SIST EN 13672:2005
(Main)Surfaces for sports areas - Determination of resistance to abrasion of non-filled synthetic turf
Surfaces for sports areas - Determination of resistance to abrasion of non-filled synthetic turf
This document describes a method for the determination of the wear resistance of a non-filled synthetic turf surface using an abrasive wheel under laboratory conditions. It is applicable to non-filled synthetic turf with a pile height greater than 15 mm.
Sportböden - Bestimmung des Verschleißverhaltens von ungefülltem Kunststoffrasen
Dieses Dokument beschreibt ein Verfahren zur Bestimmung des Verschleißwiderstandes von ungefülltem Kunststoffrasenbelag unter Laborbedingungen mit Hilfe von Reibrädern. Sie ist anwendbar auf ungefüllten Kunststoffrasen mit einer Höhe der Polschicht von mehr als 15 mm
Sols sportifs - Détermination de la résistance a l'abrasion des gazons synthétiques non chargés
La présente norme européenne décrit une méthode permettant de déterminer la résistance a l'abrasion d'un gazon synthétique non chargé en laboratoire, en utilisant une meule abrasive. Elle peut s'appliquer aux gazons synthétiques non chargés d'une hauteur de fibres supérieure a 15 mm.
Podloge za športne dejavnosti – Ugotavljanje odpornosti proti obrusu umetne trave, ki ni polnjena s peskom
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Podloge za športne dejavnosti – Ugotavljanje odpornosti proti obrusu umetne trave, ki ni polnjena s peskomSportböden - Bestimmung des Verschleißverhaltens von ungefülltem KunststoffrasenSols sportifs - Détermination de la résistance a l'abrasion des gazons synthétiques non chargésSurfaces for sports areas - Determination of resistance to abrasion of non-filled synthetic turf97.220.10Športni objektiSports facilitiesICS:Ta slovenski standard je istoveten z:EN 13672:2004SIST EN 13672:2005en,fr,de01-januar-2005SIST EN 13672:2005SLOVENSKI
STANDARD
SIST EN 13672:2005
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13672August 2004ICSEnglish versionSurfaces for sports areas - Determination of resistance toabrasion of non-filled synthetic turfSols sportifs - Détermination de la résistance à l'abrasiondes gazons synthétiques non chargésSportböden - Bestimmung des Verschleißverhaltens vonungefülltem KunststoffrasenThis European Standard was approved by CEN on 14 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13672:2004: ESIST EN 13672:2005
EN 13672:2004 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Apparatus.4 6 Sampling and preparation of test pieces.4 7 Conditioning.4 8 Procedure.5 9 Calculation and expression of results.5 10 Test report.5
SIST EN 13672:2005
EN 13672:2004 (E) 3 Foreword This document (EN 13672:2004)
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.