SIST EN 12721:2009
Furniture - Assessment of surface resistance to wet heat
Furniture - Assessment of surface resistance to wet heat
This European standard specifies a method for the assessment of the resistance to wet heat of all rigid furniture surfaces regardless of materials. It does not apply to leather and textile surfaces. The test is intended to be carried out on a part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test. The test should be carried out on unused surfaces. Annex A (informative) describes a direct light source.
Möbel - Bewertung der Beständigkeit von Oberflächen gegen feuchte Hitze
Diese Europäische Norm legt ein Bewertungsverfahren für die Beständigkeit von Oberflächen gegen feuchte
Hitze fest und gilt für starre Oberflächen von oberflächenbehandelten Möbeln unabhängig vom verwendeten
Werkstoff, außer für Oberflächen aus Leder und Textilien.
Die Prüfungen werden gewöhnlich am Möbel durchgeführt, können aber auch an Prüfkörpern durchgeführt
werden, die aus dem gleichen Werkstoff mit identischer Oberflächenbehandlung wie das Möbel und groß
genug sind, um den Anforderungen der Prüfung zu entsprechen.
Die Prüfung muss auf unbenutzten Oberflächen durchgeführt werden.
Meubles - Évaluation de la résistance de la surface a la chaleur humide
La présente Norme européenne spécifie une méthode d’évaluation de la résistance de la surface a la chaleur
humide et s’applique aux surfaces rigides de tous les produits finis, indépendamment des matériaux.
Elle ne s’applique pas aux finitions appliquées sur le cuir ou les textiles.
L’essai est destiné a etre réalisé sur une partie du meuble fini mais il peut etre effectué sur des panneaux
d’essai constitués du meme matériau, de finition identique au produit fini et de dimensions suffisantes pour
satisfaire aux spécifications de l’essai.
L’essai doit etre conduit sur des surfaces neuves.
Pohištvo - Ocenjevanje odpornosti površine proti vlažni toploti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pohištvo - Ocenjevanje odpornosti površine proti vlažni toplotiMöbel - Bewertung der Beständigkeit von Oberflächen gegen feuchte HitzeMeubles - Évaluation de la résistance de la surface a la chaleur humideFurniture - Assessment of surface resistance to wet heat97.140PohištvoFurnitureICS:Ta slovenski standard je istoveten z:EN 12721:2009SIST EN 12721:2009en,fr,de01-junij-2009SIST EN 12721:2009SLOVENSKI
STANDARDSIST EN 12721:19971DGRPHãþD
SIST EN 12721:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12721February 2009ICS 97.140Supersedes EN 12721:1997
English VersionFurniture - Assessment of surface resistance to wet heatMeubles - Évaluation de la résistance de la surface à lachaleur humideMöbel - Bewertung der Beständigkeit von Oberflächengegen feuchte HitzeThis European Standard was approved by CEN on 3 January 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12721:2009: ESIST EN 12721:2009
EN 12721:2009 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Principle .5 5 Apparatus and materials .5 5.1 Thermometer .5 5.2 Heat source .5 5.3 Oven .6 5.4 Cleaning cloth .6 5.5 White polyamide fibre cloth .6 5.6 Deionized or distilled water .7 5.7 Heat-insulating foam .7 5.8 Diffuse light source .7 6 Preparation and conditioning .7 6.1 Conditioning .7 6.2 Test surface .7 7 Test procedure .7 7.1 Testing .7 7.2 Test temperatures .8 8 Examination of the test panel .8 9 Assessment of results .8 10 Test report .9 Annex A (informative)
Direct light source. 10 A.1 General . 10 A.2 Apparatus . 10 Annex B (informative)
Significant technical changes in revised edition of this standard . 12 Bibliography . 13
Tables Table 1 — Descriptive numerical rating code .8
Figures Figure 1 — Aluminium block used as heat source .6 Figure A.1 — Viewing cabinet . 11
SIST EN 12721:2009
EN 12721:2009(E) 3 Foreword This document (EN 12721:2009) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at the latest by August 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12721:1997. Informative Annex B provides details of significant technical changes between this European Standard and the previous edition. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 12721:2009
EN 12721:2009 (E) 4
1 Scope This European standard specifies a method for the assessment of the resistance to wet heat of all rigid furniture surfaces regardless of materials. It does not apply to leather and textile surfaces. The test is intended to be carried out on a part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test. The test should be carried out on unused surfaces. Annex A (informative) describes a direct light source. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 4287:1998, Geometrical Product Specifications (GPS) – Surface texture: Profile method – Terms, definitions and surface texture parameters (ISO 4287:1997) EN ISO 4288:1997, Geometrical Product Specifications (GPS) – Surface texture: Profile method – Rules and procedures for the assessment of surface texture (ISO 4288:1996) ISO 209:2007, Aluminium and aluminium alloys – Chemical composition ISO 1770:1981, Solid-stem general purpose thermometers 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 test panel panel including
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.