------------

SIST EN 61003-1:1998

---------------------- Page: 18 ----------------------

SIS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 61987-1:2007(Main)
Industrial-process measurement and control - Data structures and elements in process equipment catalogues -- Part 1: Measuring equipment with analogue and digital output
EN 61987-1:2007

This part of IEC 61987 defines a generic structure in which product features of industrialprocess measurement and control equipment with analogue or digital output should be arranged, in order to facilitate the understanding of product descriptions when they are transferred from one party to another. It applies to the production of catalogues of process measuring equipment supplied by the manufacturer of the product and helps the user to formulate his requirements. This standard also serves as a reference document for all future standards which are concerned with process measuring equipment catalogues. In addition, it is intended as a guide for the production of further standards on process equipment documentation for similar systems, for example, for other measuring equipment and actuators.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61804-2:2004(Main)
Function Blocks (FB) for process control -- Part 2: Specification of FB concept and Electronic Device Description Language (EDDL)
EN 61804-2:2004

is applicable to Function Blocks (FB) for process control and specifies the Electronic Device Description Language (EDDL), specifies FB by using the result of harmonization work as regards several elements. defines a subset of the requirements of EN 61804-1 (hereafter referred to as Part 1) only, while Part 1 describes requirements for a distributed system.

  • Standard
    361 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61512-2:2004(Main)
Batch control -- Part 2: Data structures and guidelines for languages
EN 61512-2:2002

This part of this standard on batch control defines data models that describe batch control as applied in the process industries, data structures for facilitating communications within and between batch control implementations and language guidelines for representing recipes. Refer to Annex A for an explanation of the UML notation that is used in this part of this standard. Refer to Annex B for a summary of all of the SQL definitions from clause 5.

  • Standard
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61131-2:2004(Main)
Programmable controllers -- Part 2: Equipment requirements and tests
EN 61131-2:2003

Specifies electrical, mechanical and functional requirements as well as the test methods and procedures to be used for the verification of compliance with these.

  • Standard
    117 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61131-1:2004(Main)
Programmable controllers -- Part 1: General information
EN 61131-1:2003

constitutes Part 1 of a series of standards on programmable controllers and their associated peripherals and should be read in conjunction with the other parts of the series.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61131-5:2002(Main)
Programmable controllers -- Part 5: Communications
EN 61131-5:2001

Specifies communication aspects of a programmable controller.

  • Standard
    102 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61131-7:2002(Main)
Programmable controllers -- Part 7: Fuzzy control programming
EN 61131-7:2000

Defines a language for the programming of Fuzzy Control applications used by programmable controllers.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61512-1:2001(Main)
Batch control -- Part 1: Models and terminology
EN 61512-1:1999

Defines reference models for batch control as used in the process industries and terminology that helps explain the relationships between these models and terms. May not apply to all batch control applications.

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61987-31:2023(Main)
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 31: List of Properties (LOPs) of infrastructure devices for electronic data exchange - Generic structures (IEC 61987-31:2022)
EN IEC 61987-31:2023

This part of IEC 61987 provides
• a characterization for the integration of infrastructure devices in the Common Data
Dictionary (CDD);
• generic structures in conformance with IEC 61987-10 for Operating Lists of Properties
(OLOPs) and Device Lists of Properties (DLOPs) of infrastructure devices.
The generic structures for the OLOP and DLOP contain the most important blocks for
infrastructure devices. Blocks pertaining to a specific equipment type will be described in the
corresponding part of the IEC 61987 series. Similarly, equipment properties are not part of this
part of IEC 61987. For instance, the OLOP and DLOP for I/O-modules are to be found in
IEC 61987-32.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61918:2019/A12:2023(Amendment)
Industrial communication networks - Installation of communication networks in industrial premises
EN IEC 61918:2018/A12:2023

This document specifies basic requirements for the installation of media for communication networks within and between the automation islands, of industrial sites. This standard covers balanced and optical fibre cabling. It also covers the cabling infrastructure for wireless media, but not the wireless media itself. Additional media are covered in the IEC 61784-5 series.
This document is a companion standard to the communication networks of the industrial automation islands and especially to the communication networks specified in the IEC 61158 series and the IEC 61784 series.
In addition, this document covers the connection between the generic telecommunications cabling specified in ISO/IEC 11801-3 and the specific communication cabling of an automation island, where an automation outlet (AO) replaces the telecommunication outlet (TO) of ISO/IEC 11801-3.
NOTE If the interface used at the AO does not conform to that specified for the TO of ISO/IEC 11801-3, the cabling no longer conforms to ISO/IEC 11801-3 although certain features, including performance, of generic cabling may be retained.
This document provides guidelines that cope with the critical aspects of the industrial automation area (safety, security and environmental aspects such as mechanical, liquid, particulate, climatic, chemicals and electromagnetic interference).
This document does not recognise implementations of power distribution with or through Ethernet balanced cabling systems that are not specified in IEEE 802.3af and in IEEE 802.3at.
This document deals with the roles of planner, installer, verifier, and acceptance test personnel, administration and maintenance personnel and specifies the relevant responsibilities and/or gives guidance.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day