SIST EN 15685:2025
(Main)Building hardware - Requirements and test methods - Multipoint locks, latches and locking plates - Characteristics and test methods
Building hardware - Requirements and test methods - Multipoint locks, latches and locking plates - Characteristics and test methods
This document specifies product characteristics and test methods of mechanically operated multipoint
locks and their locking plates.
This document covers multipoint locks their locking plates which are either manufactured and placed on
the market in their entirety by one producer or assembled from sub-assemblies produced by more than
one producer and designed to be used in combination.
This document does not cover assessment of the contribution of the product to the fire resistance of
specific fire resistance and/or smoke control door set assemblies.
This document is not applicable to mechanically/electromechanically cylinders, handles, locks for
windows, padlocks, locks for safes, furniture locks or prison locks.
This document does not specify mechanically operated locks or their locking plates which are specified
by EN 12209.
Schlösser und Baubeschläge - Mehrfachverriegelungs-Schlösser und Schließbleche - Anforderungen und Prüfverfahren
Dieses Dokument legt Produktmerkmale und Prüfverfahren für mechanisch betätigte Mehrfach-verriegelungen und deren Schließbleche fest:
a) zur Verwendung an Türen in Gebäuden;
b) zur Verwendung an Türen zwischen Brand und Rauchabschnitten, die mit Türschließmitteln ausgestattet sind, damit diese Türen zuverlässig schließen und ein selbsttätiges Schließen im Brandfall erreicht wird;
c) zur Verwendung an verschlossenen Brandschutztüren, um die Integrität der Tür aufrechtzuerhalten.
Dieses Dokument deckt Mehrfachverriegelungen und deren Schließbleche ab, die entweder in ihrer Gesamtheit durch einen Hersteller gefertigt und in den Handel gebracht werden oder durch mehr als einen Hersteller aus Baugruppen montiert werden und dazu ausgelegt sind, als Kombination verwendet zu werden.
Dieses Dokument umfasst nicht die Bewertung des Produktbeitrags zum Feuerwiderstand von bestimmten Feuerschutz und/oder Rauchschutztürelementen.
Dieses Dokument gilt nicht für mechanische/elektromechanische Schließzylinder, Türdrücker, Fensterriegel, Vorhängeschlösser, Tresorschlösser, Möbelschlösser oder Gefängnisschlösser.
Dieses Dokument trifft keine Festlegungen für mechanisch betätigte Schlösser und deren Schließbleche, die durch EN 12209 behandelt werden.
Quincaillerie pour le batiment - Serrures multipoints et leurs gaches - Prescriptions et méthodes d'essais
Le présent document spécifie les caractéristiques de produit et les méthodes d’essai relatives aux serrures mécaniques multipoints et à leurs gâches :
a) dans le cadre d’une utilisation sur des portes dans des bâtiments ;
b) dans le cadre d’une utilisation sur des portes de cloisonnement résistant au feu/aux fumées munies de dispositifs de fermeture de porte, pour permettre à ces portes de se fermer et de satisfaire ainsi aux exigences de fermeture automatique en cas d’incendie ;
c) dans le cadre d’une utilisation sur des portes coupe-feu verrouillées, pour garantir l’étanchéité au feu du bloc-porte.
Le présent document s’applique aux serrures multipoints et à leurs gâches qui sont soit fabriquées et placées sur le marché dans leur ensemble par un seul fabricant, soit assemblées à partir de sous-ensembles produits par plus d’un fabricant et conçus pour être utilisées en combinaison.
Le présent document ne couvre pas l’évaluation de la contribution du produit à la résistance au feu de blocs-portes coupe-feu et étanches aux fumées spécifiques.
Le présent document ne s’applique pas aux cylindres mécaniques/électromécaniques, béquilles, serrures pour fenêtres, cadenas, serrures pour coffres-forts, serrures de meubles ou serrures de prison.
Le présent document ne spécifie pas de serrures mécaniques ou leurs gâches objets de l’EN 12209.
Stavbno okovje - Zahteve in preskusne metode - Večtočkovne ključavnice, zapahi in varovalne podložke - Značilnosti in preskusne metode
Ta dokument določa značilnosti izdelka in preskusne metode za mehanske večtočkovne
ključavnice in njihove varovalne podložke.
Ta dokument obravnava večtočkovne ključavnice in njihove varovalne podložke, ki jih je v celoti izdelal in uvedel na trg en proizvajalec ali so bile sestavljene iz podsestavov, ki jih je izdelal več kot en proizvajalec, in zasnovane za skupno uporabo.
Ta dokument ne zajema ocene o prispevku izdelka k požarni odpornosti določenega požarno odpornega in/ali za dim neprepustnega sestava vrat.
Ta dokument se ne uporablja za mehanske/elektromehanske cilindrske ključavnice, ključavnice za okna, obešanke, ključavnice za sefe, ključavnice za pohištvo ali ključavnice za zapore.
Ta dokument ne določa mehanskih ključavnic ali njihovih prijemnikov, ki so opredeljeni v standardu EN 12209.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2025
Stavbno okovje - Zahteve in preskusne metode - Večtočkovne ključavnice, zapahi
in varovalne podložke - Značilnosti in preskusne metode
Building hardware - Requirements and test methods - Multipoint locks, latches and
locking plates - Characteristics and test methods
Schlösser und Baubeschläge - Mehrfachverriegelungs-Schlösser und Schließbleche -
Anforderungen und Prüfverfahren
Quincaillerie pour le batiment - Serrures multipoints et leurs gaches - Prescriptions et
méthodes d'essais
Ta slovenski standard je istoveten z: EN 15685:2024
ICS:
91.190 Stavbna oprema Building accessories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 15685
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 91.190
English Version
Building hardware - Requirements and test methods -
Multipoint locks, latches and locking plates -
Characteristics and test methods
Quincaillerie pour le bâtiment - Serrures multipoints et Schlösser und Baubeschläge - Mehrfachverriegelungs-
leurs gâches - Prescriptions et méthodes d'essais Schlösser und Schließbleche - Anforderungen und
Prüfverfahren
This European Standard was approved by CEN on 27 February 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15685:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 6
Introduction . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions, symbols and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Symbols and abbreviated terms . 12
4 Product characteristics . 13
4.1 General. 13
4.1.1 Dangerous substances. 13
4.1.2 Return force of latch bolt . 13
4.1.3 Strength of lever lock key . 14
4.1.4 Strength of bolt action . 14
4.1.5 Minimum follower restoring torque . 14
4.2 Category of use (first digit) . 14
4.2.1 Resistance to side force on latch bolt . 14
4.2.2 Torque to operate the multipoint lock. 15
4.2.3 Strength of follower stops . 19
4.2.4 Torque resistance of lockable deadbolt operation by handle/knob . 20
4.3 Durability characteristics (second digit) . 22
4.3.1 Durability of latch action. 22
4.3.2 Durability of locking action . 22
4.3.3 Durability of locking snib mechanism . 22
4.3.4 Durability of clenching . 22
4.4 Door mass and closing force (third digit) . 23
4.4.1 Door mass . 23
4.4.2 Door closing force . 23
4.5 Suitability for use on fire resistance and/or smoke control door set (forth digit) . 23
4.5.1 General. 23
4.5.2 Grade 0 . 23
4.5.3 Grade A . 24
4.5.4 Grade B . 24
4.5.5 Grade N . 24
4.6 Safety (fifth digit) . 24
4.7 Corrosion resistance and temperature (sixth digit) . 24
4.7.1 Corrosion resistance . 24
4.7.2 Operation at extreme temperatures . 25
4.8 Security of locking point (seventh digit) . 25
4.8.1 General. 25
4.8.2 Locking. 25
4.8.3 Deadlocking . 25
4.8.4 Characteristics to side force . 26
4.8.5 Locking point projection . 27
4.8.6 Resistance to disengaging force on locking point . 28
4.8.7 Resistance to drilling and disengaging force on locking point . 29
4.8.8 Strong key attack on lever locks . 30
4.8.9 Torque resistance of lockable follower . 31
4.8.10 Resistance to force on a box protected locking plate . 32
4.8.11 Resistance to side force on locking plate . 33
4.8.12 Protection against removal from door . 33
4.9 Key identification of lever locks (eight digit) . 34
4.9.1 Minimum number of detaining elements . 34
4.9.2 Effective differs . 34
4.9.3 Differing steps heights on key . 35
4.9.4 Non-interpassing of key with just one interval differ . 35
4.9.5 Coding protection . 35
4.10 Security of anti-separation point (nine digit) . 35
4.10.1 General . 35
4.10.2 Anti-separation point bolt projection . 35
4.10.3 Resistance to disengaging force of anti-separation point . 36
4.10.4 Resistance to drilling and disengaging force of anti-separation point . 37
4.10.5 Resistance to pulling force of anti-separation point . 38
4.10.6 Resistance to drilling and pulling force of anti-separation point . 39
4.10.7 Resistance to forcing of anti-lifting device for sliding door . 40
4.10.8 Resistance to forcing of anti-lifting device with drill protection for sliding door . 40
4.10.9 Resistance to pulling force on locking plate for anti-separation point . 41
4.10.10 Resistance to anti-lifting force on locking plate . 41
4.11 Clenching (tenth digit) . 43
5 Testing, assessment and sampling methods . 43
5.1 General . 43
5.2 Test apparatus . 44
5.2.1 Test door . 44
5.2.2 Drilling machine. 44
5.2.3 Test fixtures . 45
5.3 Test procedure – Drilling procedure . 45
5.4 Test methods – General . 45
5.4.1 Dangerous substances . 45
5.4.2 Return force of latch bolt .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.