SIST EN ISO 10564:2001

Soldering and brazing materials - Methods for the sampling of soft solders for analysis (ISO 10564:1993)

Describes the procedures designed to produce an analysis sample representative for each batch of soft solder in the consignment in the folowing details: unit of product, selection of the batch sample, preparation of the test sample sticks from the batch sample, preparation of the analysis sample, testing of individual units of product, preservation of the analysis sample.

Zusätze zum Weich- und Hartlöten - Methoden zur Probenahme von Weichlöten für die Analyse (ISO 10564:1993)

Diese Internationale Norm legt Methoden zur Probenahme einer Liefermenge von Weichloten, bestehend aus Losen, und ein Verfahren für die Vorbereitung der Analysenprobe, die repräsentativ für jedes Los ist, fest.

Produits d'apport pour brasage tendre et brasage fort - Méthode d'échantillonnage des produits d'apport de brasage tendre pour analyse (ISO 10564:1993)

La présente Norme internationale prescrit des méthodes d'échantillonnage d'une livraison de produits d'apport de brasage tendre subdivisée en lots et indique comment préparer un échantillon pour analyse représentatif de chaque lot.

Spajke za mehko in trdo spajkanje - Metode vzorčenja mehkih spajk za analizo (ISO 10564:1993)

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-2001
• Withdrawal Date: 29-Sep-2020
• ICS: 25.160.50 - Brazing and soldering
• Technical Committee: VAR - Welding
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 09-Sep-2020
• Due Date: 02-Oct-2020
• Completion Date: 30-Sep-2020
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN ISO 10564:1997 - Soldering and brazing materials - Methods for the sampling of soft solders for analysis (ISO 10564:1993)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10564:2001
01-februar-2001
6SDMNH]DPHKNRLQWUGRVSDMNDQMH0HWRGHY]RUþHQMDPHKNLKVSDMN]DDQDOL]R
,62
Soldering and brazing materials - Methods for the sampling of soft solders for analysis
(ISO 10564:1993)
Zusätze zum Weich- und Hartlöten - Methoden zur Probenahme von Weichlöten für die
Analyse (ISO 10564:1993)
Produits d'apport pour brasage tendre et brasage fort - Méthode d'échantillonnage des
produits d'apport de brasage tendre pour analyse (ISO 10564:1993)
Ta slovenski standard je istoveten z: EN ISO 10564:1997
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
SIST EN ISO 10564:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10564:2001

---------------------- Page: 2 ----------------------

SIST EN ISO 10564:2001

---------------------- Page: 3 ----------------------

SIST EN ISO 10564:2001

---------------------- Page: 4 ----------------------

SIST EN ISO 10564:2001
INTERNATIONAL
ISO
STANDARD
10564
First edition
1993-07-15
Soldering and brazing materials <
Methods for the sampling of soft solders
for analysis \,
Produits d ’apport pour brasage tendre et brasage fort - Methode
d%chantillonnage des produits d ’apport de brasage tendre pour analyse
Reference number
ISO 10564:1993(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 10564:2001
ISO 10564:1993(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(1 EC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 10564 was prepared by Technical Committee
lSO/K 44, Welding and allied processes, Sub-Committee SC 12,
Soldering and brazing ma terials.
0 ISO 1993
All rights reserved. No patt of this publication may be reproduced or utilized in any form or
by any means, electronie or mechanical, including photocopying and microfilm, without per-
mission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 6 ----------------------

SIST EN ISO 10564:2001
ISO 10564:1993(E)
INTERNATIONAL STANDARD
Methods for the’
Soldering and brazing materials -
sampling. of soft solders for analysis
3 Principle
1 Scope
The procedures given in clause 4 are designed to
This International Standard specifies methods for
produce an analysis Sample representative of each
sampling a consignment of soft solder which is sub-
batch of soft solder in the consignment.
divided into batches and the procedures for the prep-
aration of an analysis Sample representative of each
batch.
4 Sampling
2 Definitions
4.1 Unit of product
For the purposes of this International Standard, the
The unit of product used for the sampling shall be as
following definitions apply.
given in table 1.
2.1 soft solder: Metallic filler material which is used
to join metallic Parts and which has a melting tem- Table 1 - Units of product for various forms of
perature (liquidus) lower than that of the Parts to be solder
joined, and usually lower than 450 “C.
Form of solder Unit of product
2.2 unit of product: Item .inspected in Order to de-
Ingot, bar, slab, stick or rod A Single ingot, bar, slab,
termine its classification as defective or non-
stick or rod
defective.
Wire A Single coil or reel
Wrought pre-forms and The individual packaged
2.3 batch: Collection of units of product, rna-de from
quantity
rings, pellets or powder
a Single uniform melt.
2.4 consignment: Quantity of product, consisting
of one or more batches, of the same grade delivered
4.2 Selection of the batch Sample
at the same time, by the supplier to the purchaser.
Select the batch Sample as follows:
2.5 batch Sample: One or more units of product
selected at random from the batch and considered, in
a) where the batch consists of up to 4 units of prod-
total, to be representative of the batch.
uct, select allthe units;
2.6 test Sample stick: Stick of solder prepared by
b) where the batch consists of over 4, up to and in-
melting the
...