SIST EN 301 908-4 V3.2.1:2008
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 4: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 4: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
In addition to Release 2, the third Release of the EN will cover also operation in the 900 MHz band, the 1800 MHz band and the 2600 MHz band. It will cover as well small modifications and enhancements according to the source specifications
Mobile stations for IMT-2000 CDMA multi-carrier (cdma2000) may support:
1) operation in cdma2000 Spread Spectrum Systems as defined in TIA-2000.2 [5], referred to herein as operation in type 1 cdma2000 systems; or
2) operation in cdma2000 High Rate Packet Data Systems as defined in TIA-856 [11], referred to herein as operation in type 2 cdma2000 systems; or
3) operation in both, type 1 and type 2 cdma2000 systems.
The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Bazne postaje (BS), ponavljalniki (repetitorji) in uporabniška oprema (UE) za celična omrežja tretje generacije IMT-2000 - 4. del: Harmonizirani EN za IMT-2000, CDMA “Multi-Carrier” (CDMA2000) (UE), ki zajema bistvene zahteve člena 3.2 direktive R&TTE
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 301 908-4 V3.2.1:2008
01-marec-2008
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50 %D]QH
SRVWDMH %6 SRQDYOMDOQLNL UHSHWLWRUML LQXSRUDEQLãNDRSUHPD 8( ]DFHOLþQD
RPUHåMDWUHWMHJHQHUDFLMH,07GHO +DUPRQL]LUDQL(1]D,07&'0$
³0XOWL&DUULHU´ &'0$ 8( NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH
5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS),
Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks -
Part 4: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering
essential requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 908-4 Version 3.2.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 908-4 V3.2.1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 908-4 V3.2.1:2008
---------------------- Page: 2 ----------------------
SIST EN 301 908-4 V3.2.1:2008
ETSI EN 301 908-4 V3.2.1 (2007-09)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for
IMT-2000 Third-Generation cellular networks;
Part 4: Harmonized EN for IMT-2000,
CDMA Multi-Carrier (cdma2000) (UE)
covering essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 3 ----------------------
SIST EN 301 908-4 V3.2.1:2008
2 ETSI EN 301 908-4 V3.2.1 (2007-09)
Reference
REN/ERM-TFES-003-4
Keywords
3G, 3GPP2, cdma2000, cellular, digital,
IMT-2000, mobile, radio, regulation, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2007.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 908-4 V3.2.1:2008
3 ETSI EN 301 908-4 V3.2.1 (2007-09)
Contents
Intellectual Property Rights.6
Foreword.6
Introduction .7
1 Scope.8
2 References.9
3 Definitions, symbols and abbreviations .10
3.1 Definitions.10
3.2 Symbols.18
3.3 Abbreviations.21
4 Technical requirements specifications .22
4.1 Environmental profile.22
4.2 Conformance requirements.23
4.2.1 Introduction.23
4.2.2 Conducted spurious emissions when transmitting .23
4.2.2.1 Definition.23
4.2.2.2 Limits.23
4.2.2.2.1 Mobile stations operating in type 1 cdma2000 systems using spreading rate 1 or operating in
type 2 cdma2000 systems.24
4.2.2.2.2 Mobile stations operating in type 1 cdma2000 systems using spreading rate 3 .25
4.2.2.3 Conformance.25
4.2.3 Maximum RF output power.25
4.2.3.1 Definition.25
4.2.3.2 Limits.26
4.2.3.3 Conformance.26
4.2.4 Minimum controlled output power .26
4.2.4.1 Definition.26
4.2.4.2 Limits.26
4.2.4.3 Conformance.26
4.2.5 Conducted spurious emissions when not transmitting .27
4.2.5.1 Definition.27
4.2.5.2 Limits.27
4.2.5.3 Conformance.27
4.2.6 Receiver blocking characteristics .27
4.2.6.1 Definition.27
4.2.6.2 Limits.27
4.2.6.2.1 Mobile station operating in type 1 cdma2000 systems.27
4.2.6.2.2 Mobile station operating in type 2 cdma2000 systems.27
4.2.6.3 Conformance.28
4.2.7 Intermodulation spurious response attenuation.28
4.2.7.1 Definition.28
4.2.7.2 Limits.28
4.2.7.2.1 Mobile station operating in type 1 cdma2000 systems.28
4.2.7.2.2 Mobile stations operating in type 2 cdma2000 systems .28
4.2.7.3 Conformance.28
4.2.8 Adjacent channel selectivity .28
4.2.8.1 Definition.28
4.2.8.2 Limits.28
4.2.8.2.1 Mobile station operating in type 1 cdma2000 systems.28
4.2.8.2.2 Mobile station operating in type 2 cdma2000 systems.28
4.2.8.3 Conformance.28
4.2.9 Supervision of paging channel or Forward Common Control Channel.29
4.2.9.1 Definition.29
4.2.9.2 Limits.29
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 908-4 V3.2.1:2008
4 ETSI EN 301 908-4 V3.2.1 (2007-09)
4.2.9.3 Conformance.29
4.2.10 Supervision of forward traffic channel .29
4.2.10.1 Definition.29
4.2.10.2 Limits.29
4.2.10.3 Conformance.30
4.2.11 Supervision of control channel .30
4.2.11.1 Definition.30
4.2.11.2 Limits.30
4.2.11.3 Conformance.30
4.2.12 Supervision procedures in variable rate state.31
4.2.12.1 Definition.31
4.2.12.2 Limits.31
4.2.12.3 Conformance.31
5 Testing for compliance with technical requirements.31
5.1 Conditions for testing .31
5.1.1 Introduction.31
5.1.2 Standard equipment under test.32
5.1.2.1 Basic equipment.32
5.1.2.2 Ancillary equipment.32
5.2 Interpretation of the measurement results .32
5.3 Essential radio test suites.32
5.3.1 Conducted spurious emissions when transmitting .32
5.3.1.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems .32
5.3.1.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems .34
5.3.2 Maximum RF output power.35
5.3.2.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems .35
5.3.2.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems .37
5.3.3 Minimum controlled output power .38
5.3.3.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems .38
5.3.3.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems .39
5.3.4 Conducted spurious emissions when not transmitting .39
5.3.4.1 Test procedure for mobile stations supporting operation in type 1 and/or type 2 cdma2000
systems.39
5.3.5 Receiver blocking characteristics .39
5.3.5.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems .39
5.3.5.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems .41
5.3.6 Intermodulation spurious response attenuation.42
5.3.6.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems .42
5.3.6.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems .43
5.3.7 Adjacent channel selectivity .44
5.3.7.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems .44
5.3.7.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems .45
5.3.8 Supervision of paging channel or Forward Common Control Channel.46
5.3.9 Supervision of forward traffic channel .47
5.3.10 Supervision of control channel .48
5.3.11 Supervision procedures in variable rate state.49
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).50
Annex B (informative): Environmental profile and standard test conditions .52
B.1 Introduction.52
B.2 CDMA environmental requirements.52
B.2.1 Temperature and power supply voltage.52
B.2.1.1 Definition.52
B.2.1.2 Method of measurement.52
B.2.1.3 Minimum standard.53
B.2.2 High humidity.53
B.2.2.1 Definition.53
B.2.2.2 Method of measurement.53
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 908-4 V3.2.1:2008
5 ETSI EN 301 908-4 V3.2.1 (2007-09)
B.2.2.3 Minimum standard.53
B.2.3 Vibration stability.54
B.2.3.1 Definition.54
B.2.3.2 Method of measurement.54
B.2.3.3 Minimum standard.54
B.2.4 Shock stability .54
B.2.4.1 Definition.54
B.2.4.2 Method of measurement.54
B.2.4.3 Minimum standard.54
B.3 Standard test conditions.54
B.3.1 Standard environmental test conditions.54
B.3.2 Standard conditions for the primary power supply.55
B.3.2.1 General.55
B.3.2.2 Standard DC test voltage from accumulator batteries.55
B.3.2.3 Standard AC voltage and frequency .55
Annex C (informative): The EN title in the official languages .56
Annex D (informative): Bibliography.58
History .59
ETSI
---------------------- Page: 7 ----------------------
SIST EN 301 908-4 V3.2.1:2008
6 ETSI EN 301 908-4 V3.2.1 (2007-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
The present document is part 4 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User
Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below:
Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 10: "Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of
the R&TTE Directive";
Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive".
ETSI
---------------------- Page: 8 ----------------------
SIST EN 301 908-4 V3.2.1:2008
7 ETSI EN 301 908-4 V3.2.1 (2007-09)
Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 24 August 2007
Date of latest announcement of this EN (doa): 30 November 2007
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 May 2008
Date of withdrawal of any conflicting National Standard (dow): 31 May 2009
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 (see bibliography).
ETSI
---------------------- Page: 9 ----------------------
SIST EN 301 908-4 V3.2.1:2008
8 ETSI EN 301 908-4 V3.2.1 (2007-09)
1 Scope
The present document applies to the following radio equipment type:
• Mobile stations for IMT-2000 CDMA multi-carrier (cdma2000).
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1.
Table 1: CDMA multi-carrier mobile stations service frequency bands
Direction of transmission CDMA multi-carrier mobile stations Band Class (BC)
service frequency bands
Transmit 1 920 MHz to 1 980 MHz
6
Receive 2 110 MHz to 2 170 MHz
Transmit 1 710 MHz to 1 785 MHz
8
Receive 1 805 MHz to 1 880 MHz
Transmit 880 MHz to 915 MHz
9
Receive 925 MHz to 960 MHz
Transmit 2 500 MHz to 2 570 MHz
13
Receive 2 620 MHz to 2 690 MHz
Mobile stations for IMT-2000 CDMA multi-carrier (cdma2000) may support:
1) operation in cdma2000 Spread Spectrum Systems as defined in TIA-2000.2 [5], referred to herein as operation
in type 1 cdma2000 systems; or
2) operation in cdma2000 High Rate Packet Data Systems as defined in TIA-856 [11], referred to herein as
operation in type 2 cdma2000 systems; or
3) operation in both, type 1 and type 2 cdma2000 systems.
The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2,
which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http:/
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.