SIST EN 2868:2019

Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal across flats, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient temperature)/650 °C

This document specifies the characteristics of hexagonal slotted/castellated nuts, normal height, normal across flats, in heat resisting steel, silver plated.
Classification: 1 100 MPa/650 °C.

Luft- und Raumfahrt - Flache Kronenmuttern, normale Höhe, normale Schlüsselweite, aus hochwarmfestem Stahl, versilbert - Klasse: 1 100 MPa (bei Raumtemperatur)/650 °C

Diese Europäische Norm legt die Eigenschaften von flachen, versilberten Kronenmuttern mit normaler Höhe, normaler Schlüsselweite aus hochwarmfestem Stahl für Anwendungen in der Luft- und Raumfahrt fest.
Klasse: 1 100 MPa1/650 °C2.

Série aérospatiale - Écrous hexagonaux à créneaux, hauteur normale, surplats normaux, en acier résistant à chaud, argentés - Classification: 1 100 MPa (à température ambiante)/650 °C

Aeronavtika - Matice, šestrobe, z zarezo/kronske, normalna višina, z normalnim zevom ključa, iz toplotnoodpornega jekla, posrebrene - Klasifikacija: 1100 MPa (pri okoljski temperaturi)/650 °C

Ta dokument določa lastnosti šestrobih matic z zarezo/kronskih, normalne višine, z normalnim zevom ključa, iz toplotnoodpornega jekla, posrebrenih.
Klasifikacija: 1100 MPa/650 °C.

General Information

• Status: Published
• Publication Date: 20-Mar-2019
• ICS: 49.030.30 - Nuts
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 15-Mar-2019
• Due Date: 20-May-2019
• Completion Date: 21-Mar-2019
• Ref Project: EN 2868:2019 - Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal across flats, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient temperature)/650 °C

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2868:2019
01-maj-2019
$HURQDYWLND0DWLFHãHVWUREH]]DUH]RNURQVNHQRUPDOQDYLãLQD]QRUPDOQLP
]HYRPNOMXþDL]WRSORWQRRGSRUQHJDMHNODSRVUHEUHQH.ODVLILNDFLMD03DSUL
RNROMVNLWHPSHUDWXULƒ&
Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal across
flats, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient
temperature)/650 °C
Luft- und Raumfahrt - Flache Kronenmuttern, normale Höhe, normale Schlüsselweite,
aus hochwarmfestem Stahl, versilbert - Klasse: 1 100 MPa (bei Raumtemperatur)/650 °C
Série aérospatiale - Écrous hexagonaux à créneaux, hauteur normale, surplats normaux,
en acier résistant à chaud, argentés - Classification: 1 100 MPa (à température
ambiante)/650 °C
Ta slovenski standard je istoveten z: EN 2868:2019
ICS:
49.030.30 Matice Nuts
SIST EN 2868:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 2868:2019

---------------------- Page: 2 ----------------------

SIST EN 2868:2019


EN 2868
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2019
EUROPÄISCHE NORM
ICS 49.030.30
English Version

Aerospace series - Nuts, hexagonal, slotted/castellated,
normal height, normal across flats, in heat resisting steel,
silver plated - Classification: 1 100 MPa (at ambient
temperature)/650 °C
Série aérospatiale - Écrous hexagonaux à créneaux, Luft- und Raumfahrt - Flache Kronenmuttern, normale
hauteur normale, surplats normaux, en acier résistant Höhe, normale Schlüsselweite, aus hochwarmfestem
à chaud, argentés - Classification: 1 100 MPa (à Stahl, versilbert - Klasse: 1 100 MPa (bei
température ambiante)/650 °C Raumtemperatur)/650 °C
This European Standard was approved by CEN on 8 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2868:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 2868:2019
EN 2868:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
5 Designation. 8
6 Marking . 8
7 Technical specification . 8

2

---------------------- Page: 4 ----------------------

SIST EN 2868:2019
EN 2868:2019 (E)
European foreword
This document (EN 2868:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2019, and conflicting national standards
shall be withdrawn at the latest by September 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN 2868:2019
EN 2868:2019 (E)
1 Scope
This European standard specifies the characteristics of hexagonal slotted/castellated nuts, nor
...