SIST EN 13721:2004
(Main)Furniture - Assessment of the surface reflectance
Furniture - Assessment of the surface reflectance
This document specifies a method for the assessment of the surface reflectance of furniture surfaces and relates to rigid surfaces of all finished products regardless of materials, except for finishes on leather and fabrics, which are excluded from this document.
The test is intended to be carried out on finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
The test method does not apply to extreme reflectances, i.e. below 15 % and above 75 %, because in the extreme reflectance range the results of the different measurement methods could deviate.
It is not applicable to some metallic paints and pearly coatings.
Möbel - Bewertung des Oberflächenreflexionsgrades
Dieses Dokument legt ein Prüfverfahren für die Bewertung des Oberflächenreflexionsgrades von ebenen Möbeloberflächen unabhängig vom Werkstoff fest, ausgenommen Oberflächen aus Leder und Textilien.
Die Prüfung wird im Allgemeinen am gebrauchsfertigen Möbel durchgeführt, kann aber auch an Prüfkörpern durchgeführt werden, die aus dem gleichen Werkstoff mit identischer Oberflächenbehandlung wie das Möbel bestehen und groß genug sind, die Prüfungen entsprechend durchführen zu können.
Das vorliegende Verfahren gilt nicht für extreme Reflexionsgrade, d. h. Helligkeit unter 15 % und über 75 %, da in diesem Reflexionsbereich die Ergebnisse zwischen den verschiedenen Messwerten voneinander abweichen können.
Dieses Prüfverfahren ist bei einigen Metallic- und Perlmuttlackierungen nicht anwendbar.
Meubles - Évaluation de la luminance lumineuse des surfaces
La présente norme européenne spécifie une méthode permettant d'évaluer la luminance lumineuse des surfaces des meubles et s'applique aux surfaces rigides de tous les produits finis, sans distinction de matériaux, a l'exception des finitions appliquées sur le cuir et les textiles, qui sont exclus de la présente norme européenne.
Cet essai est destiné a etre réalisé sur des meubles finis, mais il peut etre mené sur des panneaux d'essai dont le matériau et la finition sont identiques a ceux du produit fini et d'une taille suffisante pour satisfaire aux exigences de l'essai.
La méthode d'essai ne s'applique pas aux luminances lumineuses extremes, c'est-a-dire inférieures a 15 % et supérieures a 75 %, parce que, dans ces zones, les résultats des différentes méthodes de mesure peuvent dévier.
Elle ne s'applique pas a certaines peintures métallisées et certains revetements nacrés.
Pohištvo - Ugotavljanje odbojnosti površine
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pohištvo - Ugotavljanje odbojnosti površineMöbel - Bewertung des OberflächenreflexionsgradesMeubles - Évaluation de la luminance lumineuse des surfacesFurniture - Assessment of the surface reflectance97.140PohištvoFurnitureICS:Ta slovenski standard je istoveten z:EN 13721:2004SIST EN 13721:2004en,fr,de01-december-2004SIST EN 13721:2004SLOVENSKI
STANDARD
SIST EN 13721:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13721July 2004ICS 97.140English versionFurniture - Assessment of the surface reflectanceMeubles - Evaluation de la luminance lumineuse dessurfacesMöbel - Bewertung des OberflächenreflexionsgradesThis European Standard was approved by CEN on 13 May 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13721:2004: ESIST EN 13721:2004
EN 13721:2004 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.5 5 Viewing/illumination condition geometry.5 6 Standard colorimetric observer and standard illuminant.6 7 Equipment.6 8 Preparation and conditioning of test units/test panels.7 9 Instrument calibration.7 9.1 Calibration.7 9.2 Reference scale.7 9.3 Reference standards (primary and working).7 10 Test Procedure.7 11 Test report.8 Bibliography.9
SIST EN 13721:2004
EN 13721:2004 (E) 3 Foreword This document (EN 13721:2004) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2005, and conflicting national standards shall be withdrawn at the latest by January 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 13721:2004
EN 13721:2004 (E) 4 1 Scope This document specifies a method for the assessment of the surface reflectance of furniture surfaces and relates to rigid surfaces of all finished products regardless of materials, except for finishes on leather and fabrics, which are excluded from this document. The test is intended to be carried out on finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test. The test method does not apply to extreme reflectances, i.e. below 15 % and above 75 %, because in the extreme reflectance range the results of the different measurement methods could deviate. It is not applicable to some metallic paints and pearly coatings. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 7724-1:1984, Paints and varnishes - Colorimetry Part 1: Principles ISO 7724-2, Paints and varnishes – Colorimetry - Part 2: Colour measurement CIE 1931, Standard colorimetric colour coordinates CIE 1964, Colorimetry, CIE Standard Recommendations 3 Terms and definitions For the purposes of this document the following terms and definitions apply.
3.1 reflectance ratio of the radiant flux reflected in the directions within a given cone to that reflected in the same directions by a perfect reflecting diffuser identically irradiated in the observed wavelength interval (called spectral reflec
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.