Investigation of brazeability with spreading and gap-filling test (ISO 5179:2021)

This document specifies three test methods for investigating brazeability.
A spreading test shows testing method with measurement of the spread area of the filler metals.
A T-joint test describes a scheme to construct a T-shape design by the test pieces and a testing method.
A varying gap test describes a test piece and a testing method for assessing the influence of the various parameters which can influence brazing during manufacture as a function of clearances.

Untersuchung der Hartlötbarkeit anhand der Verteilung und mittels des Spaltfüllverfahrens (ISO 5179:2021)

Dieses Dokument legt drei Prüfverfahren zur Untersuchung der Hartlötbarkeit fest.
Eine Verteilungsprüfung ist ein Prüfverfahren, bei dem die Ausbreitungsfläche des Hartlotes gemessen wird.
Eine T Fugen-Prüfung beschreibt ein Schema, um eine T Form durch Prüfproben herzustellen, und ein Prüfverfahren.
Ein Prüfverfahren mit wechselnder Spaltbreite beschreibt eine Prüfprobe und ein Prüfverfahren, um den Einfluss der unterschiedlichen Parameter, die das Hartlöten während der Fertigung beeinflussen können, als Funktion von Abständen zu untersuchen.

Étude de l'aptitude au brasage au moyen d'un essai de mouillage et de capillarité (ISO 5179:2021)

Le présent document spécifie trois méthodes d'essai pour étudier l'aptitude au brasage fort.
Un essai de mouillage présente une méthode d'essai avec mesure de la zone de mouillage des métaux d'apport.
Un essai avec un assemblage en T décrit un schéma de conception et une méthode d'essai pour des éprouvettes en T.
Un essai avec éprouvette à jeu variable décrit une éprouvette et une méthode d’essai pour évaluer l’influence des différents paramètres qui peuvent agir sur le brasage fort lors de son exécution en fonction des jeux.

Preskus spajkalnosti z omočljivostjo in s kapilarnostjo v ozki reži (ISO 5179:2021)

Ta dokument določa tri preskusne metode za preskušanje spajkalnosti.
Preskus omočljivosti prikazuje preskusno metodo z merjenjem območja omočljivosti dodajnih materialov.
Preskus T-spoja opisuje shemo za izdelavo zasnove v obliki črke T iz preskušancev in preskusno metodo. Preskus variabilne vrzeli opisuje preskušanec in preskusno metodo za ocenjevanje vpliva različnih parametrov na spajkanje med izdelavo kot funkcijo odmikov.

General Information

Status
Published
Public Enquiry End Date
02-Feb-2023
Publication Date
01-Jun-2023
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
23-May-2023
Due Date
28-Jul-2023
Completion Date
02-Jun-2023

Buy Standard

Standard
EN ISO 5179:2023
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 5179:2023
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5179:2023
01-julij-2023
Preskus spajkalnosti z omočljivostjo in s kapilarnostjo v ozki reži (ISO 5179:2021)
Investigation of brazeability with spreading and gap-filling test (ISO 5179:2021)
Untersuchung der Hartlötbarkeit anhand der Verteilung und mittels des
Spaltfüllverfahrens (ISO 5179:2021)
Étude de l'aptitude au brasage au moyen d'un essai de mouillage et de capillarité (ISO
5179:2021)
Ta slovenski standard je istoveten z: EN ISO 5179:2023
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
SIST EN ISO 5179:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 5179:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 5179:2023


EN ISO 5179
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2023
EUROPÄISCHE NORM
ICS 25.160.50
English Version

Investigation of brazeability with spreading and gap-filling
test (ISO 5179:2021)
Étude de l'aptitude au brasage au moyen d'un essai de Untersuchung der Hartlötbarkeit anhand der
mouillage et de capillarité (ISO 5179:2021) Verteilung und mittels der Spaltfüllprüfung (ISO
5179:2021)
This European Standard was approved by CEN on 7 May 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5179:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 5179:2023
EN ISO 5179:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 5179:2023
EN ISO 5179:2023 (E)
European foreword
The text of ISO 5179:2021 has been prepared by Technical Committee ISO/TC 44 "Welding and allied
processes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 5179:2023 by Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat
of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2023, and conflicting national standards
shall be withdrawn at the latest by November 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 5179:2021 has been approved by CEN as EN ISO 5179:2023 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 5179:2023

---------------------- Page: 6 ----------------------
SIST EN ISO 5179:2023
INTERNATIONAL ISO
STANDARD 5179
Second edition
2021-03
Investigation of brazeability with
spreading and gap-filling test
Étude de l'aptitude au brasage au moyen d'un essai de mouillage et
de capillarité
Reference number
ISO 5179:2021(E)
©
ISO 2021

---------------------- Page: 7 ----------------------
SIST EN ISO 5179:2023
ISO 5179:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 5179:2023
ISO 5179:2021(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Description of the test piece . 1
4.1 Spreading test piece. 1
4.2 Gap filling test . 2
4.2.1 T-joint test piece . 2
4.2.2 Varying gap test piece . 2
5 Purpose of the test . 3
6 Preparation of test piece . 3
7 Brazing cycle . 3
8 Examination . 4
8.1 Spreading test piece. 4
8.2 T-joint test piece . . 4
8.3 Varying gap test piece . 4
9 Micrographic inspection for varying gap test. 4
9.1 Varying gap test piece . 4
10 Results . 4
Bibliography .12
© ISO 2021 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 5179:2023
ISO 5179:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 13, Brazing materials and processes.
This second edition cancels and replaces the first edition (ISO 5179:1983), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— the spreading test has been added;
— the T-joint test has been added.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at https:// www .iso .org/ members .html.
Official interpretations of ISO/TC 44 documents, where they exist, are available from this page: https://
committee .iso .org/ sites/ tc44/ home/ interpretation .html.
iv © ISO 2021 – All rights reserved

---------------------- Page: 10 ----------------------
SIST EN ISO 5179:2023
ISO 5179:2021(E)

Introduction
When designing and making a brazed joint, quite apart from the physical properties of the brazing
alloy and the mechanical properties which can be expected from the joint, it is important to know
the brazeability as a function of the operating conditions adop
...

SLOVENSKI STANDARD
oSIST prEN ISO 5179:2023
01-januar-2023
[Not translated]
Investigation of brazeability with spreading and gap-filling test (ISO 5179:2021)
Untersuchung der Hartlötbarkeit anhand der Verteilung und mittels des
Spaltfüllverfahrens (ISO 5179:2021)
Étude de l'aptitude au brasage au moyen d'un essai de mouillage et de capillarité (ISO
5179:2021)
Ta slovenski standard je istoveten z: prEN ISO 5179
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
oSIST prEN ISO 5179:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 5179:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 5179:2023
INTERNATIONAL ISO
STANDARD 5179
Second edition
2021-03
Investigation of brazeability with
spreading and gap-filling test
Étude de l'aptitude au brasage au moyen d'un essai de mouillage et
de capillarité
Reference number
ISO 5179:2021(E)
©
ISO 2021

---------------------- Page: 3 ----------------------
oSIST prEN ISO 5179:2023
ISO 5179:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 5179:2023
ISO 5179:2021(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Description of the test piece . 1
4.1 Spreading test piece. 1
4.2 Gap filling test . 2
4.2.1 T-joint test piece . 2
4.2.2 Varying gap test piece . 2
5 Purpose of the test . 3
6 Preparation of test piece . 3
7 Brazing cycle . 3
8 Examination . 4
8.1 Spreading test piece. 4
8.2 T-joint test piece . . 4
8.3 Varying gap test piece . 4
9 Micrographic inspection for varying gap test. 4
9.1 Varying gap test piece . 4
10 Results . 4
Bibliography .12
© ISO 2021 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 5179:2023
ISO 5179:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 13, Brazing materials and processes.
This second edition cancels and replaces the first edition (ISO 5179:1983), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— the spreading test has been added;
— the T-joint test has been added.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at https:// www .iso .org/ members .html.
Official interpretations of ISO/TC 44 documents, where they exist, are available from this page: https://
committee .iso .org/ sites/ tc44/ home/ interpretation .html.
iv © ISO 2021 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 5179:2023
ISO 5179:2021(E)

Introduction
When designing and making a brazed joint, quite apart from the physical properties of the brazing
alloy and the mechanical properties which can be expected from the joint, it is important to know
the brazeability as a function of the operating conditions adopted. The determination of wettability
has already been the subject of numerous investigations and proposals regarding testing methods. In
carrying out these investigations, the most frequently used methods are based on the spreading of a
drop, or on the measurement of surface tension, but they in fact only take one element of the problem
into account. It is important to know not only the way in which the liquid filler metal wets the surface of
the parent material but also how this same liquid filler metal behaves in a given gap between the joint
components when diffusion takes place.
In this document, brazeability is defined as a total degree of joinability. The joinability consists of both
wettability and fluidity to permit distribution into a joint, i.e. ability to fill a joint gap, although total
brazeability includes performance of the physical, and mechanical properties in services.
As the tests to be designated for brazeability, three methods are introduced in this document. The
traditional varying gap test is described for the most real ability to fill the gap, but it requires a private
sample preparation and special evaluation technique with X-ray device. The T-joint test is newly
developed to investigate ability to fill the gap in an easier manner. It can be easily operated at industrial
laboratories. Moreover, a simple spreading test is designated for practical convenience.
© ISO 2021 – All rights reserved v

---------------------- Page: 7 ----------------------
oSIST prEN ISO 5179:2023

---------------------- Page: 8 ----------------------
oSIST prEN ISO 5179:2023
INTERNATIONAL STANDARD ISO 5179:2021(E)
Investigation of brazeability with spreading and gap-
filling test
1 Scope
This document specifies three test methods for investigating brazeability.
A spreading test shows testing method with measurement of the spread area of the filler metals.
A T-joint test describes a scheme to construct a T-shape design by the test pieces and a testing method.
A varying gap test describes a test piece and a testing m
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.